ATP Multi Engine Requirements (14 CFR Part 61 Subpart G)
Short answer: To earn an unrestricted FAA Airline Transport Pilot (ATP) certificate with an airplane category multiengine class rating, you must be at least 23 years old and hold a Commercial Pilot Certificate with an instrument rating (or military or foreign equivalent). You must also complete the 40-hour ATP Certification Training Program (ATP CTP), pass the ATP multiengine knowledge and practical tests, and log at least 1,500 hours of total flight time including 50 hours in multiengine airplanes (14 CFR 61.153, 61.156, and 61.159, as of November 2026). Pilots who are at least 21 years old can qualify for a restricted privileges multiengine ATP (R-ATP) with 200 hours of cross-country time and reduced total hours of 750, 1,000, or 1,250 hours depending on military training or an approved aviation degree.
ATP multiengine certificate vs. commercial multiengine add-on
Adding a multiengine class rating to a Private or Commercial Pilot Certificate prepares you to fly twin-engine airplanes as pilot in command (PIC) outside of air carrier operations. An Airline Transport Pilot (ATP) certificate with an airplane category multiengine class rating is the FAA's highest pilot certificate governed by 14 CFR Part 61 Subpart G.
Under 14 CFR 121.436, both the captain (PIC) and first officer (SIC) in Part 121 air carrier operations must hold an ATP certificate and an appropriate aircraft type rating for the airplane flown. Certain Part 135 commuter, Part 135 on-demand, and Part 91 Subpart K fractional ownership operations also require the PIC to hold an ATP certificate with a multiengine class rating under 14 CFR 135.243(a)(1) and 91.1053(a)(2)(i).
- Unrestricted Multiengine ATP (14 CFR 61.159): Requires age 23, ATP CTP graduation, the ATP Multiengine (ATM) knowledge test, 1,500 hours total time, 500 hours cross-country, and 50 hours in multiengine airplanes.
- Restricted Privileges Multiengine ATP: Requires age 21, ATP CTP graduation, the ATM knowledge test, 200 hours cross-country, 50 hours in multiengine airplanes, and 750 to 1,500 hours total time depending on your training pathway.
- Single-Engine to Multiengine ATP Upgrade (14 CFR 61.165(f)): Requires ATP CTP graduation, passing the multiengine ATP knowledge test, meeting the 50-hour multiengine class requirement in 14 CFR 61.159, and passing the multiengine ATP practical test.
General eligibility requirements (14 CFR 61.153)
Before you schedule your checkride, you must meet the baseline eligibility standards in 14 CFR 61.153. While you must be 23 years old for an unrestricted ATP or 21 years old for a restricted privileges ATP at the time of the practical test, 14 CFR 61.35 allows you to take the ATP multiengine knowledge test once you reach 18 years of age and present your ATP CTP graduation certificate.
- Age: At least 23 years old for an unrestricted ATP under 14 CFR 61.159, or at least 21 years old for a restricted privileges ATP.
- Language and character: Able to read, speak, write, and understand the English language, and be of good moral character.
- Prerequisite pilot credential: Hold an FAA Commercial Pilot Certificate with an instrument rating, meet U.S. military experience requirements under 14 CFR 61.73 for a commercial pilot certificate and instrument rating, or hold an unrestricted foreign ATP or foreign commercial pilot license with instrument privileges issued by an ICAO contracting State.
- ATP CTP and testing: Present an ATP CTP graduation certificate (14 CFR 61.156) before applying for the knowledge test, meet all aeronautical experience requirements before applying for the practical test, and pass both the aeronautical knowledge test (14 CFR 61.155) and the practical test (14 CFR 61.157).
ATP Certification Training Program (ATP CTP) rules (14 CFR 61.156)
Anyone applying for the knowledge test for an ATP certificate with an airplane category multiengine class rating, or an ATP certificate obtained concurrently with a multiengine airplane type rating, must first complete the ATP CTP under 14 CFR 61.156. This rule is mandatory for all multiengine ATP applicants but does not apply to single-engine ATP applicants.
The course must be completed through an authorized training provider certificated under 14 CFR Part 121, 135, 141, or 142. Under 14 CFR 61.156 and FAA Advisory Circular (AC) 61-138, the curriculum combines 30 hours of academic classroom instruction with 10 hours of training in a qualified Flight Simulation Training Device (FSTD).
Mandatory ATP CTP curriculum hours under 14 CFR 61.156
| Training phase | Minimum hours | Required device or subject breakdown |
|---|---|---|
| Academic: Aerodynamics | 8 hours | High altitude operations, low energy states, stall prevention and recovery, and upset prevention and recovery |
| Academic: Meteorology | 2 hours | Adverse weather phenomena, icing, windshear, and airborne weather detection systems |
| Academic: Air carrier operations | 14 hours | Physiology, communications, checklist philosophy, operational control, MEL/CDL, ground operations, turbine engines, transport performance, and automation |
| Academic: Leadership and CRM | 6 hours | Leadership, professional development, crew resource management (CRM), and safety culture |
| FSTD: Full Flight Simulator (FFS) | 6 hours | Level C or higher FFS representing a multiengine turbine airplane with a maximum takeoff weight of 40,000 pounds or more (low energy states/stalls, upset recovery, adverse weather) |
| FSTD: Navigation and automation | 4 hours | Level 4 or higher FSTD representing a multiengine turbine airplane (navigation including flight management systems and automation including autoflight) |
Unrestricted ATP multiengine flight hour requirements (14 CFR 61.159)
To qualify for an unrestricted ATP certificate with an airplane category and multiengine class rating under 14 CFR 61.159(a), you need at least 1,500 hours of total time as a pilot. Within those 1,500 hours, your logbook must meet specific minimums for cross-country, night, multiengine class, instrument, and pilot-in-command flight time, subject to the FAA's simulator credit caps.
14 CFR 61.159 aeronautical experience requirements and simulator credit limits
| Experience category | Minimum hours required | Simulator credit rules and logging allowances (14 CFR 61.159) |
|---|---|---|
| Total time as a pilot | 1,500 hours | At most 100 hours of total aeronautical experience may be obtained in an FFS or FTD representing an airplane in an approved Part 121, 135, 141, or 142 course. |
| Cross-country flight time | 500 hours | Must include at least 100 hours of cross-country time as PIC (or supervised SIC performing PIC duties) in an airplane. |
| Night flight time | 100 hours | Must include at least 25 hours of night time as PIC (or supervised SIC). Pilots with at least 20 night full-stop takeoffs and landings may substitute each additional night full-stop takeoff and landing for 1 hour of night time, up to 25 hours. |
| Multiengine class flight time | 50 hours | Up to 25 hours of training in an FFS representing a multiengine airplane may be credited from an approved Part 121, 135, 141, or 142 course. An FTD or ATD cannot be used. |
| Instrument flight time | 75 hours | Actual or simulated instrument conditions. Up to 25 hours of simulated instrument time in an FFS or FTD representing an airplane may be credited (or up to 50 hours if completed in a Part 142 course). |
| Airplane PIC time | 250 hours | Logged as PIC in an airplane, or as SIC performing the duties of PIC while under the supervision of a PIC, or any combination thereof. Must include 100 hours cross-country and 25 hours night. |
Restricted privileges ATP (R-ATP) pathways and hours
Under 14 CFR 61.160, the restricted privileges ATP (R-ATP) certificate is issued only for an airplane category multiengine class rating or concurrently with a multiengine airplane type rating. All R-ATP pathways allow you to apply at age 21 and reduce the cross-country requirement from 500 hours down to 200 hours, while keeping all other sub-requirements of 14 CFR 61.159 intact.
By our calculation from 14 CFR 61.159 and 61.160, qualifying for an R-ATP reduces your required cross-country flight time by 300 hours (a 60 percent reduction from the 500-hour unrestricted requirement) and cuts your total pilot time requirement by 250 to 750 hours depending on your military or academic background.
Restricted privileges multiengine ATP (R-ATP) pathways
| Pathway | Minimum total hours | Minimum XC hours | Key qualification and documentation requirements |
|---|---|---|---|
| U.S. military pilots (61.160(a)) | 750 hours | 200 hours | Honorably discharged (Form DD-214) or active U.S. Armed Forces record, plus official record of graduating from a U.S. Armed Forces undergraduate pilot training school as a rated military pilot. |
| Bachelor's degree with aviation major (61.160(b)) | 1,000 hours | 200 hours | Bachelor's degree with an aviation major from an institution holding an FAA Letter of Authorization (LOA) under 61.169, 60 semester credit hours of recognized aviation coursework, Part 141 commercial/instrument training at the institution (or affiliated Part 141 school), and official certifying transcript. |
| Associate's degree with aviation major (61.160(c)) | 1,250 hours | 200 hours | Associate's degree with an aviation major from an FAA-authorized institution under 61.169, at least 30 semester credit hours of recognized aviation coursework, integrated Part 141 commercial/instrument training, and official certifying transcript. |
| Bachelor's degree with 30 to 59 aviation credits (61.160(d)) | 1,250 hours | 200 hours | Graduate of an FAA-authorized institution under 61.169 who completes at least 30 but fewer than 60 semester credit hours of recognized aviation coursework and otherwise satisfies 61.160(b). |
| Age 21 with 1,500 hours (61.160(f)) | 1,500 hours | 200 hours | At least 21 years old, 1,500 hours total time as a pilot, at least 200 hours of cross-country time, and meets all other aeronautical experience requirements of 14 CFR 61.159. |
Worked example and logbook audit checklist
Before submitting FAA Form 8710-1, audit your logbook against 14 CFR 61.159 and 61.160. Consider a worked example written by our team: a 22-year-old commercial pilot graduated from an FAA-authorized university under 14 CFR 61.169 with a bachelor's degree in aviation, 60 semester credit hours of approved coursework, and integrated Part 141 commercial and instrument ratings.
This pilot has logged 1,010 hours of total time, including 215 hours of cross-country time, 85 hours of night time with 35 night full-stop takeoffs and landings, and 80 hours of instrument time (20 hours in a Part 141 FTD). The logbook also shows 260 hours of airplane PIC time (110 hours PIC cross-country and 30 hours PIC night), 30 hours in a multiengine airplane, and 20 hours of multiengine FFS training in an approved Part 142 course. Under 14 CFR 61.159(b), the 15 night full-stop landings beyond the first 20 credit 15 hours toward the 100-hour night requirement, bringing credited night time to 100 hours. Under 14 CFR 61.159(a)(3), the 20 FFS hours combine with the 30 airplane hours to satisfy the 50-hour multiengine class requirement. Because the pilot used the night landing substitution under 61.159(b) and qualifies under 61.160(b), the certificate will carry both the R-ATP limitation and the ICAO PIC limitation until full 61.159 and ICAO standards are met.
- Step 1: Verify your ATP CTP graduation certificate is dated prior to your ATM knowledge test, and confirm your ATM test report is within its 60-calendar-month validity window (FAA Notice N 8900.225).
- Step 2: Confirm you have at least 25 hours in an actual multiengine airplane and at most 25 hours in a multiengine FFS from an approved Part 121, 135, 141, or 142 course. Subtract any FTD or ATD hours from your 50-hour multiengine class count (14 CFR 61.159(a)(3)).
- Step 3: Check your 250-hour airplane PIC column for at least 100 hours of PIC cross-country and 25 hours of PIC night.
- Step 4: Confirm all FFS and FTD hours credited toward your total time do not exceed 100 hours from an approved Part 121, 135, 141, or 142 course (14 CFR 61.159(a)(6)).
- Step 5: Gather your R-ATP proof if applying under the restricted privileges rules: your official college transcript bearing the institution's certifying statement, or your Form DD-214 and military undergraduate pilot training graduation record.
Tests, privileges, limitations, and special logging rules
After completing the ATP CTP, you can take the ATP Multiengine Airplane (ATM) knowledge test covering the areas in 14 CFR 61.155(c). Under FAA Notice N 8900.225 and the 2013 Pilot Certification Final Rule (78 FR 42324), an ATM knowledge test passed after completing the ATP CTP is valid for 60 calendar months (5 years). Pilots employed by Part 121, 125, or 135 operators may use an expired knowledge test if they have completed the ATP CTP and the operator's approved initial or PIC training program.
The practical test under 14 CFR 61.157(e)(2) covers eight areas of operation: preflight preparation, preflight procedures, takeoffs and landings, in-flight maneuvers, stall prevention, instrument procedures, emergency operations, and postflight procedures. Concurrent aircraft type ratings must be tested in actual or simulated instrument conditions (14 CFR 61.157(b)(3)), and completing an authorized Part 121 proficiency check or Part 135/91K competency and instrument proficiency check satisfies the practical test requirement (14 CFR 61.157(f)).
Under 14 CFR 61.23 and 78 FR 42324, serving as SIC in a two-pilot Part 121 operation requires at least a second-class medical certificate, whereas exercising PIC privileges of an ATP certificate (or serving as SIC in a flag or supplemental operation requiring three or more pilots) requires a first-class medical certificate.
Upgrading to captain (PIC) in Part 121 operations under 14 CFR 121.436 requires an unrestricted ATP certificate, a first-class medical certificate, and at least 1,000 flight hours in air carrier operations (as a Part 121 SIC, or as a PIC under 14 CFR 135.243(a)(1) or 91.1053(a)(2)(i), with up to 500 hours creditable from multiengine turbine military PIC time in multi-pilot operations). Under 14 CFR 61.167(a)(2), an unrestricted ATP holder aged 23 or older may instruct other pilots in air transportation service in rated aircraft (for at most 8 hours in any 24-consecutive-hour period and at most 36 hours in any 7-consecutive-day period, excluding briefings and debriefings).
- R-ATP operational limitations (14 CFR 61.167(b) and 61.160(g)): Carries the limitation 'Restricted in accordance with 14 CFR 61.167.' The holder cannot act as PIC in Part 121, 14 CFR 91.1053(a)(2)(i), or 14 CFR 135.243(a)(1) operations, or serve as SIC in Part 121 flag or supplemental operations requiring three or more pilots. The restriction is removed upon reaching age 23 and presenting evidence of meeting full 14 CFR 61.159 experience (1,500 hours total time and 500 hours cross-country).
- Flight engineer and Part 135 SIC credits (14 CFR 61.159(c)-(d)): Commercial pilots may credit 1 hour for each 3 hours of eligible Part 121 or U.S. Armed Forces flight engineer time toward total time (up to 500 hours).
- ICAO limitation (14 CFR 61.159(e) and 61.160(h)): Applicants qualifying under R-ATP reduced hours, or using night landing substitution, Part 135 SIC PDP time, or flight engineer credit, receive the limitation 'Holder does not meet the pilot in command aeronautical experience requirements of ICAO' until full ICAO and 14 CFR 61.159 requirements are met.
How to explain your ATP multiengine qualifications in an interview
During a technical interview, panel captains review your FAA Form 8710-1 and logbook totals to confirm you understand the regulatory limits on your certificate. If you hold an R-ATP or used simulator credits toward your 50-hour multiengine class requirement, expect the panel to ask how your hours satisfy 14 CFR 61.159 or 61.160 and what operational restrictions apply to your certificate.
Practice walking through your logbook numbers out loud in plain, structured sentences. State the exact regulation section, give your total and category hours without guessing, and explain what you can and cannot legally fly.
Practice example
Walk me through how your logbook meets the 50-hour multiengine class requirement under 14 CFR 61.159, and tell me what limitations will appear on your certificate if you qualify for a Restricted ATP today.
Example answer, written by us. It is not a real applicant's story. Under 14 CFR 61.159(a)(3), I need 50 hours of flight time in multiengine airplanes, and I can credit up to 25 hours from a full flight simulator in an approved Part 121, 135, 141, or 142 training course. Right now I have 32 hours in a multiengine airplane from my commercial multiengine training and instructing, plus 6 hours in a Level C full flight simulator from my Part 142 ATP CTP course. Once I complete initial simulator training here at the airline, 18 of those full flight simulator hours will bring me to the 50-hour requirement. Because I am 22 years old and qualifying at 1,000 total hours with 220 hours of cross-country time under 14 CFR 61.160(b), my certificate will carry two limitations: 'Restricted in accordance with 14 CFR 61.167' and 'Holder does not meet the pilot in command aeronautical experience requirements of ICAO.' Under 61.167, I can serve as second in command in two-pilot Part 121 operations, but I cannot act as PIC in Part 121, 135.243(a)(1), or 91.1053(a)(2)(i) operations until I turn 23 and log 1,500 total hours with 500 cross-country hours.
This response cites the exact regulations (14 CFR 61.159(a)(3), 61.160(b), and 61.167), distinguishes between actual airplane time and approved full flight simulator credit, and states both certificate limitations clearly.
Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview
Frequently asked questions
How many multiengine hours are required for an ATP multiengine certificate?
Under 14 CFR 61.159(a)(3), you need at least 50 hours of flight time in multiengine airplanes. You may credit up to 25 hours of training in a full flight simulator representing a multiengine airplane if completed in an approved Part 121, 135, 141, or 142 training course, which means at least 25 hours must be flown in an actual multiengine airplane.
Is the ATP CTP required before taking the ATP multiengine knowledge test?
Yes. Under 14 CFR 61.153(e) and 61.156, you must present a graduation certificate from an authorized Part 121, 135, 141, or 142 training provider showing you completed the 30 hours of academic instruction and 10 hours of FSTD training before applying for the ATP multiengine knowledge test.
How long is the ATP multiengine (ATM) knowledge test valid?
Under FAA Notice N 8900.225 and the 2013 Pilot Certification Final Rule (78 FR 42324), an ATP multiengine knowledge test passed after completing the ATP CTP is valid for 60 calendar months (5 years). Pilots employed by Part 121, 125, or 135 certificate holders may also use an expired knowledge test if they have completed the ATP CTP and the operator's approved initial or PIC training program.
Can I get a Restricted ATP (R-ATP) for a single-engine airplane?
No. A restricted privileges ATP certificate is issued only for an airplane category multiengine class rating or concurrently with a multiengine airplane type rating.
How do I remove the restricted privileges limitation from my R-ATP?
Under 14 CFR 61.160(g), the 'Restricted in accordance with 14 CFR 61.167' limitation is removed when you present satisfactory evidence that you are at least 23 years old and have met all unrestricted aeronautical experience requirements of 14 CFR 61.159, including 1,500 hours of total pilot time and 500 hours of cross-country time.
What is required to upgrade a single-engine ATP to a multiengine ATP?
Under 14 CFR 61.165(f), a pilot who holds a single-engine airplane ATP must complete the ATP CTP (14 CFR 61.156), pass the multiengine ATP knowledge test, meet the aeronautical experience requirements of 14 CFR 61.159 (including 50 hours of multiengine class time), and pass the practical test on the multiengine areas of operation.
Sources
- eCFR: 14 CFR Part 61 Subpart G, Airline Transport Pilots
- eCFR: 14 CFR 61.156, Training Requirements: Airplane Category Multiengine Class
- eCFR: 14 CFR 61.159, Aeronautical Experience: Airplane Category Rating
- eCFR: 14 CFR 61.160, Aeronautical Experience: Airplane Category Restricted Privileges
- Federal Register: Pilot Certification and Qualification Requirements for Air Carrier Operations (78 FR 42324)
- GovInfo: 14 CFR 61.156 and 61.157 Official Edition
- FAA Advisory Circular 61-138: Airline Transport Pilot Certification Training Program
- FAA Notice N 8900.225: Pilot Certification and Qualification Requirements for Air Carrier Operations