Ameriflight & Part 135 Single-Pilot Cargo Interview Prep

Short answer: Ameriflight is the largest Part 135 cargo airline in the United States, operating over 150 aircraft for UPS, FedEx, and DHL across 11 U.S. bases with pilots averaging 60 flight hours per month, according to Ameriflight's official pilot career pages. Ideal Captain flight time minimums range from 1,800 hours total time on the Beech 1900 to 2,500 hours on the SA227 Metroliner and 3,000 hours on the EMB120 Brasilia, while cadets entering through the Epic Flight Academy pathway transfer at 1,200 hours. Technical interviews for Part 135 cargo operations focus on destination weather reporting under 14 CFR 135.225, Second in Command Professional Development Program (SIC PDP) rules under FAA Advisory Circular 135-43, and Operations Specifications.

Ameriflight Pilot Job Requirements and Fleet Upgrade Math

Ameriflight flies priority cargo for the UPS, FedEx, and DHL supply chains, operating over 150 aircraft and more than 1,500 weekly departures across 11 U.S. bases: BUR, DFW, ELP, GEG, LAN, MHT, OMA, ONT, PDX, PHX, and SAT. Routes typically run five days a week, departing in the morning and returning in the evening, with pilots averaging 60 flight hours per month (720 flight hours per year).

Ameriflight publishes specific flight hour minimums for ideal Captain candidates across its Beech 1900 (BE1900), SA227 Metroliner, and EMB120 fleets, alongside a 1,200-hour cadet Captain pathway created in partnership with Epic Flight Academy in January 2018. If you enter at 1,200 hours total time through the Epic Flight Academy pathway (which includes 10 months of primary student training and 15 months as a Certified Flight Instructor), a three-year Captain commitment at 720 hours per year adds 2,160 flight hours. By our calculation from Ameriflight's figures, a pilot on that track finishes year three with 3,360 hours total time, surpassing the 3,000-hour threshold for the EMB120.

For a direct-entry BE1900 Captain hired at the 1,800-hour total time and 100-hour turbine minimums, reaching the SA227 Metroliner's ideal minimums (2,500 hours total time and 500 hours turbine) requires 700 additional total hours and 400 additional turbine hours. By our calculation at 60 flight hours per month, logging the 400 turbine hours takes 6.7 months, while logging the 700 total hours takes 11.7 months.

  • Certificates and ratings: Commercial Pilot License with multi-engine land and instrument rating (or Airline Transport Pilot License for BE1900 and SA227), plus high-performance and complex logbook endorsements.
  • Currency and medical: Current Instrument Proficiency Check (IPC) and an FAA First or Second Class Medical Certificate (First Class required for EMB120 international operations).
  • Documents and authorizations: English proficiency, FCC Radiotelephone Operator Permit, current passport, valid driver's license, and U.S. work eligibility (EMB120 requires unrestricted international travel without visa sponsorship).

Ameriflight Ideal Captain Flight Hour Requirements by Fleet (Source: Ameriflight Pilot Career Pages), w3.ameriflight.com

Requirement BE1900 Captain SA227 Metroliner Captain EMB120 Captain
Total Time (TT) 1,800 hours 2,500 hours 3,000 hours
Pilot in Command (PIC) 1,000 hours 1,000 hours 1,000 hours
Multi-Engine (ME) 250 hours 250 hours 500 hours
Cross-Country (defined point to point) 500 hours 500 hours 500 hours
Night 100 hours 100 hours 200 hours
Instrument 100 hours 200 hours 200 hours (50 in aircraft)
Turbine 100 hours 500 hours 200 hours
Prior Carrier Experience Part 121 or 135 Part 121 or 135 Part 121 or 135

Gateway Pathways and Onboarding

Ameriflight pilots can bid for a specific base, equipment type, and route. For pilots aiming at major carriers, Ameriflight maintains a Gateway Program with UPS Airlines alongside flow-through programs with Allegiant Air, Frontier Airlines, and Omni Air International.

  • Training preparation: Confirm your initial training schedule, travel, lodging, and aircraft qualification arrangements directly with your recruiter before indoctrination begins.

Core Part 135 Interview Rules: Weather Minimums and OpSpecs

Part 135 interviews test how you apply federal regulations when operating into fields with changing weather or missing automated reports. Two FAA documents anchor these technical questions: the FAA Office of the Chief Counsel's Legal Interpretation on 14 CFR 135.225 (Urban Interpretation) and FAA Advisory Circular (AC) 135-43 (dated 6/28/18) on the Part 135 Second in Command Professional Development Program.

Under 14 CFR 135.225(a), a Part 135 pilot cannot initiate an instrument approach unless the destination airport has an appropriate weather reporting facility and the latest weather report issued by that facility indicates weather conditions are at or above the authorized IFR landing minimums for that airport. In the Urban Legal Interpretation, the FAA clarified that if a destination airport's AWOS 3 reports visibility as missing when you arrive in range, you cannot determine whether conditions are at or above landing minimums. You cannot legally commence the approach under 14 CFR 135.225(a).

However, 14 CFR 135.225(b) provides an alternative for eligible on-demand operations. An airport with a nonfunctioning weather source is functionally equivalent to an airport without a weather reporting facility. A pilot in an eligible on-demand operation may treat the airport as lacking a weather reporting facility and initiate the approach under 135.225(b) if two conditions are met. First, an alternate airport with an approved weather reporting facility must be designated. Second, the pilot must have a current local altimeter setting for the destination airport, or use the current altimeter setting provided by the facility designated on the approach chart.

Interviewers also test Operations Specifications (OpSpecs) and the Part 135 Second in Command Professional Development Program (SIC PDP), authorized via OpSpec A062 under 14 CFR 135.99(c) (effective November 26, 2018). An SIC PDP allows an assigned SIC employed by a Part 135 operator to log SIC flight time in a multiengine airplane or single-engine turbine-powered airplane during operations that do not otherwise require a second pilot.

  • Lower than standard takeoff minima (OpSpec C079): The airplane must be operated by a flightcrew of at least two pilots. Using an autopilot in place of a required SIC is prohibited, and the SIC serves as a required flightcrew member under 14 CFR 135.109 rather than under an SIC PDP.
  • Excluded operators (14 CFR 135.99(d)): Basic operators and single-pilot operators authorized under OpSpecs A037, A038, A039, or A040 are prohibited from holding an SIC PDP.
  • Aircraft equipment (14 CFR 135.99(c)(2)): Requires independent dual controls (no throwover control wheel), independent flight instruments for the second pilot (airspeed, sensitive altimeter, artificial horizon, turn-and-slip indicator, directional gyro, and for IFR, a VSI and course guidance), oxygen supply (per 135.89 and 135.157), and a microphone, transmit switch, and headphone or speaker. A cockpit voice recorder (CVR) is not required under 135.151.
  • Logging flight time (14 CFR 61.51 & 61.159(c)): An assigned SIC under 135.99(c) may log SIC time toward ATP minimums under 61.159(a) (except 61.159(a)(5)), R-ATP minimums under 61.160, and Part 135 PIC requirements under 135.243(b)(2) or (c)(2). An assigned SIC may never log PIC flight time during an SIC PDP operation, even as sole manipulator of the controls, and the PIC must sign and certify each flight in the SIC's logbook.
  • Duty and rest trap (14 CFR 135.263(d)): Both pilots must comply with Part 135 Subpart F flight time, duty, and rest rules. Removing an assigned SIC from a two-pilot SIC PDP sequence for any reason is not a circumstance beyond the control of the operator, so the PIC must immediately meet single-pilot flight time, duty, and rest limits to operate the flight.

20 Ameriflight & Part 135 IFR Technical Interview Questions

Use these 20 technical and operational questions to prepare for a Part 135 cargo panel interview. Every question and answer is grounded in FAA regulations, AC 135-43, the FAA Chief Counsel's 135.225 interpretation, and Ameriflight's operational standards.

    1. Under 14 CFR 135.225(a), what two conditions must be met before you can initiate an instrument approach? Answer: The destination airport must have an appropriate weather reporting facility, and the latest report from that facility must show weather at or above authorized IFR landing minimums.
    1. You are flying a Part 135 IFR flight and the destination AWOS 3 reports visibility as missing when you arrive in range. Can you begin the approach under 14 CFR 135.225(a)? Answer: No. Without reported visibility, you cannot verify that conditions meet landing minimums under 14 CFR 135.225(a).
    1. Under OpSpec C079 (IFR Lower than Standard Takeoff Minima), can a single-pilot Captain use an approved autopilot in place of a Second in Command? Answer: No. OpSpec C079 requires a flightcrew of at least two pilots and prohibits using an autopilot in lieu of a required SIC.
    1. When a flight is conducted under OpSpec C079, is the First Officer flying under an SIC Professional Development Program (SIC PDP)? Answer: No. Under OpSpec C079, the SIC is a required flightcrew member under 14 CFR 135.109.
    1. What Operations Specification authorizes a Part 135 carrier to conduct a Second in Command Professional Development Program under 14 CFR 135.99(c)? Answer: OpSpec A062 authorizes an SIC PDP.
    1. Which Part 135 operators are prohibited from receiving authorization for an SIC PDP under 14 CFR 135.99(d)? Answer: Basic operators and single-pilot or single-PIC operators holding OpSpec A037, A038, A039, or A040.
    1. What standard operating procedures (SOPs) must an operator's manual contain under 14 CFR 135.21 and 135.23 for airplanes used in two-pilot operations? Answer: The manual must include normal, non-normal, abnormal, and emergency procedures (135.327(b)(3)), checklists (135.83), weight and balance and load manifest procedures (135.23(b)), passenger briefing procedures (135.117), and emergency crew functions (135.123).
    1. What flight instruments are required on the second pilot's panel under 14 CFR 135.99(c)(2) for IFR operations? Answer: An airspeed indicator, sensitive altimeter adjustable for barometric pressure, artificial horizon, rate-of-turn indicator with integral slip-skid indicator, directional gyro, vertical speed indicator (VSI), and course guidance for en route navigation and instrument approaches.
    1. When is a Cockpit Voice Recorder (CVR) required on a multiengine turbine aircraft under 14 CFR 135.151? Answer: A CVR is required on a multiengine turbine airplane or rotorcraft only when it has a passenger seating configuration of six or more and two pilots are required by certification or operating rules.
    1. Can an assigned SIC flying under a Part 135.99(c) SIC PDP log Pilot in Command (PIC) time during the legs where the SIC is the sole manipulator of the controls? Answer: No. Under 14 CFR 61.51(e)(1)(i) and 61.159(c)(4), an assigned SIC in a 135.99(c) operation is prohibited from logging PIC time.
    1. Which Part 135 aeronautical experience requirements can be satisfied using SIC flight time logged under 14 CFR 61.159(c)? Answer: It can be used toward eligible on-demand experience under 135.4(a)(2)(i), (a)(3), and (a)(4), Part 135 PIC qualification under 135.243(b)(2) or (c)(2), and recent experience under 135.247(a)(3)(i) and (ii).
    1. What airman and medical certificates are required to serve as an assigned SIC under Part 135? Answer: Under 14 CFR 135.245 and 61.23(a)(2), the pilot must hold at least a Commercial Pilot Certificate with the appropriate airplane category and class rating, an instrument rating, and at least a second-class medical certificate.
    1. How often must a Part 135 pilot complete a 14 CFR 135.293 written or oral test and competency check, and what is the Subpart H training interval? Answer: Both the 135.293 competency check and initial or recurrent Subpart H training under 135.343 must be completed within the preceding 12 calendar-months, with a one-calendar-month grace window before or after the due month.
    1. Does the Part 135 Subpart K 24-calendar-month hazardous materials (hazmat) training requirement depend on whether the carrier is a will-carry or will-not-carry operator? Answer: No. Under 14 CFR 135.505(a), hazmat training is required within the preceding 24 calendar-months whenever a crewmember has duties to perform any job function specified in 135.501(a), regardless of whether the operator is a will-carry or will-not-carry carrier.
    1. If a Part 135 flight will enter RVSM airspace with an assigned SIC, what OpSpec governs the crew's training? Answer: OpSpec B046 (Operations in Reduced Vertical Separation Minimum Airspace) requires that all flightcrew members complete approved training on RVSM operating practices and procedures prior to the flight.
    1. What are the experience and training requirements for a Part 135 Captain to serve as PIC with an assigned SIC under an SIC PDP? Answer: The PIC must have been fully qualified as a PIC for that operator for at least the preceding 6 calendar-months, complete PIC mentoring training under 135.99(c)(4)(ii) every 36 calendar-months, and complete two-pilot CRM training under 135.330.
    1. You are assigned a two-pilot flight sequence under an SIC PDP, and your First Officer calls out sick mid-sequence. Can you use the 14 CFR 135.263(d) exception to exceed single-pilot duty or flight time limits? Answer: No. Removing an assigned SIC from an SIC PDP sequence is not a circumstance beyond the control of the operator under 135.263(d), so you must meet all one-pilot flight time, duty, and rest limits under Subpart F.
    1. What drug, alcohol, and assistance training rules apply to an assigned Part 135 SIC under 14 CFR Part 120? Answer: Because an assigned SIC performs a safety-sensitive function, the pilot is subject to Part 120 drug and alcohol testing and must complete Employee Assistance Program (EAP) training under 14 CFR 120.115.
    1. How do the turbine and multi-engine flight hour minimums compare across Ameriflight's BE1900, SA227, and EMB120 Captain positions? Answer: Multi-engine minimums are 250 hours for the BE1900 and SA227 and 500 hours for the EMB120, while turbine minimums are 100 hours for the BE1900, 200 hours for the EMB120, and 500 hours for the SA227.
    1. What specific instrument flight time rule applies to EMB120 Captain applicants at Ameriflight, and when is a First Class Medical required? Answer: Of the 200 required instrument hours for the EMB120 Captain role, at least 50 hours must be logged in an aircraft, and an FAA First Class Medical Certificate is required for international operations.

Practice question: SIC removal and single-pilot duty limits under 14 CFR 135.263(d)

Before your interview date, verify your logbooks, certificates, and regulatory references using this step-by-step preparation checklist written by our team, then review the model answer below.

**Practice this on Fourstripe. A panel captain asks TMAAT, about-you, technical and scenario questions out loud, follows up on what you said, and scores every answer. Start a practice interview.

  • Audit point-to-point cross-country hours: Break out your 500 hours of defined point-to-point cross-country time in your logbook.
  • Verify aircraft instrument hours: For the EMB120 Captain role (200 instrument hours required), confirm that at least 50 of those hours were logged in an actual aircraft.
  • Confirm IPC, endorsements, and documents: Check that your logbook shows a current IPC, high-performance and complex endorsements, and bring your passport, driver's license, FCC permit, and Medical Certificate.
  • Review 14 CFR 135.225(a) vs. 135.225(b) and Subpart F, G, H, and K intervals: Practice explaining missing AWOS visibility rules, 12- and 24-calendar-month training windows, and single-pilot vs. two-pilot duty limits.
  • Prepare PIC records if using SIC PDP time: Verify that every flight logged under 14 CFR 135.99(c) and 61.159(c) has the required PIC signature, certificate number, and 135.63 operator records.

Practice example

You are assigned a two-pilot cargo flight sequence under a Part 135 SIC Professional Development Program (OpSpec A062). Halfway through the sequence, your assigned First Officer is removed from the flight. Since you are already at the outstation, can you complete the remaining legs single-pilot using the two-pilot flight time limits under the 14 CFR 135.263(d) 'circumstances beyond the control of the operator' exception?

Example answer, written by us. It is not a real applicant's story. I cannot use the two-pilot flight time limits or the 14 CFR 135.263(d) exception to finish the sequence. Under 14 CFR 135.99(c)(3) and FAA Advisory Circular 135-43, both the PIC and the assigned SIC must comply with Part 135 Subpart F flight time, duty period, and rest requirements. AC 135-43 specifically states that when a flight sequence is assigned as a two-pilot operation under an SIC PDP, removing the assigned SIC from the flight for any reason is not considered a circumstance beyond the control of the air carrier or flight crewmember under 14 CFR 135.263(d). Before I can depart on the next leg as a single pilot, I must recalculate my schedule and verify that I meet all flight time, duty period, and rest requirements applicable to one-pilot operations under Subpart F. If the remaining flight time exceeds single-pilot limits, I must contact dispatch to delay the flight for required rest or arrange a qualified replacement SIC.

This answer states the legal decision in the first sentence, cites 14 CFR 135.99(c)(3), 135.263(d), and AC 135-43 accurately, and explains the exact operational step required before departing single-pilot.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

How do the BE1900, SA227, and EMB120 Captain requirements differ at Ameriflight?

All three positions require 1,000 hours PIC, 500 hours point-to-point cross-country, and prior Part 121 or 135 experience. Total time, multi-engine, and turbine minimums scale from 1,800 TT (250 ME, 100 turbine) on the BE1900 to 2,500 TT (250 ME, 500 turbine) on the SA227 Metroliner and 3,000 TT (500 ME, 200 turbine, 50 aircraft instrument) on the EMB120.

How does the Epic Flight Academy cadet pathway to Ameriflight work?

Cadets complete 10 months of primary student training and 15 months of advanced training as a Certified Flight Instructor to reach 1,200 hours total time. They then transfer directly to Ameriflight to work as a Captain for three years with access to airline gateway and flow-through programs.

How should new hires prepare for Part 135 initial training at Ameriflight?

Under 14 CFR Part 135 Subpart G and Subpart H, initial training covers company indoctrination, aircraft systems, emergency procedures, Crew Resource Management, and a 135.293 competency check. Confirm your specific class schedule, travel, and lodging arrangements directly with your recruiter before training begins.

Can a Part 135 Captain use an autopilot instead of an SIC for lower than standard takeoff minimums?

No. Under OpSpec C079 (IFR Lower than Standard Takeoff Minima), the airplane must be operated by a flightcrew of at least two pilots, and using an autopilot in place of a required SIC is prohibited.

Can a First Officer log PIC time when flying under a Part 135 SIC Professional Development Program?

No. Under 14 CFR 61.51(e)(1)(i) and 61.159(c)(4), an assigned SIC operating under a Part 135.99(c) SIC PDP may not log PIC flight time, even when acting as the sole manipulator of the controls.

Sources