Air Wisconsin Pilot Interview Questions & Hiring Requirements

Short answer: Preparing for an Air Wisconsin pilot interview starts with verifying that your logbook meets the federal Airline Transport Pilot (ATP) or Restricted ATP minimums under 14 CFR 61.159 and 61.160 and that your training and safety records are accurate in the FAA Pilot Records Database under 14 CFR Part 111. Your interview preparation should focus on walking through your aviation background, explaining how you apply crew resource management in a two-pilot cockpit, and answering technical questions on instrument procedures and multiengine operations.

How to prepare for your regional pilot interview

When you sit down for a regional airline interview with a carrier such as Air Wisconsin, the panel is looking at two things: whether your paper qualifications and logbook cleanly meet federal Part 121 standards, and how you think, communicate, and manage risk as a professional crewmember. Rather than memorizing scripted responses, you will do best by organizing your real flying experiences into clear stories and brushing up on core instrument and multiengine regulations.

Use the checklist below to organize your preparation over the two weeks leading up to your conversation.

  • Confirm that your total time, cross-country, night, instrument, and multiengine hours meet the exact thresholds in 14 CFR 61.159 or 14 CFR 61.160.
  • Log into the FAA Pilot Records Database (PRD) at least 7 days in advance as required by 14 CFR 111.305(c) to review your FAA certificate, checkride, and employment history records.
  • Audit your personal documents, including your FAA First Class Medical Certificate, pilot certificate, FCC radiotelephone permit, government driver's license, and valid passport.
  • Review the aeronautical knowledge areas listed under 14 CFR 61.155(c), focusing on meteorology, windshear avoidance, weight and balance, and air traffic control procedures.
  • Prepare 4 to 6 real-world flying stories from your time instructing or flying under Part 91 or Part 135 that show sound aeronautical decision-making, checklist discipline, and clear communication.
  • Practice explaining any practical test failures or training hurdles honestly, focusing on what you changed in your study habits and preflight routines afterward.

ATP and Restricted ATP flight hour minimums (14 CFR 61.159 & 61.160)

To serve as second in command in Part 121 air carrier operations under 14 CFR 121.436(b), you must hold an Airline Transport Pilot certificate and an appropriate aircraft type rating (a second-in-command type rating obtained under 14 CFR 61.55 does not satisfy this requirement). Under 14 CFR 61.153, you must be at least 23 years old for an unrestricted ATP certificate under 14 CFR 61.159, or at least 21 years old for a Restricted Privileges ATP (R-ATP) certificate under 14 CFR 61.160. You must also read, speak, write, and understand the English language, hold a commercial pilot certificate with an instrument rating (or qualifying military or foreign equivalent), and complete an Airline Transport Pilot Certification Training Program (ATP-CTP) under 14 CFR 61.156 before taking the ATP knowledge test.

Every applicant for an airplane category multiengine class rating under 14 CFR 61.159 or 61.160 must log specific aeronautical experience. Up to 100 hours of your total aeronautical experience may be obtained in a full flight simulator or flight training device representing an airplane if completed as part of an approved training course under Parts 121, 135, 141, or 142. By our calculation from 14 CFR 61.159 and 14 CFR 61.160, qualifying for the Restricted ATP cross-country rule reduces your required cross-country time by 300 hours (a 60 percent reduction from 500 hours down to 200 hours), though under 14 CFR 61.159(a)(5)(i) your 250 hours of airplane PIC time must still include at least 100 PIC cross-country hours and 25 PIC night hours.

Before your interview logbook review, verify these specific sub-column rules and allowances under 14 CFR 61.159 and 61.160:

  • Class flight time and simulator credit (14 CFR 61.159(a)(3)): You need at least 50 hours in the class of airplane for the rating sought (multiengine land). At most 25 hours in a full flight simulator representing that class may be credited from an approved Part 121, 135, 141, or 142 course. A flight training device (FTD) or aviation training device (ATD) cannot satisfy the 50-hour class requirement.
  • Instrument simulator limits (14 CFR 61.159(a)(4)): You need 75 hours of actual or simulated instrument time. You may credit at most 25 hours in a full flight simulator or FTD, or up to 50 hours if completed in a Part 142 certificated training center course.
  • Night landing substitution (14 CFR 61.159(b)): If you have logged at least 20 night takeoffs and landings to a full stop, you may substitute each additional night takeoff and landing to a full stop for 1 hour of night flight time, up to 25 hours toward the 100-hour night requirement.
  • Part 135 SIC Professional Development Program (14 CFR 61.159(c)): Commercial pilots employed by a Part 119 certificate holder conducting Part 135 operations may log second-in-command time under an FAA-approved SIC PDP (14 CFR 135.99), but it cannot be logged as PIC time or used to meet the 250-hour airplane PIC requirement.
  • University R-ATP documentation (14 CFR 61.160(b)-(c)): To claim the 1,000-hour or 1,250-hour R-ATP tier, your commercial and instrument ground and flight training must have been completed as part of an approved Part 141 curriculum at the institution (or an affiliated Part 141 school under 14 CFR 141.26), backed by official transcripts.

FAA ATP and Restricted ATP aeronautical experience tiers (14 CFR 61.159 and 61.160, current as of November 2026)

Qualification path Minimum age Total pilot time Cross-country time Airplane PIC time Night flight time Instrument time
Standard Unrestricted ATP (14 CFR 61.159) 23 years 1,500 hours 500 hours 250 hours 100 hours 75 hours
Standard Restricted ATP (14 CFR 61.160(f)) 21 years 1,500 hours 200 hours 250 hours 100 hours 75 hours
Associate degree in aviation major, 30+ semester credits (14 CFR 61.160(c) & (d)) 21 years 1,250 hours 200 hours 250 hours 100 hours 75 hours
Bachelor's degree in aviation major, 60+ semester credits (14 CFR 61.160(b)) 21 years 1,000 hours 200 hours 250 hours 100 hours 75 hours
U.S. Armed Forces rated military pilot graduate (14 CFR 61.160(a)) 21 years 750 hours 200 hours 250 hours 100 hours 75 hours

What the ATP-CTP course covers (14 CFR 61.156)

Before taking the FAA Airline Transport Pilot knowledge test for a multiengine airplane rating, 14 CFR 61.153(e) requires you to present a graduation certificate from an authorized Part 121, 135, 141, or 142 training provider showing completion of the ATP Certification Training Program (ATP-CTP).

Understanding the curriculum in 14 CFR 61.156 helps you anticipate the technical topics that come up in regional interviews. The rule mandates at least 30 hours of classroom academic instruction and at least 10 hours of training in a qualified flight simulation training device (40 hours minimum combined). By our calculation from 14 CFR 61.156(a), air carrier operations make up 46.7 percent of the required classroom hours (14 of the 30 minimum hours).

  • Aerodynamics and high-altitude operations (at least 8 classroom hours): High-altitude aerodynamics and stall characteristics.
  • Meteorology (at least 2 classroom hours): Adverse weather phenomena and weather detection systems.
  • Air carrier operations (at least 14 classroom hours): Physiology, communications, checklist philosophy, operational control, minimum equipment list (MEL) and configuration deviation list (CDL), ground operations, turbine engines, transport category aircraft performance, and automation, navigation, and flight path warning systems.
  • Leadership and CRM (at least 6 classroom hours): Leadership, professional development, crew resource management, and safety culture.
  • Full flight simulator training (at least 6 of the 10 FSTD hours): Conducted in a Level C or higher full flight simulator representing a multiengine turbine airplane with a maximum takeoff weight of 40,000 pounds or greater, covering low energy states and stalls, upset recovery techniques, and adverse weather conditions including icing, thunderstorms, and gusty crosswinds.
  • FSTD navigation and automation (remaining 4 FSTD hours): Completed in a Level 4 or higher flight simulation training device covering flight management systems (FMS) and autoflight.

Part 135 transition and Captain upgrade requirements (14 CFR 121.436)

If you are interviewing at a regional carrier with prior turbine experience and want to know when you can upgrade to Captain (or qualify as a direct-entry Captain), the controlling rule is 14 CFR 121.436. To act as pilot in command in Part 121 operations, you must hold an unrestricted ATP certificate (not subject to the R-ATP limitations of 14 CFR 61.167), hold an appropriate aircraft type rating, and have at least 1,000 hours of qualifying air carrier or multi-crew turbine experience.

Be ready during your interview to show how your logged hours map to the five qualifying categories in 14 CFR 121.436(a)(3) and (c):

  • Part 121 Second in Command: Hours flown as SIC in Part 121 operations (14 CFR 121.436(a)(3)(i)).
  • Part 91 Subpart K PIC: Hours flown as PIC in fractional ownership operations under 14 CFR 91.1053(a)(2)(i).
  • Part 135 PIC requiring an ATP: Hours flown as PIC under 14 CFR 135.243(a)(1), covering passenger-carrying operations in a turbojet airplane, an airplane with a passenger-seat configuration of 10 seats or more (excluding crewmember seats), or a multiengine airplane in a Part 110 commuter operation.
  • Eligible On-Demand Part 135 PIC: Hours flown as PIC in eligible on-demand operations satisfying 14 CFR 135.4(a)(2)(ii)(A). Under 14 CFR 135.4, an eligible on-demand operation requires a two-pilot crew where the PIC has at least 1,500 hours total flight time (and holds an ATP with applicable type ratings for multiengine turbine fixed-wing aircraft) and the SIC has at least 500 hours.
  • Military PIC credit: Under 14 CFR 121.436(c), you may credit up to 500 hours of U.S. military flight time obtained as PIC in a multiengine, turbine-powered, fixed-wing airplane or powered-lift aircraft in an operation requiring more than one pilot.

Worked example: Calculating Part 121 PIC upgrade hours

Suppose you are a Part 135 and former military pilot preparing for your regional interview and want to calculate how many hours you need as a Part 121 First Officer before upgrading to Captain under 14 CFR 121.436.

Say your logbook shows 1,800 hours total time: 650 hours as military PIC in a multiengine turbine fixed-wing aircraft requiring two pilots, 300 hours as PIC in a single-pilot Part 135 cargo turboprop, and 250 hours as PIC in a two-pilot Part 135 passenger-carrying turbojet under 14 CFR 135.243(a)(1). Here is how the math works:

  • Step 1 (Military PIC cap): Although you have 650 hours of qualifying multi-crew turbine military PIC time, 14 CFR 121.436(c) caps military credit at 500 hours. You count 500 hours.
  • Step 2 (Single-pilot Part 135 cargo time): Your 300 hours of single-pilot turboprop cargo PIC time do not fall under 14 CFR 135.243(a)(1) (which requires passenger-carrying operations) or 14 CFR 135.4(a)(2)(ii)(A) (which requires a two-pilot crew). You count 0 hours.
  • Step 3 (Part 135 turbojet passenger PIC time): Your 250 hours of passenger-carrying turbojet PIC time meet 14 CFR 135.243(a)(1) and count in full under 14 CFR 121.436(a)(3)(iii). You add 250 hours.
  • Step 4 (Remaining Part 121 SIC time needed): Combining your 500 credited military hours and 250 qualifying Part 135 hours gives you 750 qualifying hours. Subtracting 750 from the 1,000-hour requirement in 14 CFR 121.436(a)(3) means you need 250 hours as Second in Command in Part 121 operations (plus an unrestricted ATP and aircraft type rating) to be eligible for Captain upgrade.

What technical and behavioral topics to practice

Airline interview panels evaluate your mastery of the aeronautical knowledge areas required for an ATP certificate under 14 CFR 61.155(c) alongside the operational rules of Parts 91, 121, and 135.

When answering technical questions, state the rule or procedure directly, then explain how it applies in flight. When answering behavioral questions, walk through the specific situation, the actions you took, the crew resource management principles you used, and what you learned.

  • Weather, icing, and windshear (14 CFR 61.155(c)(2)-(6) & 14 CFR 135.227): Be ready to read METARs, TAFs, and weather charts, explain frontal characteristics, and discuss windshear avoidance. Under 14 CFR 135.227(b), no pilot may take off when frost, ice, or snow may reasonably be expected to adhere to the airplane unless required deicing training and pre-takeoff checks are satisfied.
  • Instrument procedures and weather changes (14 CFR 61.155(c)(7)-(8)): Practice briefing an instrument approach chart from top to bottom. Under 14 CFR 135.225(d), know the conditions required to continue an instrument approach if you have begun the final approach segment and receive a later weather report showing conditions below minimums.
  • Pressurization and oxygen requirements (14 CFR 135.89): Review hypoxia symptoms and flight crew oxygen mask rules in pressurized aircraft, including the rules above 10,000 feet MSL cabin pressure altitude, above 25,000 feet MSL (quick-donning masks and single-pilot at controls rule), and above 35,000 feet MSL.
  • Sterile cockpit and critical phases of flight (14 CFR 135.100): Be prepared to discuss how you eliminate nonessential conversations and distractions during taxi, takeoff, landing, and low-altitude operations.
  • Crew resource management and aeronautical decision-making (14 CFR 61.155(c)(11)-(13)): Prepare concrete examples of a time you resolved a disagreement with another pilot, managed an in-flight abnormality using checklists, or delayed or diverted a flight due to weather or maintenance.

FAA Pilot Records Database (PRD) and background checks (14 CFR Part 111)

Before any Part 121 or Part 135 air carrier can allow you to begin service as a pilot, 14 CFR Part 111 requires the carrier to evaluate your records in the FAA Pilot Records Database (PRD). Beginning on September 9, 2024, the older Pilot Records Improvement Act (PRIA) ceased to be effective under 14 CFR 111.5(b).

Because interviewers compare your answers about checkrides and past jobs against your PRD file, review your own record before interviewing. Under 14 CFR 111.305(c), you must submit your electronic access application to the FAA at least 7 days before accessing the database. Under 14 CFR 111.310(a) and (b), no operator may pull your PRD file without your written consent and your affirmation that your preceding 5-year employment history is accurate. Under 14 CFR 111.105, 111.110, and 111.135, the hiring carrier evaluates:

  • FAA certificates and practical test failures: Current pilot and medical certificates, ratings, limitations, and any failed attempt to pass a practical test under Part 61 (14 CFR 111.135(a)-(b)).
  • Enforcement actions and accidents: Unoverturned FAA enforcement findings and records of acting as PIC or SIC during an aviation accident or incident (14 CFR 111.135(c)-(d)).
  • Drug and alcohol testing history: Verified positive drug tests, alcohol misuse violations (including confirmed breath alcohol results of 0.04 or greater), and refusals to test (14 CFR 111.135(e) and 111.220).
  • Employer training, disciplinary, and separation records: Check pilot comments and results from training and proficiency events (14 CFR 111.225), unoverturned final disciplinary actions pertaining to pilot performance (14 CFR 111.230), and final separation records (14 CFR 111.235). Voluntary safety reports protected under Part 193 are prohibited from the PRD under 14 CFR 111.245.
  • National Driver Register (NDR) motor vehicle records: Requires separate written consent under 14 CFR 111.110. Under 14 CFR 111.120(c), the carrier must provide copies of any state driving records obtained within 30 days of your request.
  • Disputing errors: Under 14 CFR 111.320 and 111.250, if you report an inaccuracy in your PRD file, the reporting entity must correct a verified error within 10 days or initiate a dispute investigation within 30 days.

Practice example

Tell me about a time you disagreed with another pilot or instructor in the cockpit, or had to speak up when weather or operational conditions deteriorated. How did you handle it?

Example answer written by our team. The applicant is invented. While flying as Second in Command in a two-pilot Part 135 turboprop operation last winter, we were conducting an instrument approach with a reported ceiling right at minimums. Just after crossing the final approach fix, tower reported that visibility had dropped below the published landing minimum for our approach. The Captain kept descending and said we would probably break out before decision altitude. I immediately cross-checked our company operations specifications and 14 CFR 135.225, and I stated clearly, 'Captain, visibility is below minimums and we do not have the required runway visual range or visual references, let's execute the missed approach.' We climbed out on the published missed approach procedure, entered holding, and coordinated with dispatch to divert to our alternate airport where ceilings were 1,500 feet. On the ground, we debriefed the approach calmly. That flight reinforced for me that speaking up early with standard phraseology and specific facts keeps both pilots on the same page during high-workload phases of flight.

This answer works because it sets a specific operational scene, demonstrates working knowledge of instrument approach rules and crew resource management without blaming the other pilot, and shows a calm, assertive callout followed by a professional debrief.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

What are the flight hour minimums for a Restricted ATP (R-ATP) in a regional pilot interview?

Under 14 CFR 61.160, pilots at least 21 years old may qualify for a Restricted ATP at 750 hours (U.S. military undergraduate pilot training graduates), 1,000 hours (FAA-authorized aviation bachelor's degree with 60 aviation semester credits), 1,250 hours (FAA-authorized aviation associate degree with 30 aviation semester credits), or 1,500 hours (with at least 200 hours of cross-country time). All R-ATP tiers also require 250 hours of airplane PIC time, 100 hours of night time, and 75 hours of instrument time.

Can Part 135 pilots count their flight time toward Part 121 Captain upgrade requirements?

Yes, if the hours meet 14 CFR 121.436(a)(3). To serve as a Part 121 Pilot in Command, you need an unrestricted ATP certificate, an appropriate type rating, and 1,000 hours derived from Part 121 SIC time, Part 91.1053(a)(2)(i) fractional PIC time, Part 135.243(a)(1) PIC time (passenger-carrying turbojet, 10+ passenger seats, or multiengine commuter), or eligible on-demand Part 135.4(a)(2)(ii)(A) PIC time, plus up to 500 hours of multi-crew turbine military PIC time.

What does an airline check in the FAA Pilot Records Database (PRD) before hiring?

Under 14 CFR Part 111 (which replaced PRIA on September 9, 2024), a hiring air carrier must obtain your written consent to evaluate your FAA certificates, practical test failures, enforcement actions, accident or incident records, DOT drug and alcohol history, past employer training and checkride comments, final disciplinary or separation records, and National Driver Register motor vehicle records. You must apply for PRD access at least 7 days before logging in to review your file and grant consent.

What training is required in the ATP-CTP course before taking the ATP written exam?

Under 14 CFR 61.156, applicants for a multiengine ATP knowledge test must complete at least 30 hours of academic classroom instruction (covering high-altitude aerodynamics, meteorology, air carrier operations, and CRM) and at least 10 hours of training in a flight simulation training device. At least 6 of those simulator hours must be in a Level C or higher full flight simulator representing a multiengine turbine airplane with a maximum takeoff weight of 40,000 pounds or more.

Sources