Atlas Air First Officer: FAA Part 121 Requirements, PRD Checklist, and Interview Prep
Short answer: If your goal is to fly as an Atlas Air First Officer, you must meet the federal qualification rules in 14 CFR 121.436, which require every Part 121 second in command to hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating. For Part 121 flag or supplemental operations requiring three or more pilots, the second in command must hold an unrestricted ATP certificate with at least 1,500 hours of total time under 14 CFR 61.159, not subject to the restricted privileges limitations of 14 CFR 61.167.
FAA Part 121 Second in Command (First Officer) Requirements
Every First Officer flying for a U.S. Part 121 air carrier must meet the federal qualification rules in 14 CFR 121.436 and 14 CFR Part 61 Subpart G. Under 14 CFR 121.436, no pilot may act as second in command in Part 121 operations unless they hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the aircraft being flown. A second-in-command type rating obtained under 14 CFR 61.55 does not satisfy Part 121 requirements.
Long-haul widebody flying adds a critical regulatory distinction. Under 14 CFR 121.436 and 14 CFR 61.167, if a Part 121 flag or supplemental operation requires three or more pilots (augmented crew operations common on long-range international flights), the second in command must hold an unrestricted ATP certificate not subject to the restricted privileges limitations of 14 CFR 61.167.
Under 14 CFR 61.157(c) and (f), an employee of a Part 121 certificate holder who completes the carrier's approved training program and passes a Part 121.441 proficiency check with an FAA Aviation Safety Inspector, Aircrew Program Designee, or authorized Training Center Evaluator satisfies the flight proficiency requirements for adding the aircraft type rating to their ATP certificate.
By our calculation from 14 CFR 61.159 and 61.160, a military-trained pilot qualifying for a Restricted ATP at 750 hours needs 50 percent of the 1,500 total hours required for an unrestricted ATP, while an Associate's aviation degree graduate qualifying at 1,250 hours needs 250 fewer hours than the 1,500-hour unrestricted standard.
FAA ATP and R-ATP Aeronautical Experience Minimums (14 CFR 61.153, 61.159, and 61.160, as of November 2026)
| Certificate Path | Minimum Age | Minimum Total Time | Minimum Cross-Country | Part 121 Flag/Supplemental (3+ Pilots) Eligible |
|---|---|---|---|---|
| Unrestricted ATP (14 CFR 61.159) | 23 years | 1,500 hours | 500 hours | Yes |
| R-ATP: U.S. Military Pilot (14 CFR 61.160(a)) | 21 years | 750 hours | 200 hours | No |
| R-ATP: Bachelor's Aviation Major, 60 Credits (14 CFR 61.160(b)) | 21 years | 1,000 hours | 200 hours | No |
| R-ATP: Associate's Aviation Major, 30 Credits (14 CFR 61.160(c)) | 21 years | 1,250 hours | 200 hours | No |
| R-ATP: 1,500 Hours at Age 21-22 (14 CFR 61.160(f)) | 21 years | 1,500 hours | 200 hours | No |
Detailed Breakdown of 14 CFR 61.159 Hour Requirements and ATP CTP
To hold an unrestricted multiengine airplane ATP certificate under 14 CFR 61.159(a), your 1,500 hours of total pilot time must include specific aeronautical experience sub-requirements. Up to 100 hours of total aeronautical experience may be obtained in an approved full flight simulator or flight training device representing an airplane as part of an approved Part 121, 135, 141, or 142 training course.
Commercial pilots with flight engineer experience gained in Part 121 operations or the U.S. Armed Forces under 14 CFR 61.159(d) may credit 1 hour for each 3 hours of flight engineer time toward the 1,500-hour total time requirement, up to 500 credited hours. Commercial pilots logging second-in-command time under an approved Part 135.99 SIC professional development program (14 CFR 61.159(c)) may also count that time toward total time, though it cannot count toward the 250-hour airplane PIC requirement. Note that crediting night landings or flight engineer or Part 135 SIC PDP time under 14 CFR 61.159(b) through (d) places an ICAO PIC limitation on the certificate until full ICAO requirements are met (14 CFR 61.159(e) and (f)).
Before you can apply for the multiengine ATP knowledge test, 14 CFR 61.153(e) and 61.156 require you to graduate from an Airline Transport Pilot Certification Training Program (ATP CTP). By our calculation from 14 CFR 61.156, the ATP CTP requires at least 40 total hours of instruction, split between 30 hours of academic classroom training (75 percent of the course minimum) and 10 hours in a flight simulation training device (25 percent).
- 500 hours of cross-country flight time (200 hours for R-ATP under 14 CFR 61.160)
- 100 hours of night flight time (applicants with at least 20 night full-stop takeoffs and landings may substitute each additional night full-stop takeoff and landing for 1 hour of night time, up to 25 hours)
- 50 hours of flight time in the class of airplane (multiengine land), with up to 25 hours credited from an approved full flight simulator
- 75 hours of actual or simulated instrument time (up to 25 hours in a simulator/FTD, or 50 hours under a Part 142 course)
- 250 hours of airplane PIC time (or SIC performing PIC duties under supervision), including at least 100 hours of PIC cross-country and 25 hours of PIC night
- ATP CTP Academic minimum (30 hours): 8 hours aerodynamics and high-altitude operations, 2 hours meteorology and weather detection, 14 hours air carrier operations, and 6 hours leadership, CRM, and safety culture
- ATP CTP Simulator minimum (10 hours): at least 6 hours in a Level C or higher full flight simulator (40,000 pounds or greater maximum takeoff weight) covering low energy states/stalls, upset recovery, and adverse weather, plus 4 hours in a Level 4 or higher FSTD covering FMS navigation and autoflight
Pilot Scholarships for Aspiring Widebody First Officers
For students working toward a professional pilot career with a goal of flying for a widebody operator like Atlas Air, the Road to Giant Pilot Pathway Scholarship Program awards a $10,000 non-returnable, non-binding scholarship (atlasairworldwide.com, as of November 2026) to help students continue their aviation education, alongside $3,000 employee dependent scholarships (atlasairworldwide.com, as of November 2026) administered through Scholarship America.
Pre-Hire Checklist: Pilot Records Database (PRD) Compliance
Before any Part 121 air carrier can permit you to begin service as a pilot, 14 CFR Part 111 requires the operator to evaluate your complete history in the FAA Pilot Records Database (PRD). Beginning September 9, 2024, PRIA ceased to be an alternative to the PRD under 14 CFR 111.5.
Under 14 CFR 111.225, reporting entities upload training, qualification, and proficiency records within 30 days of creation, including the date of the event, aircraft type, duty position, training curriculum, satisfactory or unsatisfactory result, and any check pilot comments on unsatisfactory tasks. Under 14 CFR 111.230 and 111.235, final disciplinary actions pertaining to pilot performance and final separation from employment records are also reported, while Voluntary Safety Reporting Program submissions protected under Part 193 are excluded from the PRD under 14 CFR 111.245.
Use our pre-application checklist below to prepare your federal records before submitting your First Officer application.
- Step 1: Apply for electronic PRD access under 14 CFR 111.305 at least 7 days before you need to grant an airline access, using your exact pilot certificate name and FAA certificate number.
- Step 2: Audit your FAA records in the PRD (14 CFR 111.135), including current certificates, type ratings, medical class, any practical test failures under Part 61, enforcement actions, accidents/incidents, and DOT drug and alcohol testing history.
- Step 3: Verify and update your 5-year employment history in the PRD (14 CFR 111.310(b)). You must affirm that your employment history for the 5 years preceding the date of consent is accurate and complete.
- Step 4: Provide written consent in the PRD for the reviewing carrier to access your PRD file and separate written consent for a National Driver Register (NDR) motor vehicle driving history search under 14 CFR 111.110.
- Step 5: Review any state driving records returned via the NDR search (under 14 CFR 111.120(c), you may request copies from the carrier, which must be provided within 30 days) and report any PRD inaccuracies for correction under 14 CFR 111.320.
- Step 6: Practice telling your own stories out loud for CRM, high-altitude aerodynamics, and long-haul operational scenarios so you can explain your decision-making clearly without sounding rehearsed.
How to Prepare for Long-Haul Widebody Interview Scenarios
When you prepare for a widebody First Officer interview, practice explaining how you manage workload, fatigue, automation, and standard operating procedures across multi-pilot international legs. Rather than memorizing scripted answers, focus on walking through real moments from your own logbook where you used crew resource management, backed up a captain, or made a conservative safety call.
Your technical review should cover the core aeronautical knowledge areas tested for an Airline Transport Pilot certificate under 14 CFR 61.155(c) and the ATP CTP syllabus under 14 CFR 61.156. Review high-altitude aerodynamics, low-energy states and stall recovery, upset recovery techniques, transport category aircraft performance, weight and balance computations, and minimum equipment list (MEL) and configuration deviation list (CDL) procedures. Practice briefing weather charts, fronts, icing, windshear and microburst avoidance, and operational control rules out loud so your explanations are structured and concise.
Pair your technical study with behavioral stories that demonstrate checklist discipline, flight path monitoring, and clear crew communication under pressure. For every scenario you practice, state the operational conditions, the specific procedure or callout you used, how you coordinated with the other pilot or dispatch, and what you learned from the flight.
If you have any failed practical tests or training events in your PRD record under 14 CFR 111.135 or 111.225, prepare a direct, accountable explanation. State the date and certificate or rating sought, own the root cause without blaming the examiner or weather, and explain the specific procedural habit you changed for every check ride since.
Practice example
Tell me about a time you noticed a captain or fellow crewmember deviating from a standard operating procedure during a busy phase of flight. How did you handle it?
Example answer written by our team. The applicant is invented. While flying a night freight leg into Chicago in marginal weather, ATC gave us a late runway change during our descent check. My captain quickly loaded the new ILS approach into the flight management system and called for the approach briefing complete without cross-checking the final approach fix altitude against the chart. Because we were already below 12,000 feet and being vectored toward the localizer, workload was high. I spoke up calmly using standard callouts and said I needed 30 seconds to verify the new chart waypoints and minimums on my display before we armed the approach mode. When I read the step-down fix aloud, we caught that an intermediate altitude restriction had not loaded properly. We fixed the constraint together, briefed the missed approach, and flew a stabilized approach to landing. It reinforced for me that a quick, respectful verification callout protects both pilots when last-minute changes compress your time.
This answer sets a clear operational scene, uses non-confrontational crew resource management language, and shows how the First Officer protected flight path safety while supporting the captain. It focuses on specific cockpit actions and SOP compliance rather than criticizing the other pilot.
Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview
Frequently asked questions
What FAA certificates are required to fly as a Part 121 First Officer?
Under 14 CFR 121.436, a pilot acting as second in command in Part 121 operations must hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the aircraft being flown.
Can you fly as a Part 121 First Officer on an augmented crew with a Restricted ATP?
No. Under 14 CFR 121.436 and 14 CFR 61.167, a pilot acting as second in command in a Part 121 flag or supplemental operation that requires three or more pilots must hold an unrestricted ATP certificate.
What is the ATP CTP requirement before taking the multiengine ATP knowledge test?
Under 14 CFR 61.156, applicants must complete at least 30 hours of academic classroom instruction and at least 10 hours of training in a qualified flight simulation training device before applying for the multiengine ATP knowledge test.
What records must a Part 121 carrier review in the Pilot Records Database before you begin service?
Under 14 CFR Part 111, the carrier must evaluate your FAA certificate and medical records, Part 61 practical test failures, training and proficiency records, drug and alcohol testing history, 5-year employment history, and National Driver Register search results.
Sources
- Atlas Air Worldwide: Tailwinds Blog Archives
- eCFR: 14 CFR 121.436 Pilot Qualification: Certificates and Experience Requirements
- eCFR: 14 CFR Part 61 Subpart G Airline Transport Pilots
- eCFR: 14 CFR Part 111 Pilot Records Database
- Federal Aviation Administration: Pilot Training and ATP CTP
- ecfr.gov
- ecfr.gov
- ecfr.gov