ATI Airlines Pilot Qualification and Part 121 Training Guide
Short answer: Pilots preparing to apply to ATI Airlines or any all-cargo and supplemental air carrier operating under 14 CFR Part 121 must hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating under 14 CFR 121.436. Upgrading or hiring into a Pilot in Command seat requires an unrestricted ATP certificate and at least 1,000 hours of qualifying Part 121, Part 135, or Part 91K flight time, alongside a complete background review in the FAA Pilot Records Database (PRD).
Part 121 regulatory framework for all-cargo and charter air carriers
Air carriers that conduct domestic, flag, and supplemental operations, including large U.S. airlines, regional carriers, and all-cargo operators, operate under an FAA Part 121 certificate. For a cockpit seat at ATI Airlines or another Part 121 operator, every phase of your qualification, background check, and training pipeline is governed by Title 14 of the Code of Federal Regulations (14 CFR).
Under FAA rules, all Part 121 air carriers must also maintain an FAA-approved hazardous materials (dangerous goods) program. Carriers that accept, handle, and transport dangerous goods in air commerce must establish a complete training and handling program under 14 CFR Part 121 Subpart Z and 49 CFR Parts 100 through 185, overseen by FAA Hazardous Materials Aviation Safety Inspectors.
Federal pilot qualification requirements under 14 CFR 121.436
Before you can sit in the flight deck of any Part 121 aircraft as a required flightcrew member, you must meet the federal certificate and experience standards in 14 CFR 121.436 (up to date as of November 9, 2026). The rules draw a strict line between Second in Command (First Officer) and Pilot in Command (Captain) qualifications.
To act as Second in Command (SIC) in standard two-pilot Part 121 operations, you must hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the aircraft being flown. A second-in-command type rating obtained under 14 CFR 61.55 does not satisfy Part 121 requirements. However, if you serve as Second in Command in a flag or supplemental operation that requires three or more pilots, you must meet the full certificate and unrestricted ATP requirements of a Pilot in Command (except when acquiring operating experience under 14 CFR 121.434).
To act as Pilot in Command (PIC) in Part 121 operations, you must hold an unrestricted ATP certificate (not subject to the limitations of 14 CFR 61.167), hold an appropriate aircraft type rating for the aircraft being flown, and have at least 1,000 hours of qualifying flight time.
- Second in command time in Part 121 operations.
- Pilot in command time in fractional ownership operations under 14 CFR 91.1053(a)(2)(i).
- Pilot in command time in commuter or on-demand operations under 14 CFR 135.243(a)(1).
- Pilot in command time in eligible on-demand operations requiring the pilot to satisfy 14 CFR 135.4(a)(2)(ii)(A).
- Up to 500 hours of military flight time obtained as pilot in command in a multiengine, turbine-powered, fixed-wing airplane or powered-lift aircraft in an operation requiring more than one pilot.
- Flight time obtained as pilot in command in Part 121 operations prior to July 31, 2013 (pilots employed as PIC in Part 121 operations on July 31, 2013 are exempt from the 1,000-hour requirement).
ATP and Restricted ATP (R-ATP) certification pathways
Under 14 CFR Part 61 Subpart G, you can qualify for a Part 121 First Officer seat with either a standard unrestricted ATP certificate (14 CFR 61.159) or a restricted privileges ATP certificate (14 CFR 61.160). For a standard unrestricted ATP certificate in the airplane category, you must be at least 23 years old and log at least 1,500 hours of total time as a pilot.
Within those 1,500 total hours under 14 CFR 61.159, you must log at least 500 hours of cross-country time, 100 hours of night flight time, 50 hours of flight time in the class of airplane for the rating sought (up to 25 hours may be credited from a full flight simulator in an approved Part 121, 135, 141, or 142 course), and 75 hours of actual or simulated instrument time (with up to 25 hours of simulator or flight training device credit, or up to 50 hours if completed in a Part 142 course). You also need 250 hours of airplane PIC time (or SIC time performing PIC duties under supervision), which must include at least 100 hours of cross-country time and 25 hours of night flight time. Up to 100 hours of the total aeronautical experience may be obtained in an approved full flight simulator or flight training device representing an airplane in an approved Part 121, 135, 141, or 142 course.
If you qualify for a Restricted Privileges ATP (R-ATP) under 14 CFR 61.160 for a multiengine airplane rating, the minimum age drops to 21 years old and the cross-country requirement drops from 500 hours to 200 hours. Depending on your military or collegiate training background, your total pilot time requirement is also reduced. By our calculation from 14 CFR 61.159 and 61.160, an eligible U.S. military pilot graduate requires 50 percent of the standard 1,500-hour total time (750 hours saved), while a qualifying four-year aviation bachelor's degree graduate requires two-thirds of the standard total time (500 hours saved).
FAA ATP and Restricted ATP Aeronautical Experience Pathways (14 CFR 61.153, 61.159, and 61.160)
| Pathway | Minimum Age | Total Pilot Time | Cross-Country Time | Key Eligibility Requirement |
|---|---|---|---|---|
| Unrestricted ATP (61.159) | 23 years | 1,500 hours | 500 hours | Meets all standard Part 61 Subpart G experience minimums |
| R-ATP: U.S. Military Pilot (61.160(a)) | 21 years | 750 hours | 200 hours | Graduated from U.S. Armed Forces undergraduate pilot training school, honorable discharge or active service |
| R-ATP: Bachelor's Degree (61.160(b)) | 21 years | 1,000 hours | 200 hours | Aviation major with 60 FAA-recognized semester credit hours and Part 141 commercial/instrument training at an authorized institution |
| R-ATP: Associate's or Partial Credit (61.160(c)-(d)) | 21 years | 1,250 hours | 200 hours | Aviation major with 30 to 59 FAA-recognized semester credit hours and Part 141 commercial/instrument training at an authorized institution |
| R-ATP: 1,500 Hours Reduced XC (61.160(f)) | 21 years | 1,500 hours | 200 hours | Meets 1,500 hours total time and all other 61.159 minimums except holds 200 to 499 hours of cross-country time |
ATP Certification Training Program (ATP CTP) requirements
Before you can apply to take the knowledge test for an ATP certificate with an airplane category multiengine class rating (or an ATP certificate obtained concurrently with a multiengine airplane type rating), 14 CFR 61.153(e) and 61.156 require you to present a graduation certificate from an authorized training provider under Part 121, 135, 141, or 142 certifying completion of the Airline Transport Pilot Certification Training Program (ATP CTP). If a Part 121 carrier conducts its own ATP CTP under 14 CFR 121.410, that program must be kept separate from the carrier's Part 121 air carrier training program.
Under 14 CFR 61.156, the ATP CTP consists of at least 30 hours of classroom academic instruction and at least 10 hours of training in a qualified flight simulation training device (FSTD) representing a multiengine turbine airplane.
- 8 hours minimum of classroom instruction on aerodynamics, including high-altitude operations.
- 2 hours minimum of classroom instruction on meteorology, including adverse weather phenomena and weather detection systems.
- 14 hours minimum of classroom instruction on air carrier operations (physiology, communications, checklist philosophy, operational control, MEL/CDL, ground operations, turbine engines, transport category aircraft performance, and automation).
- 6 hours minimum of classroom instruction on leadership, professional development, crew resource management, and safety culture.
- 6 hours minimum of simulator training in a Level C or higher full flight simulator (FFS) qualified under Part 60 representing a multiengine turbine airplane with a maximum takeoff weight of 40,000 pounds or greater (covering low energy states/stalls, upset recovery techniques, and adverse weather).
- Up to 4 remaining hours of FSTD training in a Level 4 or higher flight simulation training device covering navigation (flight management systems) and automation (autoflight).
Pilot Records Database (PRD) background checks and pre-hire checklist
Under 14 CFR Part 111, every Part 121 air carrier acts as a reviewing entity and must evaluate your background in the FAA Pilot Records Database (PRD) before allowing you to begin service as a pilot. Beginning on September 9, 2024, the Pilot Records Improvement Act (PRIA) ceased to be effective and is no longer an available alternative to the PRD.
To register for access to the PRD Pilot User Portal, you must hold a Commercial, ATP, or Remote pilot certificate and a valid FAA medical certificate (private pilots cannot access the PRD system). Starting mid-November 2026, the FAA automatically disables PRD user accounts after 365 days of inactivity, so you must log in at least once a year to keep your account active. Follow this step-by-step checklist before your Part 121 interview and onboarding.
- Step 1 (At least 7 days before accessing records): Submit your electronic access application to the PRD under 14 CFR 111.305 with your full name as it appears on your pilot certificate, FAA certificate number, mailing address, phone number, and email address.
- Step 2 (Audit your FAA records): Review your FAA records in the PRD under 14 CFR 111.135, which include current pilot and medical certificates, type ratings and limitations, any failed attempt to pass a practical test for a certificate or type rating under Part 61, unoverturned enforcement actions, aviation accidents or incidents as PIC or SIC, and DOT drug and alcohol testing violations (verified positive drug tests, alcohol results of 0.04 or greater, or refusals to test).
- Step 3 (Audit employer-reported records): Check records uploaded by prior reporting entities under Subpart C, including training, qualification, and proficiency records (with check pilot comments and any unsatisfactory tasks), final disciplinary action records resulting in removal from aircraft operations, and final separation from employment records. Reporting entities must upload new records within 30 days of creation or finality, and Part 121 air carriers were required to report historical PRIA records dating back to August 1, 2005.
- Step 4 (Report errors if needed): If you find an error in your PRD file, report the inaccuracy through the PRD under 14 CFR 111.320. A reporting entity must correct a perceived error within 10 days or initiate a dispute investigation within 30 days.
- Step 5 (Update 5-year employment history and grant consent): Under 14 CFR 111.310, affirm that your employment history for the 5 years preceding the date of consent is complete and accurate, and grant written consent in the PRD for the hiring airline to review your records.
- Step 6 (Sign NDR consent and exercise right of review): Provide separate written consent under 14 CFR 111.310(c) for the airline to query the National Driver Register (NDR) for state motor vehicle driving records. Under 14 CFR 111.120(c), you may request a copy of any state driving records the airline obtains, and the carrier must provide them to you within 30 days of your request.
Part 121 initial training, OE, and line consolidation pipeline
Once hired by a Part 121 air carrier operating Group II (turbojet-powered) airplanes, as opposed to Group I (propeller-driven, reciprocating or turbopropeller-powered) airplanes under 14 CFR 121.400, you enter an FAA-approved training and qualification pipeline governed by 14 CFR Part 121 Subparts N and O. Every stage must be certified in your training record by an authorized instructor or check pilot before you can serve as a required crewmember.
Part 121 Group II (Turbojet) Pilot Training and Qualification Pipeline (14 CFR Part 121 Subparts N and O)
| Training or Qualification Phase | CFR Section | Minimum Programmed Hours or Cycles | Key Operational Rules |
|---|---|---|---|
| Basic Indoctrination Ground Training | 14 CFR 121.415(a)(1) | 40 programmed hours | Covers crewmember duties, FARs, operating certificate/OpSpecs, and company operating manual (unless reduced under 121.405). |
| Initial Ground Training (Group II Turbojet) | 14 CFR 121.419(c)-(d) | n/a | Covers aircraft systems, weight and balance, performance, and emergency equipment (unless reduced under 121.405). |
| Emergency Drills and High-Altitude Training | 14 CFR 121.417 | One-time initial drills + 24-month recurrent drills | Requires PBE firefighting drill, emergency evacuation slide drill, and instruction on hypoxia/decompression for operations above 25,000 feet. |
| Extended Envelope and Flight Training | 14 CFR 121.423 & 121.424 | Completed in Level C or higher FFS | Covers maneuvers, low-altitude windshear, and extended envelope training, and concludes with type rating practical test or 121.441 proficiency check. |
| Operations Familiarization | 14 CFR 121.435 | At least 2 operating cycles | Applies to new hires who began basic indoctrination on or after April 27, 2022. The pilot occupies flight deck observer seat using an operational headset before OE. |
| Operating Experience (OE): Initial Group II | 14 CFR 121.434(c)(3)(i) | 25 flight hours and at least 4 operating cycles (at least 2 as pilot flying) | Conducted inflight under supervision of a check pilot. Qualifying PICs must also be observed by an FAA inspector on at least 1 flight leg. |
| Consolidation of Knowledge and Skills | 14 CFR 121.434(g)-(h) | 100 hours of line operating flight time (including OE) | Must be completed within 120 days of practical test or proficiency check (extendable to 150 days with refresher training or check pilot observation on or before day 120). |
Line operating limitations, recency, and recurrent checks
After completing Operating Experience, you are released to the line, but 14 CFR 121.438 places specific pairing and operating limitations on new crewmembers. First, no person may conduct Part 121 operations unless either the Pilot in Command or the Second in Command has at least 75 hours of line operating flight time in that airplane type.
Second, special rules apply if the Second in Command has fewer than 100 hours of flight time as SIC in Part 121 operations in that airplane type and the Pilot in Command is not an appropriately qualified check pilot. In that situation, the PIC must make all takeoffs and landings at special airports designated by the FAA or the carrier. The PIC must also make the takeoff or landing whenever prevailing visibility in the latest weather report is at or below 3/4 mile, or runway visual range (RVR) for the runway to be used is at or below 4,000 feet. Additionally, the PIC must fly when the runway has water, snow, slush, or similar conditions that may adversely affect performance, or when braking action is reported to be less than good. Finally, the PIC must make the takeoff or landing if the crosswind component exceeds 15 knots, if windshear is reported in the vicinity of the airport, or in any other condition in which the PIC determines it is prudent to exercise the PIC's prerogative.
Throughout your Part 121 career, you must maintain strict recency and checking intervals under Subpart O. Under 14 CFR 121.439, you must complete at least 3 takeoffs and landings within the preceding 90 days in the airplane type (or in an approved Level B or higher full flight simulator). If you lapse beyond 90 days, you must re-establish recency under a check pilot's supervision by performing at least 3 takeoffs and landings. Those maneuvers must include at least one takeoff with a simulated failure of the most critical powerplant, one landing from an ILS approach to the lowest ILS minimum authorized for the carrier, and one landing to a full stop. Under 14 CFR 121.440 and 121.441, a Pilot in Command must pass a line check every 12 calendar months, a proficiency check every 12 calendar months, and either a proficiency check or an approved FFS training course within the preceding 6 calendar months. Second in Command pilots must complete a proficiency check or line-oriented flight training course within the preceding 24 calendar months, and either a proficiency check or any approved FFS training course within the preceding 12 calendar months.
Practice example
You are a newly qualified First Officer with 65 hours of line operating time in type, and you are scheduled to fly the arrival leg into a hub airport where the crosswind component just increased to 18 knots and braking action is reported as medium. How do you handle the approach briefing and transfer of controls with your Captain?
Example answer, written by us. It is not a real applicant's story. Because I have 65 hours in the airplane type, I am still inside my 100-hour consolidation window and subject to the operating limitations of 14 CFR 121.438. Under that rule, when the Second in Command has fewer than 100 hours in type and the Captain is not a check pilot, the Captain must make the takeoff or landing if the crosswind component exceeds 15 knots or if the braking action is reported as less than good. Here, both triggers apply with an 18-knot crosswind and medium braking action. During our descent preparation, before we even start the approach briefing, I would speak up and remind the Captain that I have 65 hours in type and that 14 CFR 121.438 requires the Captain to be the pilot flying for this landing. We would transfer roles cleanly at high altitude, brief the Captain's approach and landing plan, verify our contaminated runway landing distance performance numbers, and I would transition fully into pilot monitoring duties for the arrival.
This answer cites the exact regulatory threshold in 14 CFR 121.438 (100 hours in type, 15-knot crosswind, and braking action less than good) and shows proactive crew resource management by transferring controls early in the descent rather than waiting until short final.
Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview
Frequently asked questions
What are the FAA minimum pilot qualifications to fly for a Part 121 airline?
Under 14 CFR 121.436, a Second in Command (First Officer) must hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating (a 14 CFR 61.55 SIC type rating does not qualify). A Pilot in Command (Captain) must hold an unrestricted ATP certificate, an appropriate aircraft type rating, and at least 1,000 hours of qualifying flight time, such as Part 121 SIC time or qualifying Part 135 or Part 91K PIC time.
Can military pilots credit flight time toward the Part 121 Captain 1,000-hour rule?
Yes. Under 14 CFR 121.436(c), a pilot may credit up to 500 hours of military flight time toward the 1,000-hour Part 121 PIC requirement if the time was obtained as pilot in command in a multiengine, turbine-powered, fixed-wing airplane or powered-lift aircraft in an operation requiring more than one pilot.
How many flight hours are required for a Restricted ATP (R-ATP) certificate?
Under 14 CFR 61.160, pilots at least 21 years old with at least 200 hours of cross-country time can qualify for a restricted privileges multiengine ATP with 750 total hours as a U.S. military pilot graduate, 1,000 total hours with a qualifying aviation Bachelor's degree (60 semester credit hours), or 1,250 total hours with a qualifying aviation Associate's degree (30 semester credit hours).
How do Part 121 airlines check pilot background records during hiring?
Under 14 CFR Part 111, Part 121 air carriers must evaluate your records in the FAA Pilot Records Database (PRD), which permanently replaced PRIA on September 9, 2024. Before you begin service, the airline reviews your FAA certificate, enforcement, accident, and practical test failure records, DOT drug and alcohol records, 5-year employment history, prior employer training and disciplinary records, and National Driver Register (NDR) motor vehicle records.
How much Operating Experience (OE) and consolidation time is required in Part 121 turbojet airplanes?
Under 14 CFR 121.434, initial training in Group II (turbojet) airplanes requires 25 hours of inflight Operating Experience under a check pilot, including at least 4 operating cycles with at least 2 as the pilot flying. Both Captains and First Officers must also complete 100 hours of line operating flight time (which includes OE) for consolidation of knowledge and skills within 120 days of their practical test or proficiency check.
Sources
- 14 CFR 121.436 Pilot Qualification: Certificates and Experience Requirements (eCFR)
- 14 CFR Part 121 Subpart O Crewmember Qualifications (eCFR)
- 14 CFR Part 121 Subpart N Training Program (eCFR)
- 14 CFR Part 61 Subpart G Airline Transport Pilots (eCFR)
- 14 CFR Part 111 Pilot Records Database (eCFR)
- FAA Pilot Records Database (PRD) Portal
- FAA Pilot Records Improvement Act of 1996 (PRIA)
- FAA Regularly Scheduled Air Carriers (Part 121) Hazardous Materials Program