Allegiant Pilot Qualifications: FAA Part 121 Rules and Interview Preparation

Short answer: If your goal is to fly as an Allegiant pilot, you must first meet the Federal Aviation Administration baseline for Part 121 air carrier operations. Under 14 CFR 121.436, serving as second in command requires an Airline Transport Pilot certificate and an aircraft type rating, while an unrestricted ATP requires at least 1,500 total flight hours under 14 CFR 61.159. Eligible military and collegiate pilots can qualify for a restricted privileges ATP with as few as 750 to 1,250 hours under 14 CFR 61.160.

FAA baseline to qualify as a Part 121 airline pilot

Every commercial pilot aiming for an airline flight deck, including aspiring Allegiant pilots, must satisfy the federal crewmember qualification rules in 14 CFR Part 121 Subpart O and the certification rules in 14 CFR Part 61 Subpart G, current as of November 9, 2026.

Under 14 CFR 121.436(b), no certificate holder may use a pilot as second in command in Part 121 operations unless that pilot holds an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the aircraft being flown. A second-in-command type rating obtained under 14 CFR 61.55 does not satisfy Part 121 requirements.

Before you can sit for the ATP multiengine knowledge test, 14 CFR 61.153(e) requires you to receive a graduation certificate from an authorized training provider certifying completion of the Airline Transport Pilot Certification Training Program (ATP CTP) specified in 14 CFR 61.156. You must also be able to read, speak, write, and understand the English language, be of good moral character, and hold a Commercial Pilot Certificate with an instrument rating (or qualifying military or foreign equivalents) under 14 CFR 61.153.

  • Second in command (First Officer): Requires an ATP certificate (restricted or unrestricted) and an appropriate aircraft type rating under 14 CFR 121.436(b).
  • Pilot in command (Captain): Requires an unrestricted ATP certificate not subject to 14 CFR 61.167 limitations, an appropriate aircraft type rating, and at least 1,000 hours of qualifying air carrier or military flight time under 14 CFR 121.436(a).
  • Minimum age: 23 years old for an unrestricted ATP under 14 CFR 61.153(a)(1), or 21 years old for a restricted privileges ATP under 14 CFR 61.153(a)(2).

ATP flight hour requirements under 14 CFR 61.159

To apply for an unrestricted ATP certificate with an airplane category and class rating under 14 CFR 61.159(a), you must log at least 1,500 hours of total time as a pilot. Within those 1,500 hours, the FAA sets specific sub-minimums for cross-country, night, class, instrument, and pilot-in-command experience.

By our calculation from 14 CFR 61.159(a), the 500-hour cross-country requirement equals one-third (33.3 percent) of the 1,500-hour total time requirement, and the 250-hour airplane pilot-in-command requirement equals one-sixth (16.7 percent) of the total time.

You can credit certain simulator and night landing experience toward these numbers. Under 14 CFR 61.159(a)(6), up to 100 hours of the total aeronautical experience may be obtained in a full flight simulator or flight training device representing an airplane if completed as part of an approved training course under Parts 121, 135, 141, or 142. Additionally, under 14 CFR 61.159(b), a pilot who has logged at least 20 night takeoffs and landings to a full stop may substitute each additional night takeoff and landing to a full stop for 1 hour of night flight time, up to 25 hours.

Unrestricted ATP Airplane Aeronautical Experience Minimums (14 CFR 61.159)

Experience Category Minimum Hours Required Key Simulator or Credit Rules (14 CFR 61.159)
Total time as a pilot 1,500 hours Up to 100 hours in an approved airplane FFS or FTD course under Part 121, 135, 141, or 142
Cross-country flight time 500 hours Reduced to 200 hours for a restricted privileges ATP under 14 CFR 61.160(e) and (f)
Night flight time 100 hours Up to 25 hours credited via extra full-stop night takeoffs and landings after the first 20
Class of airplane sought 50 hours Up to 25 hours in a full flight simulator in an approved course. No FTD or ATD allowed
Instrument flight time (actual or simulated) 75 hours Up to 25 hours in an FFS or FTD (or up to 50 hours if in a Part 142 course)
Airplane PIC (or supervised SIC performing PIC duties) 250 hours Must include at least 100 hours of cross-country time and 25 hours of night time

Restricted privileges ATP (R-ATP) pathways under 14 CFR 61.160

If you have not yet reached 1,500 hours, 14 CFR 61.160 allows eligible military pilots and graduates of FAA-authorized aviation degree programs to apply for a restricted privileges ATP certificate with an airplane category multiengine class rating. As the FAA explains on its Pilot Training ATP page (updated June 8, 2026), a restricted privileges ATP allows a pilot to serve as a co-pilot (second in command) until obtaining the necessary 1,500 hours.

Every applicant qualifying under the reduced total hours of 14 CFR 61.160(a) through (d) must be at least 21 years old under 14 CFR 61.153(a)(2) and meet all other aeronautical experience minimums of 14 CFR 61.159, except that required cross-country time is reduced from 500 hours to 200 hours under 14 CFR 61.160(e). Under 14 CFR 61.160(f), a pilot who has reached 1,500 hours total time and 200 hours of cross-country time (while meeting the remaining 61.159 minimums) may also apply for a restricted privileges ATP.

An R-ATP carries the limitation 'Restricted in accordance with 14 CFR 61.167' on the certificate. Once you meet the full age and aeronautical experience requirements of 14 CFR 61.153(a)(1) and 61.159, you can present satisfactory evidence to remove the restriction under 14 CFR 61.160(g).

Restricted Privileges ATP Pathways and Reductions (14 CFR 61.160)

Pathway Category Minimum Total Hours Minimum Cross-Country Hours
U.S. military pilot or former military pilot (14 CFR 61.160(a)) 750 hours 200 hours
Bachelor's degree with aviation major and 60 approved aviation credit hours (14 CFR 61.160(b)) 1,000 hours 200 hours
Associate's degree (or Bachelor's) with 30 to 59 approved aviation credit hours (14 CFR 61.160(c)-(d)) 1,250 hours 200 hours
Cross-country time only R-ATP (14 CFR 61.160(f)) 1,500 hours 200 hours

What happens after a Part 121 hire: training, IOE, and consolidation

When you join a Part 121 airline, federal regulations govern every step from classroom indoctrination to your first 100 hours on the line. Under 14 CFR 121.433(a), you must satisfactorily complete initial ground and flight training for the specific airplane type and crewmember position before serving as a required crewmember.

First, under 14 CFR 121.435, any newly hired Part 121 pilot who began basic indoctrination ground training on or after April 27, 2022, must complete operations familiarization before starting operating experience. You must occupy the flight deck observer seat using an operational headset for at least two operating cycles conducted by the certificate holder.

Next comes initial operating experience (IOE) in flight under 14 CFR 121.434(c). A second in command performs duties under the supervision of an appropriately qualified check pilot. For initial training in Group II airplanes (which includes turbojet transport aircraft), 14 CFR 121.434(c)(3)(i) requires at least 25 hours of operating experience and at least 4 operating cycles, with at least 2 cycles as the pilot flying the airplane. For Group II transition training, a second in command needs 15 hours and a pilot in command needs 25 hours, including the same 4 operating cycles.

Finally, under 14 CFR 121.434(g), both pilot in command and second in command crewmembers must acquire at least 100 hours of line operating flight time for consolidation of knowledge and skills (which includes IOE hours) within 120 days after completing the type rating practical test or proficiency check. The airline may extend this window to at most 150 days if the pilot completes refresher training or a supervised line observation flight on or before day 120 under 14 CFR 121.434(h)(4). By our calculation from 14 CFR 121.434(g), completing 100 hours in 120 days requires averaging 25 hours of line operating flight time every 30 days.

First officer operating limitations and upgrading to Captain

During your first 100 hours as second in command in a new airplane type under Part 121, federal pairing and operating rules restrict when you can manipulate the controls during takeoff and landing. Under 14 CFR 121.438(a), unless the pilot in command is a qualified check pilot, the pilot in command must make all takeoffs and landings at special airports and whenever specific weather or runway thresholds are reached.

The restricted weather and runway conditions under 14 CFR 121.438(a) include:

In addition, 14 CFR 121.438(b) states that no person may conduct Part 121 operations unless either the pilot in command or the second in command has at least 75 hours of line operating flight time in that type of airplane.

To upgrade to pilot in command (Captain) under 14 CFR 121.436(a), you must hold an unrestricted ATP certificate, hold the aircraft type rating, and have logged at least 1,000 hours in qualifying operations. Those 1,000 hours can come from serving as second in command in Part 121 operations, serving as pilot in command in eligible Part 91K (§ 91.1053(a)(2)(i)) or Part 135 (§ 135.243(a)(1) or § 135.4(a)(2)(ii)(A)) operations, or any combination thereof. Under 14 CFR 121.436(c), you may also credit up to 500 hours of U.S. military flight time obtained as pilot in command of a multiengine, turbine-powered, fixed-wing or powered-lift aircraft in an operation requiring more than one pilot.

  • Prevailing visibility at or below 3/4 mile in the latest weather report (14 CFR 121.438(a)(2)(i)).
  • Runway visual range (RVR) for the runway to be used at or below 4,000 feet (14 CFR 121.438(a)(2)(ii)).
  • Water, snow, slush, or similar conditions on the runway that may adversely affect airplane performance (14 CFR 121.438(a)(2)(iii)).
  • Braking action on the runway reported to be less than good (14 CFR 121.438(a)(2)(iv)).
  • Crosswind component for the runway in excess of 15 knots (14 CFR 121.438(a)(2)(v)).
  • Windshear reported in the vicinity of the airport, or any other condition in which the PIC exercises the PIC's prerogative (14 CFR 121.438(a)(2)(vi)-(vii)).

Medical certification and recency rules for airline pilots

Airline pilots must maintain both medical clearance and takeoff and landing currency. As detailed on the FAA Medical Certification page (updated October 2, 2026), pilots apply for an FAA Airman Medical Certificate using the online FAA MedXPress system (FAA Form 8500-8, Items 1 through 20) prior to visiting an Aviation Medical Examiner (AME). Under 14 CFR 61.53, all certificated pilots are prohibited from performing flight crewmember duties if they do not meet medical certification requirements, including adverse events from medications. If a pilot receives a Pfizer-BioNTech, Moderna, or Novavax COVID-19 vaccine dose or booster, the FAA Office of Aerospace Medicine requires a 48-hour no-fly and no safety-related duty interval after each dose.

Once flying the line, 14 CFR 121.439(a) requires every pilot flightcrew member to make at least three takeoffs and landings within the preceding 90 days in the airplane type in which the pilot serves (or in an approved Level B or higher full flight simulator). If a pilot goes past 90 consecutive days without those three takeoffs and landings, recency must be re-established under a check pilot's supervision under 14 CFR 121.439(b). That requalification requires at least three takeoffs and landings. Those maneuvers must include one takeoff with a simulated critical engine failure, one ILS landing to authorized minimums, and one landing to a full stop.

Under 14 CFR 121.440 and 121.441, a pilot in command must also pass a line check every 12 calendar months and complete a proficiency check every 12 calendar months (plus a proficiency check or approved simulator course within the preceding 6 calendar months). All other pilots must complete a proficiency check or line-oriented flight training every 24 calendar months, with a proficiency check or simulator course every 12 calendar months.

Pre-application logbook audit and interview preparation checklist

Before your interview, audit your logbooks against Part 61 and Part 121 rules and practice answering behavioral and technical questions. Use this step-by-step plan written by our team to verify your records and practice telling your own stories out loud.

  • Audit your 250-hour airplane PIC block: Verify under 14 CFR 61.159(a)(5) that your 250 hours of airplane PIC (or supervised SIC performing PIC duties) sit cleanly in a separate column from dual received, and confirm that at least 100 of those PIC hours are cross-country and 25 are night.
  • Separate simulator time from flight time: Under 14 CFR 61.159(a)(3) and (a)(4), check that you have credited at most 25 hours of full flight simulator time toward the 50-hour class requirement and at most 25 hours of simulated instrument device time (or 50 hours under Part 142) toward the 75-hour instrument requirement.
  • Verify Part 135 SIC PDP signatures if applicable: If you logged second-in-command time under a Part 135 SIC professional development program toward your total time under 14 CFR 61.159(c), confirm the PIC certified the logbook entry and that none of that time is counted toward your 250-hour PIC requirement.
  • Prepare your FAA MedXPress and training records: Ensure your medical certificate is current via FAA MedXPress and gather your ATP CTP graduation certificate required under 14 CFR 61.153(e) along with your official college transcripts or DD-214 if applying under 14 CFR 61.160.
  • Practice telling your own stories out loud: Build 5 to 6 real flight stories from your logbook covering weather diversions, crew coordination, mechanical abnormal events, and regulatory compliance (such as 14 CFR 121.438 weather limits or 14 CFR 61.53 medical fitness). Practice speaking them without memorizing scripts.

Practice example

You are a newly qualified First Officer with 60 hours of line operating flight time in your aircraft type. Before pushback, ATIS reports a 17-knot crosswind component and wet runway braking action reported as medium. It is your leg to fly. How do you handle the departure brief with the Captain?

Example answer, written by us. It is not a real applicant's story. During our pre-departure briefing, I would speak up right away and transfer the takeoff to the Captain, assuming the Captain is not a qualified check pilot. Under 14 CFR 121.438(a), because I have fewer than 100 hours of second-in-command line operating time in this airplane type under Part 121, the pilot in command is required to make all takeoffs and landings whenever the crosswind component exceeds 15 knots, when braking action is reported as less than good, or when water on the runway may adversely affect performance. Here we have three separate triggers: a 17-knot crosswind, braking action less than good, and a wet surface. I would brief that I will perform the pilot monitoring duties for the taxi and takeoff, and once we are safely established in the climb, we can coordinate handing the controls back if conditions at our destination allow.

This response cites the exact regulatory thresholds in 14 CFR 121.438(a) (100 hours in type, 15-knot crosswind, and braking action less than good) and shows proactive crew resource management by transferring controls during the pre-departure brief rather than waiting until taxi-out.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

How many flight hours do you need for an unrestricted ATP certificate?

Under 14 CFR 61.159(a), you need at least 1,500 hours of total time as a pilot. That total must include at least 500 hours of cross-country time, 100 hours of night flight time, 75 hours of instrument flight time, 50 hours in the class of airplane sought, and 250 hours of airplane pilot-in-command time.

Can a First Officer fly for a Part 121 airline with a Restricted ATP?

Yes. Under 14 CFR 121.436(b) and FAA ATP training guidance, a restricted privileges ATP certificate (with an appropriate aircraft type rating) allows an eligible pilot to serve as second in command (co-pilot) in Part 121 operations until reaching 1,500 hours and age 23.

What are the flight hour requirements to upgrade to Captain at a Part 121 airline?

Under 14 CFR 121.436(a), a pilot in command must hold an unrestricted ATP certificate, an appropriate aircraft type rating, and at least 1,000 hours of qualifying Part 121 SIC, eligible Part 91K PIC, or eligible Part 135 PIC flight time. Up to 500 hours of qualifying multiengine turbine U.S. military PIC time can be credited toward the 1,000-hour requirement.

What is the Part 121 100-hour consolidation rule for new airline pilots?

Under 14 CFR 121.434(g), newly type-rated pilots and upgrading captains must log at least 100 hours of line operating flight time (including initial operating experience) within 120 days of passing their practical test or proficiency check. With refresher training or a check pilot observation flight by day 120, the airline can extend the window to at most 150 days.

When is a new Part 121 First Officer restricted from making a takeoff or landing?

Under 14 CFR 121.438(a), if a second in command has fewer than 100 hours in the airplane type under Part 121 and the captain is not a check pilot, the captain must make all takeoffs and landings at special airports or when visibility is at or below 3/4 mile, RVR is at or below 4,000 feet, crosswinds exceed 15 knots, braking action is less than good, runways are contaminated, or windshear is reported.

Sources