Allegiant Air Pilot Interview & Altitude Cadet Program

Short answer: Under Federal Aviation Administration (FAA) rules in 14 CFR 61.159 and 61.160, Part 121 First Officers need 1,500 total flight hours for an unrestricted Airline Transport Pilot (ATP) certificate, or fewer than 1,500 hours for a Restricted Privileges ATP (R-ATP) from an authorized aviation degree program. Zero-time students and Certificated Flight Instructors (CFIs) can also train through the Allegiant Altitude Pilot Pathway in Broomfield, Colorado, which offers Part 141 instruction and student loan forgiveness. Your interview preparation should focus on high-altitude aerodynamics, Crew Resource Management (CRM), and Part 121 domestic fuel and destination alternate dispatch rules.

ATP and R-ATP Minimums for Part 121 First Officers

Every First Officer (second in command) in 14 CFR Part 121 domestic, flag, or supplemental operations must hold an ATP certificate and an appropriate airplane type rating. You also need an FAA Airman Medical Certificate, which you apply for online via FAA Form 8500-8 in MedXPress. Under 14 CFR 61.159 (Title 14 eCFR, up to date as of November 10, 2026), an unrestricted airplane ATP requires at least 1,500 hours of total pilot time.

Qualifying pilots with fewer than 1,500 hours of flight time may apply for a Restricted Privileges ATP (R-ATP) under 14 CFR 61.160. Under FAA pilot training guidance, an R-ATP lets you serve as co-pilot until you obtain the necessary 1,500 total hours. When an applicant credits night landing, second-in-command, or flight engineer time under 14 CFR 61.159(b) through (d), the certificate carries the limitation "Holder does not meet the pilot in command aeronautical experience requirements of ICAO."

Audit your logbooks against 14 CFR 61.159 and 61.160 before applying. Under 14 CFR 61.159(a), an unrestricted airplane ATP requires 500 hours of cross-country flight time, along with night, instrument, class, and pilot-in-command minimums.

  • Night landing substitution (14 CFR 61.159(b)): After logging at least 20 night full-stop takeoffs and landings, each additional night full-stop takeoff and landing credits 1 hour toward the 100-hour night requirement, up to 25 hours.
  • Simulator instrument credit (14 CFR 61.159(a)(4)): Credit up to 25 hours of simulated instrument time in an airplane full flight simulator (FFS) or flight training device (FTD), or up to 50 hours in an approved Part 142 course.
  • Total simulator cap (14 CFR 61.159(a)(6)): At most 100 hours of total experience under 61.159 or 61.160 may come from an airplane FFS or FTD in an approved Part 121, 135, 141, or 142 course.
  • Flight engineer credit (14 CFR 61.159(d)): Commercial pilots may credit 1 hour per 3 hours of qualifying Part 121 or U.S. Armed Forces flight engineer time, up to 500 hours.

FAA ATP and Restricted ATP aeronautical experience requirements under 14 CFR 61.159 and FAA ATP guidance

Certification Pathway Total Pilot Time Cross-Country Time Sub-Requirements (Night, Instrument, Class, PIC)
Unrestricted ATP (14 CFR 61.159) 1,500 hours 500 hours 100 hrs night, 75 hrs instrument, 50 hrs airplane class (max 25 FFS), 250 hrs PIC (100 XC, 25 night)
R-ATP: Authorized Institution Graduate (14 CFR 61.160) Fewer than 1,500 hours Per 14 CFR 61.160 Graduates of specific aviation degree programs certified under AC 61-139 and FAA Form 8700-1

Allegiant Altitude Pilot Pathway and Part 141 Training

To build a closed-loop cadet pipeline from zero flight hours to the First Officer seat, Allegiant Travel Company partnered with Spartan Education Group to launch the Allegiant Altitude Pilot Pathway. Training runs at McAir Aviation, an FAA Part 141 flight school in Broomfield, Colorado in the Denver area. Both zero-hour student pilots and current CFIs can inquire about enrollment.

Allegiant's Loan Forgiveness Program can forgive up to $50,000 of student pilot training debt after three years of flying for Allegiant and meeting performance standards (ir.allegiantair.com, as of February 2023). Confirm current enrollment windows directly on Allegiant's official career portal.

  • FAA Part 141 ground and flight instruction: Coaching and structured training from zero hours through commercial and instructor ratings.
  • Level D jet simulator sessions: High-fidelity jet simulation paired with custom leadership development coursework.
  • Executive and business model immersion: Direct introductions to Allegiant senior executives and point-to-point airline operations.
  • Digital performance tracking: Instruction supported by Spartan's learning management systems and proprietary digital reporting.

Part 121 Operations, Base Structure, and Chief Pilot Oversight

Allegiant Air operates all-nonstop scheduled flights connecting small-to-medium cities to vacation destinations under 14 CFR Part 119 and Part 121 domestic rules. If your goal is flying out-and-back day schedules that get you home almost every night without multi-day hotel pairings, prepare to explain how you will live near base or manage commuting within 14 CFR Part 121 Subpart Q rest rules. Because point-to-point day turns begin and end at your assigned domicile, living in base removes multi-leg commuter fatigue.

When evaluating narrowbody flight decks such as an Airbus A320 or Boeing 737 MAX at a dual-fleet carrier, review how crew base bidding aligns with aircraft type assignments before ranking domiciles. Under 14 CFR Part 121 Subpart N and Subpart O (121.400, 121.418, and 121.441), operating separate aircraft types requires distinct qualification or differences training and proficiency checks. Confirm active domiciles, fleet assignments, and seniority bidding rules on Allegiant's official careers page and in your recruiting packet.

Check your invitation email to confirm the exact format and order of your screening stages. Prepare for both an online technical assessment and a one-on-one HR and Chief Pilot technical interview. For an online technical screen, practice timed questions from the ATP knowledge areas covering high-altitude aerodynamics, meteorology, and transport performance. For a one-on-one HR and Chief Pilot interview, rehearse first-person stories on crew conflict resolution alongside live walk-throughs of Part 121 fuel and alternate releases. All flightcrew applicants must also comply with 14 CFR Part 120 drug and alcohol testing.

Technical Interview Focus: ATP CTP and High-Altitude Aerodynamics

Before sitting for the multiengine ATP knowledge test, applicants for an ATP certificate with an airplane category multiengine class rating or an ATP certificate issued concurrently with an airplane type rating must complete an Airline Transport Pilot Certification Training Program (ATP CTP) under AC 61-138. Online technical assessments and Chief Pilot interviews draw directly from the ATP CTP and Part 121 training syllabi, which prepare applicants to operate safely in multiengine turbine operations.

In Part 121 service, 14 CFR Part 121 Subpart N governs initial, transition, upgrade, and recurrent ground and flight training (121.419, 121.424, and 121.427), alongside Appendix E flight training requirements and Appendix F proficiency check requirements. Simulator and flight training maneuvers evaluate low-altitude windshear, slow flight, instrument arrivals and departures, stall prevention, and crosswind takeoffs and landings.

Part 121 and ATP training regulatory framework under FAA guidance and 14 CFR Part 121

Training Phase Governing Rule or Guidance Required Regulatory Topics and Scope
ATP Certification Training Program (ATP CTP) AC 61-138 Prepares applicants for multiengine ATP knowledge test and multiengine turbine air carrier operations
R-ATP Institutional Authority AC 61-139 & Form 8700-1 Authorizes institutions of higher education to certify aviation degree graduates for reduced hours
Initial, Transition, and Upgrade Training 14 CFR 121.419 & 121.424 Ground and flight training curriculum, low-altitude windshear, and Appendix E flight maneuvers
Recurrent Training and Proficiency Checks 14 CFR 121.427 & 121.441 Recurrent ground and flight training and Appendix F proficiency check requirements

Technical Interview Focus: Part 121 Dispatch and Alternate Rules

Under 14 CFR 121.533 and 121.663, the pilot in command and certificated aircraft dispatcher share responsibility for operational control and the dispatch release in domestic operations. Carriers retain flight-to-dispatch communication records under 14 CFR 121.711. Be ready to apply Part 121 domestic fuel, destination alternate, and runway stopping rules to sample weather and performance releases.

  • General IFR alternate rule (14 CFR 121.619): Domestic IFR or over-the-top dispatch releases are governed by the destination alternate airport requirements of 14 CFR 121.619.
  • Departure alternate rule (14 CFR 121.617): When weather conditions at the departure airport are below landing minimums in the carrier's Operations Specifications, the dispatch release must specify an alternate airport for departure.
  • Alternate minima (14 CFR 121.625): Listed alternates must meet the alternate airport weather minima requirements of 14 CFR 121.625.
  • Inoperable instruments and icing (14 CFR 121.628 and 121.629): Verify Minimum Equipment List (MEL) compliance for inoperable instruments and equipment and adherence to icing operation rules prior to departure.
  • Domestic fuel and arrival weight rules (14 CFR 121.639, 121.647, and 121.195): Verify domestic fuel supply requirements and fuel computation factors on your dispatch release before pushback. Under 14 CFR 121.195(a), your planned arrival weight after normal fuel and oil consumption to the destination or alternate cannot exceed the Airplane Flight Manual landing limit.

18 Practice Questions for Your Allegiant Pilot Interview

Rehearse these 18 technical and behavioral questions, written by our team from 14 CFR Part 61 and Part 121 standards, out loud using stories from your own flight logbook.

    1. High-altitude aerodynamics (AC 61-138): How do true airspeed, Mach number, low-speed stall margin, and Mach buffet change as a jet climbs at constant weight?
    1. Stall recovery criteria (14 CFR 121.424): If the stick shaker activates at high altitude on autopilot, what is your immediate recovery input to reduce angle of attack?
    1. Upset prevention vs. recovery (14 CFR 121.419): How do prevention and recovery actions differ, and why are aggressive rudder inputs hazardous in wake turbulence?
    1. Unreliable airspeed (14 CFR 121.424): How do you diagnose unreliable airspeed in IMC climb and transition to manual pitch-and-power targets?
    1. Gusty crosswinds and bounced landings (14 CFR Part 121 Appendix E): Describe your crosswind controls through rotation and when you go around from a bounce.
    1. Domestic destination alternate rule (14 CFR 121.619): Walk through how you verify whether a domestic IFR dispatch release requires a destination alternate airport.
    1. Alternate weather minima (14 CFR 121.619 and 121.625): How do you confirm a listed alternate airport meets legal weather minima before signing the dispatch release?
    1. Turbine landing distance (14 CFR 121.195(b)): Explain the 60 percent destination runway rule and the required 50-foot screen height over the runway threshold.
    1. Joint operational control (14 CFR 121.533 and 121.663): How do you handle a legal dispatch release when thunderstorms are forming along your arrival?
    1. MEL and CDL workflow (14 CFR 121.628): Walk through discovering an inoperative cockpit gauge at an outstation prior to boarding.
    1. Pilot monitoring catch (14 CFR 121.409 and 121.542): Tell me about a time as pilot monitoring when you caught an altitude, speed, or clearance deviation early.
    1. Runway verification (14 CFR Part 121 Appendices E and F): What cross-checks confirm you are lined up on the assigned runway before advancing thrust?
    1. Crew conflict and CRM (14 CFR 121.404): Describe a disagreement with a captain or senior instructor over weather, fuel, or checklists and how you resolved it.
    1. Automation workload (14 CFR 121.424): Share an instance where FMS reprogramming raised workload on approach and you stepped down to manual flight.
    1. Training setback (14 CFR 121.415): Tell me about a stage check, checkride, or simulator lesson that went poorly and how you fixed the root deficiency.
    1. Multi-leg turnarounds (14 CFR 121.471): How do you guard against checklist complacency on the final leg of a multi-turn domestic duty day?
    1. R-ATP privileges (FAA ATP guidance): What co-pilot privileges apply to an R-ATP certificate and when do you qualify to remove the restriction?
    1. Career fit with Allegiant: Allegiant has flown nonstop routes from small-to-medium cities to vacation destinations since 1999. Why does this model fit your career?

Pre-Interview Document and Logbook Audit Checklist

Run our team's four-step audit before submitting your airline application or joining your Chief Pilot interview.

Step 1, break out 14 CFR 61.159 hour buckets: Reconcile airplane PIC, cross-country, night, instrument, and simulator credits against your FAA Form 8710-1 history.

Step 2, assemble R-ATP degree records (AC 61-139): Gather official transcripts and your institution's certifying statement issued under FAA Form 8700-1 authority.

Step 3, verify ATP CTP records (AC 61-138): Keep your ATP CTP graduation certificate and passed ATP knowledge test report together.

Step 4, audit medical and training disclosures (14 CFR 121.683): Confirm your MedXPress FAA Form 8500-8 application and medical certificate are current and disclose every prior checkride or training event accurately.

Practice example

You are reviewing a domestic IFR dispatch release with your captain. The release is legally compliant with 14 CFR 121.619 and 121.195, and no destination alternate is listed, but embedded thunderstorms are developing near the arrival gate and runway braking action may deteriorate. How do you handle the release and coordinate with your captain and the dispatcher?

Example answer, written by us. It is not a real applicant's story. Even when a domestic IFR dispatch release meets the destination alternate exemptions of 14 CFR 121.619 and the 60 percent dry runway landing distance limit of 14 CFR 121.195(b), legal dispatch minimums are a floor rather than a target when convective weather is building. Under 14 CFR 121.533 and 121.663, the pilot in command and the aircraft dispatcher share joint responsibility for operational control and the dispatch release. As First Officer, I would pull up the latest radar summary and terminal forecasts, then brief the captain on the arrival corridor threat and contaminated runway stopping margins before we sign the release. I would recommend calling the dispatcher together to add a destination alternate outside the storm path under 14 CFR 121.625 and request contingency holding fuel under 14 CFR 121.639 and 121.647. Framing the recommendation around shared operational control and landing margin numbers keeps the discussion factual, supports the captain's decision authority, and gives us a pre-planned diversion airport before pushback.

This answer cites the exact 14 CFR Part 121 dispatch, landing distance, and fuel rules first, proving technical accuracy to the Chief Pilot. It then demonstrates active Crew Resource Management (CRM) and understanding of joint operational control under 14 CFR 121.533 by proposing a collaborative solution with the captain and dispatcher before departure.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

What rules govern destination alternates and landing distance in Part 121 domestic dispatch?

Under 14 CFR 121.619 and 121.625, domestic IFR dispatch releases must comply with destination alternate airport listing and weather minima rules.

How does the Allegiant Altitude Pilot Pathway loan forgiveness work?

Operated by Allegiant Travel Company and Spartan Education Group at McAir Aviation in Broomfield, Colorado, the Altitude Pilot Pathway provides Part 141 training from zero flight hours to the First Officer seat. Under Allegiant's Loan Forgiveness Program, cadets can qualify for student pilot training debt forgiveness up to the program cap after three years of flying for Allegiant and meeting performance standards.

Who must complete the ATP Certification Training Program (ATP CTP)?

Under FAA ATP training rules and AC 61-138, the ATP CTP applies to applicants for an ATP certificate with an airplane category multiengine class rating or an ATP certificate issued concurrently with an airplane type rating. It prepares pilots to operate safely in air carrier operations that require an ATP certificate by rule.

What total flight hours are required for an R-ATP vs an unrestricted ATP?

Under 14 CFR 61.159, an unrestricted multiengine ATP requires at least 1,500 hours of total pilot time (including 500 cross-country hours, 100 night hours, 75 instrument hours, and 250 airplane PIC hours). Under FAA R-ATP rules and AC 61-139, graduates of authorized aviation degree programs with fewer than 1,500 hours can obtain a restricted privileges ATP certificate to serve as a co-pilot until reaching 1,500 hours.

What management personnel are required for a Part 121 air carrier?

Under 14 CFR 119.65 and 119.67, Part 121 air carriers must maintain qualified management personnel, including a Chief Pilot and Director of Operations, who meet statutory certification and experience requirements.

Sources