American Airlines Pilot Testing: FAA Certification, Checks, and Vetting

Short answer: To qualify as a pilot for a Part 121 carrier when your goal is American Airlines, you must pass the FAA Airline Transport Pilot (ATP) knowledge and practical tests after completing 40 hours of ATP Certification Training Program (CTP) instruction under 14 CFR 61.156, obtain a verified negative pre-employment drug test under 14 CFR 120.109, and pass a full Pilot Records Database (PRD) evaluation under 14 CFR 111.105. Once in Part 121 training, you must pass an FAA-approved proficiency check under 14 CFR 121.441 and complete 100 hours of line operating flight time for consolidation within 120 days under 14 CFR 121.434.

What tests and checks are required for Part 121 airline pilots

When you prepare for a pilot career with a goal like American Airlines, your testing pipeline is governed by federal aviation regulations for Part 121 air carriers. Every pilot entering Part 121 service must clear four mandatory federal testing and verification gates before flying revenue passengers.

First, you must complete the Airline Transport Pilot Certification Training Program (ATP CTP) and pass both the FAA ATP knowledge exam and practical test under 14 CFR Part 61 Subpart G. Second, the hiring carrier must evaluate your complete certification, training, and employment history in the FAA Pilot Records Database (PRD) and check your National Driver Register (NDR) motor vehicle records under 14 CFR Part 111. Third, you must pass a Department of Transportation (DOT) pre-employment drug test with a verified negative result under 14 CFR Part 120. Fourth, during training with the airline, you must pass a Part 121 flight simulator proficiency check, complete operations familiarization, and finish supervised operating experience under 14 CFR Part 121 Subparts N and O.

Confirm any employer-specific online cognitive assessments, personality questionnaires, or interview stage details directly in your invitation email from the carrier.

  • FAA certification gate: 30 hours of classroom instruction and 10 hours of simulator training in the ATP CTP (14 CFR 61.156), followed by the ATP knowledge test and practical test (14 CFR 61.153).
  • Background and record evaluation gate: Written pilot consent and full carrier review of FAA records, prior employer training and disciplinary records, and state driving records via the PRD (14 CFR 111.105 and 111.110).
  • Medical and toxicology gate: Pre-employment drug screen yielding a verified negative result prior to hiring into any safety-sensitive role, plus strict adherence to the 0.04 alcohol concentration limit (14 CFR 120.109 and 120.37).
  • Air carrier training and checking gate: Ground and flight training, extended envelope training in a Level C or higher simulator, a proficiency check, and line operating consolidation (14 CFR 121.401, 121.434, and 121.441).

FAA ATP knowledge and practical test requirements

Under 14 CFR 121.436, no pilot may act as second in command (SIC) or pilot in command (PIC) in Part 121 operations without holding an ATP certificate and an appropriate aircraft type rating for the aircraft being flown. An SIC type rating obtained under 14 CFR 61.55 does not satisfy Part 121 qualification requirements.

Before you can apply for the multiengine airplane ATP knowledge test, 14 CFR 61.153(e) requires you to present a graduation certificate from an authorized training provider certifying completion of the ATP CTP specified in 14 CFR 61.156. The FAA contracted the Airman Certificate Testing Service (ACTS) to manage the development, maintenance, and delivery of airman knowledge tests, and applicants must register for an FAA Tracking Number (FTN), a requirement effective since January 13, 2020.

By our calculation from 14 CFR 61.156, the ATP CTP requires at least 40 total programmed hours of instruction, split 75 percent into academic classroom instruction (30 hours) and 25 percent into flight simulation training device (FSTD) instruction (10 hours). Within the 30 academic hours, air carrier operations accounts for 46.7 percent of the classroom curriculum (14 hours).

Mandatory ATP CTP Minimum Training Hours (14 CFR 61.156)

Training Category Subject Area or Simulator Level Minimum Hours Key Regulatory Topics Covered
Academic Classroom Aerodynamics 8 hours High altitude operations and flight characteristics
Academic Classroom Meteorology 2 hours Adverse weather phenomena and weather detection systems
Academic Classroom Air Carrier Operations 14 hours Physiology, communications, checklist philosophy, operational control, MEL/CDL, ground operations, turbine engines, transport performance, automation
Academic Classroom Leadership and CRM 6 hours Leadership, professional development, crew resource management, safety culture
FSTD Training Level C or higher Full Flight Simulator (FFS) 6 hours Multiengine turbine airplane (40,000 pounds or more max takeoff weight): low energy states/stalls, upset recovery, icing, thunderstorms, gusty crosswinds
FSTD Training Level 4 or higher FSTD 4 hours Remaining FSTD hours covering navigation, flight management systems (FMS), and automation/autoflight

Unrestricted vs. restricted ATP flight hour minimums

To take the ATP practical test for an unrestricted multiengine airplane certificate under 14 CFR 61.153 and 61.159, you must be at least 23 years old and log at least 1,500 hours of total time as a pilot. If you qualify for a restricted privileges ATP (R-ATP) certificate under 14 CFR 61.160, you must be at least 21 years old and may serve as a Part 121 co-pilot (SIC) until you meet the age and 1,500-hour requirements to remove the restriction under 14 CFR 61.167.

Under 14 CFR 61.160(e), pilots applying under the reduced total flight times for military or qualifying collegiate aviation degrees only need 200 hours of cross-country time instead of the 500 hours required for an unrestricted ATP. By our calculation from 14 CFR 61.159 and 61.160, a U.S. military pilot qualifying at 750 hours completes 50 percent of the standard 1,500-hour total time requirement and 40 percent of the standard 500-hour cross-country requirement.

FAA ATP Aeronautical Experience Requirements (14 CFR 61.153, 61.159, and 61.160)

Qualification Pathway Minimum Age Total Pilot Time Cross-Country Time Other Specific Requirements
Unrestricted ATP (14 CFR 61.159) 23 years 1,500 hours 500 hours 100 hours night, 75 hours instrument, 50 hours in class, 250 hours PIC (with 100 cross-country and 25 night)
R-ATP: Cross-Country Reduced Only (14 CFR 61.160(f)) 21 years 1,500 hours 200 hours Meets all other aeronautical experience requirements of 14 CFR 61.159
R-ATP: Associate Degree or 30-59 Credits (14 CFR 61.160(c)-(d)) 21 years 1,250 hours 200 hours At least 30 semester credit hours of FAA-recognized aviation coursework and Part 141 commercial/instrument training
R-ATP: Bachelor's Degree (14 CFR 61.160(b)) 21 years 1,000 hours 200 hours 60 semester credit hours of FAA-recognized aviation coursework and Part 141 commercial/instrument training
R-ATP: U.S. Military Pilot (14 CFR 61.160(a)) 21 years 750 hours 200 hours DD-214 showing honorable discharge or active service record, plus graduation from Armed Forces undergraduate pilot training

Part 121 simulator evaluations, proficiency checks, and LOFT

Every Part 121 air carrier must obtain initial and final FAA approval for its training and checking curriculum under 14 CFR 121.401. Under 14 CFR 61.157(f), successfully completing a Part 121 proficiency check under 14 CFR 121.441 conducted by an FAA Aviation Safety Inspector, an authorized Aircrew Program Designee (APD), or an authorized Training Center Evaluator (TCE) satisfies the flight proficiency requirements for issuing an ATP certificate and aircraft type rating.

Flight simulation training devices must be specifically approved for the carrier, aircraft type, and maneuvers under 14 CFR 121.407. Extended envelope flight training under 14 CFR 121.423 and low-altitude windshear training under 14 CFR 121.409(d) must be conducted in an approved Full Flight Simulator (FFS), with extended envelope training requiring a Level C or higher FFS.

Under 14 CFR 121.409(b), an approved FFS training course used under 14 CFR 121.441 must provide at least 4 hours of training at the controls, proper pre- and post-flight briefings, and either Appendix F maneuvers or Line-Oriented Flight Training (LOFT). A LOFT session must use a complete flight crew, represent at least two flight segments, include abnormal and emergency procedures, include stall prevention training, and evaluate workload management, pilot monitoring, and PIC leadership.

If you fail a required maneuver during a 14 CFR 121.441 proficiency check, the check pilot may provide additional training during the check and require you to repeat the failed maneuver plus any others needed to verify proficiency. You cannot serve in Part 121 operations until you satisfactorily complete the proficiency check.

  • PIC checking interval (14 CFR 121.441(a)(1)): Proficiency check every 12 calendar months, plus either a proficiency check or approved FFS training course within the preceding 6 calendar months.
  • SIC checking interval (14 CFR 121.441(a)(2)): Proficiency check or LOFT course within the preceding 24 calendar months, plus either a proficiency check or approved FFS course within the preceding 12 calendar months.
  • PIC line check (14 CFR 121.440): Required every 12 calendar months over a typical route, administered by a qualified check pilot.
  • 90-day landing recency (14 CFR 121.439): At least 3 takeoffs and landings in the type or Level B or higher FFS within 90 days. Re-establishing lapsed recency requires a simulated powerplant failure, an ILS to lowest minimums, and a full-stop landing.

Operations familiarization, operating experience, and line consolidation

Passing your simulator check is followed by operational requirements. Under 14 CFR 121.435, all newly hired Part 121 pilots who began basic indoctrination ground training on or after April 27, 2022, must complete operations familiarization before starting supervised operating experience. This requires occupying the observer seat with an operational headset for at least two operating cycles.

Next, under 14 CFR 121.434, you must complete supervised operating experience (OE) inflight with a check pilot. If you completed your preflight visual inspection via pictorial means during your proficiency check, you must demonstrate a complete interior and exterior preflight inspection on a static airplane before finishing OE. For Group II (turbojet) airplanes, initial training requires 25 hours of OE, while transition training requires 25 hours for PICs and 15 hours for SICs, including at least 4 operating cycles with at least 2 as the pilot flying.

After passing your practical test or proficiency check, 14 CFR 121.434(g) requires you to acquire at least 100 hours of line operating flight time for consolidation within 120 days. The carrier may extend this window to at most 150 days if you complete refresher training or pass a supervised line observation flight on or before the 120th day.

While building your first 100 hours as SIC under 14 CFR 121.438, if the PIC is not a check pilot, the PIC must make all takeoffs and landings at special airports and whenever specific weather or runway thresholds are met.

  • Prevailing visibility is at or below 3/4 mile (14 CFR 121.438(a)(2)(i)).
  • Runway visual range (RVR) is at or below 4,000 feet (14 CFR 121.438(a)(2)(ii)).
  • Runway has water, snow, slush, or braking action is reported less than good (14 CFR 121.438(a)(2)(iii)-(iv)).
  • Crosswind component exceeds 15 knots, or windshear is reported near the airport (14 CFR 121.438(a)(2)(v)-(vi)).
  • Crew pairing minimum (14 CFR 121.438(b)): Either the PIC or SIC must have at least 75 hours of line operating flight time in the aircraft type.

Mandatory DOT drug and alcohol testing rules (14 CFR Part 120)

Under 14 CFR 120.105, flight crewmembers and individuals in a training status perform safety-sensitive functions and are subject to DOT drug and alcohol testing under 49 CFR Part 40 and 14 CFR Part 120. Under 14 CFR 120.109(a), an air carrier cannot hire any individual for a safety-sensitive role without receiving a verified negative pre-employment drug test result from an HHS-certified laboratory.

If more than 180 days elapse between your pre-employment drug test and the date you are hired into the carrier's drug testing program, 14 CFR 120.109(a)(3) requires a new pre-employment test with a verified negative result.

Under 14 CFR 120.37, flight crewmembers cannot report for duty or remain on duty with an alcohol concentration of 0.04 or greater, use alcohol on duty, or perform flight crew duties within 8 hours after consuming alcohol. Following an aircraft accident, a crewmember with actual knowledge of the accident who performed safety-sensitive duties at or near the time cannot use alcohol for 8 hours unless post-accident testing is completed or their performance could not have contributed.

Refusing a test carries severe certificate sanctions. Under 14 CFR 120.11, a refusal is grounds for denying any Part 61 certificate or rating application for up to 1 year and suspending or revoking existing certificates. Employers and Medical Review Officers must report test refusals and verified positive tests for medical certificate holders to the FAA within 2 working days. Two verified positive drug tests after September 19, 1994, permanently bar an individual from safety-sensitive duties.

  • Random drug testing (14 CFR 120.109(b)): Minimum annual rate is 50 percent of covered employees, lowering to 25 percent if industry-wide positive rates remain below 1.0 percent for two consecutive years.
  • Post-accident drug testing (14 CFR 120.109(c)): Must be administered as soon as possible, but no later than 32 hours after an accident, if pilot performance contributed or cannot be discounted.
  • Reasonable cause testing (14 CFR 120.109(d)): For Part 121 carriers, requires concurrence from at least two supervisors based on specific physical, behavioral, or performance indicators.
  • Return-to-duty and follow-up testing (14 CFR 120.109(e)-(f)): Requires SAP compliance, a new airman medical certificate dated after the violation, a verified negative test, and at least 6 unannounced follow-up tests in the first 12 months (continuing up to 60 months).

Pilot Records Database (PRD) and NDR background vetting

Since September 9, 2024, the Pilot Records Improvement Act (PRIA) has ceased to be effective, and all Part 121 air carriers evaluate pilot applicants through the FAA Pilot Records Database (PRD) under 14 CFR Part 111. Under 14 CFR 111.105, no reviewing carrier may permit you to begin service as a pilot until it has evaluated all relevant information in the PRD.

Pilots holding a Commercial, ATP, or Remote pilot certificate with a valid FAA medical register at the FAA PRD portal and grant written consent before an airline can view records. Applying for portal access must occur at least 7 days before access is needed under 14 CFR 111.305. Starting in mid-November 2026, the FAA automatically disables PRD user accounts after 365 days of inactivity. Employers must also request prior drug and alcohol records from previous employers under 49 CFR 40.25.

Under 14 CFR 111.225, flight time, duty time, rest time, physical examination medical records, recent flight experience, and protected Voluntary Safety Reporting Program submissions are prohibited from the PRD. Check pilot comments and specific unsatisfactory maneuvers from checking events are mandatory.

Pilot Records Database (PRD) Evaluation Rules (14 CFR Part 111)

PRD Record Category Specific Records Reviewed (14 CFR 111.105, 111.135, 111.220-235) Retention and Reporting Deadlines
FAA Certification & Enforcement Records Certificates, ratings, limitations, medical class, failed Part 61 practical tests, enforcement findings, accidents, and drug/alcohol violations Maintained in PRD for the life of the pilot (14 CFR 111.40)
Employer Training & Checking Records Training, checking, and proficiency events (14 CFR 121.683), results, check pilot comments, and unsatisfactory maneuvers Reported within 30 days of creation. Historical PRIA records back to August 1, 2005, required in PRD (14 CFR 111.215 and 111.255)
Disciplinary & Separation Records Final written warnings, suspensions, removals from flight duties, or terminations related to pilot performance Reported within 30 days of becoming final. Overturned actions must be corrected in PRD within 10 days (14 CFR 111.230 and 111.235)
National Driver Register (NDR) Search State motor vehicle driving records identified through NDR search with written pilot consent Documented in PRD within 45 days of PRD date of hire. Pilot copies provided within 30 days of request (14 CFR 111.110 and 111.240)

Pre-interview checklist for your Part 121 pilot application

Our team built this preparation checklist from 14 CFR Parts 61, 111, 120, and 121 so you can verify your regulatory file before meeting an airline interview panel or starting new-hire training.

Auditing your records prevents delays during the background check and helps you talk through your training background clearly during an interview.

  • At least 30 days before applying: Log into the FAA PRD portal using your MyAccess credentials (logging in at least once every 365 days), enter your pilot certificate number rather than CFI number, and review your practical test and employer records.
  • If you spot an error: Report the inaccuracy in the PRD under 14 CFR 111.320. The reporting employer must correct an agreed error within 10 days or begin an investigation within 30 days under 14 CFR 111.250.
  • Update employment history: Under 14 CFR 111.310(b), list all employers where you worked as a pilot over the preceding 5 years under the PRD Experience tab and affirm that the list is complete.
  • Grant written consent: Select the reviewing carrier name in the PRD Consent menu, choose the release window in days, and sign NDR and 49 CFR 40.25 release forms (or submit FAA Form 8060-14 if you cannot access the portal).
  • Verify ATP and logbook totals: Confirm your ATP CTP graduation certificate and check PIC, cross-country, night, and instrument simulator credits against 14 CFR 61.159 or 61.160 limits.
  • Prepare for technical and behavioral questions: Review every unsatisfactory checkride or training event listed in your PRD so you can explain what happened and what changed in your habits.

How to prepare for technical and behavioral interview questions

Every Part 121 carrier evaluates your PRD file under 14 CFR 111.105 and assesses technical understanding based on the aeronautical knowledge areas of 14 CFR 61.155(c). ATP aeronautical knowledge covers Federal Aviation Regulations, weather charts, icing, windshear avoidance, instrument navigation, ATC procedures, weight and balance, aerodynamics, human factors, and crew resource management (CRM).

Avoid memorized scripts when practicing out loud. Tell your own stories from flight instructing or line flying that illustrate checklist discipline, operational control, MEL usage, and crew coordination. If your PRD shows a failed practical test or an unsatisfactory maneuver during a simulator check, state the date, airplane type, and maneuver clearly, take ownership of the error, and explain the specific procedure you implemented to prevent it from recurring.

Practice example

While reviewing your Pilot Records Database file for your American Airlines interview, the panel notes an unsatisfactory maneuver requiring additional training during a prior Part 121 recurrent simulator proficiency check. Walk us through what happened and what you learned.

Example answer written by our team. The applicant is invented. During my recurrent proficiency check under 14 CFR 121.441 in November 2024, I received an unsatisfactory grade on my first attempt at a single-engine ILS approach to a manual landing. After the simulated failure of the critical engine, I let my scan slow down while re-trimming the rudder and drifted half a dot high on the glideslope inside the final approach fix. Instead of calling for a missed approach immediately when the descent rate exceeded our stabilized approach criteria, I tried to salvage the profile. The check pilot gave me additional training right there in the simulator under 121.441(e) on pitch-power coupling and workload delegation during single-engine configuration changes. I then repeated the maneuver to standards and passed the check. That day taught me that trying to fix an unstabilized approach near the ground is worse than executing an early go-around. Since then, I brief exact rudder-trim and pitch callouts before every engine-out profile and treat any deviation at the final approach fix as an immediate trigger to go around.

This answer states the exact regulatory event recorded in the PRD under 14 CFR 111.225, takes full ownership of the error without making excuses, and explains the specific corrective training completed under 14 CFR 121.441(e).

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

What drug and alcohol screening tests are mandatory before hiring an airline pilot?

Under 14 CFR 120.109(a), an air carrier must conduct a pre-employment DOT drug test and receive a verified negative result before hiring any pilot into a safety-sensitive role, and must re-test if more than 180 days elapse before entering the FAA drug program. Under 14 CFR 120.37, pilots cannot report for duty with an alcohol concentration of 0.04 or greater or perform flight duties within 8 hours of consuming alcohol.

What background records must an air carrier evaluate before clearing a pilot for service?

Under 14 CFR 111.105 and 111.135, the carrier must evaluate your FAA Pilot Records Database (PRD) file, including certificates, ratings, failed practical tests, enforcement actions, accidents, drug and alcohol violations, and prior employer training, proficiency, disciplinary, and separation records. Under 14 CFR 111.110, the carrier must also obtain written consent and review state driving records through the National Driver Register (NDR).

What training is required before taking the FAA multiengine ATP knowledge test?

Under 14 CFR 61.153(e) and 61.156, you must graduate from an approved Airline Transport Pilot Certification Training Program (ATP CTP). The course requires at least 30 hours of classroom instruction and at least 10 hours in flight simulation training devices, including at least 6 hours in a Level C or higher full flight simulator representing a multiengine turbine airplane rated at 40,000 pounds or more.

Does a Part 121 simulator proficiency check count as the FAA ATP practical test?

Yes. Under 14 CFR 61.157(f), successfully completing a proficiency check under 14 CFR 121.441 conducted by an FAA Aviation Safety Inspector, an authorized Aircrew Program Designee (APD), or an authorized Training Center Evaluator (TCE) satisfies the flight proficiency requirements for issuing an ATP certificate and aircraft type rating.

How many flight hours do I need after passing my Part 121 proficiency check?

Under 14 CFR 121.434, you must complete 25 hours of supervised operating experience (15 hours for Group II SIC transition training) including at least 4 operating cycles, and acquire at least 100 hours of line operating flight time for consolidation within 120 days of your check. Additionally, newly hired pilots must complete at least 2 operating cycles of flight deck operations familiarization from the observer seat under 14 CFR 121.435.

Sources