Berry Aviation Careers Preparation Guide: FAA Part 135 Minimums, Special Mission Rules, and Interview Plan
Short answer: Pilots and aviation specialists pursuing Berry Aviation careers or similar Part 135 special mission and on-demand cargo roles must meet Federal Aviation Administration qualification baselines in Title 14 of the Code of Federal Regulations (14 CFR) Part 135. Under 14 CFR 135.243(c), serving as Pilot in Command under Instrument Flight Rules requires at least 1,200 hours of pilot flight time, while two-pilot Eligible On-Demand Captains under 14 CFR 135.4 need at least 1,500 hours. Confirm live job openings and role-specific requirements on the carrier's official careers portal, then prepare your logbooks, Pilot Records Improvement Act files, and operational stories around these federal rules.
How FAA Part 135 Shapes Special Mission and Cargo Careers
If your career goal is landing a flight, maintenance, or operations role through Berry Aviation careers or a comparable Bristow Special Mission track, your preparation starts with Federal Aviation Administration air carrier rules. Unscheduled cargo charters, defense mobility flights, and medical transport operations run under 14 CFR Part 135, displayed up to date as of November 10, 2026 in the Electronic Code of Federal Regulations. While each operator sets its own fleet minimums, duty schedules, and hiring steps on its official job portal, federal rules establish the legal baseline for every safety-sensitive position.
FAA Become a Pilot guidance (last updated July 9, 2024) explains that pilot certification rules differ by aircraft category across airplanes, helicopters, gyroplanes, gliders, balloons, and airships, whereas ultralight vehicles require no pilot license. Airman certificates span from Student, Sport, Recreational, and Private Pilot tiers up to Airline Transport Pilot (ATP), paired with FAA medical certification, air carrier training, and Part 142 training centers.
Inside a certificated 14 CFR Part 135 operation, federal regulations divide operational and technical personnel into distinct qualification tracks under 14 CFR 135.1 and Subparts B, E, H, J, K, and L. Identifying where your certificates fit helps you target the right job requisitions and organize your records before applying.
- Part 135 Line Pilots, Flight Instructors, and Check Pilots: Flight crewmembers meet certificate and hour baselines in Subpart E (14 CFR 135.241 through 135.247), while company flight instructors qualify under 14 CFR 135.338 and check pilots qualify under 14 CFR 135.337 to conduct proficiency and line checks.
- Operational Control and Flight Locating Specialists: Designated personnel authorized under 14 CFR 135.77 exercise operational control over flight releases, weather tracking, and flight locating procedures required under 14 CFR 135.79 when FAA flight plans are not filed.
- Certificated Maintenance and Required Inspection Personnel: Maintenance, preventive maintenance, and alteration personnel work under Subpart J (14 CFR 135.411 through 135.443), which covers required inspection personnel (14 CFR 135.429), certificate requirements (14 CFR 135.435), and airworthiness release or aircraft maintenance log entries (14 CFR 135.443).
- Cargo Handling and Hazardous Materials Personnel: Crewmembers and ground staff who accept, reject, handle, store, package, or load freight or company material train under 14 CFR 135.23(p) and Subpart K (14 CFR 135.501 through 135.507) to comply with 49 CFR Parts 171 through 180.
- Air Ambulance and Medical Transport Teams: Rotorcraft air ambulance operations follow enhanced weather, risk analysis, operations control center, and medical personnel briefing standards in Subpart L (14 CFR 135.601 through 135.621).
FAA Part 135 Pilot Minimums, ATP Triggers, and Crew Pairing
Pilots targeting Berry Aviation careers or other Part 135 special mission cockpits are screened first against federal qualification floors in 14 CFR 135.243 and 14 CFR 135.4. Under 14 CFR 135.243(b), acting as Pilot in Command (PIC) under Visual Flight Rules (VFR) requires at least a Commercial Pilot Certificate with appropriate category, class, and required type ratings, an airplane instrument rating (or ATP with an airplane category rating), and at least 500 hours of pilot time. That 500-hour floor must include at least 100 hours of cross-country flight time, with at least 25 hours flown at night. A narrow exception in 14 CFR 135.243(d) waives the airplane instrument rating only for isolated-area day VFR flights in single reciprocating-engine airplanes within 250 nautical miles of base under ceilings of at least 1,000 feet and visibility of at least 3 statute miles.
Instrument Flight Rules (IFR) operations raise the bar substantially. Under 14 CFR 135.243(c), no pilot may serve as PIC of an aircraft under IFR without holding at least a Commercial Pilot Certificate with appropriate category, class, and required type ratings, an instrument rating or ATP certificate, and at least 1,200 hours of pilot flight time. Those 1,200 hours must include at least 500 hours of cross-country time, 100 hours of night time, and 75 hours of actual or simulated instrument time, with at least 50 instrument hours logged in actual flight. Under 14 CFR 135.243(a)(1), passenger-carrying operations in turbojet airplanes, airplanes with a passenger-seat configuration of 10 seats or more excluding crewmember seats, or multiengine airplanes in commuter operations require an ATP certificate with category, class, and applicable type ratings.
Two-pilot charter crews operating under Eligible On-Demand rules in 14 CFR 135.4 follow specific Captain, Second in Command (SIC), and crew-pairing standards. An Eligible On-Demand flight crew must consist of at least two qualified pilots employed or contracted by the certificate holder, with a minimum of 500 total flight hours for the SIC and 1,500 total flight hours for the PIC. For multiengine turbine-powered fixed-wing and powered-lift aircraft, the PIC must hold an ATP certificate and applicable type ratings, while the SIC must hold Commercial Pilot and instrument ratings.
Crew experience in specific aircraft types also governs who flies challenging approaches. Under 14 CFR 135.4(a)(4), either the PIC or the SIC must have logged at least 75 hours in that aircraft make and model, and in that type if a type rating is required. Additional operating limits apply under 14 CFR 135.4(a)(3) whenever a fixed-wing SIC has fewer than 100 hours as SIC in make and model and the PIC is not a qualified check pilot. In that pairing, the PIC must make all takeoffs and landings when a Destination Airport Analysis is required under 14 CFR 135.385(f), when prevailing visibility is at or below 3/4 mile, when runway visual range is at or below 4,000 feet, when runways carry water, snow, slush, or ice, when braking action is reported as less than good, when crosswinds exceed 15 knots, or when windshear is reported.
FAA Part 135 Fixed-Wing Pilot Qualification Baselines (14 CFR 135.243 and 14 CFR 135.4, current as of November 2026 )
| Part 135 Crew Role | Minimum FAA Certificates | Total Pilot Hours | Key Sub-Hours and Operating Limits |
|---|---|---|---|
| Eligible On-Demand SIC (14 CFR 135.4(a)(2)) | Commercial Pilot and Instrument Rating | 500 hours | PIC performs takeoffs and landings in crosswinds above 15 knots, RVR at or below 4,000 feet, or contaminated runways until SIC logs 100 hours in make and model |
| VFR Pilot in Command (14 CFR 135.243(b)) | Commercial Pilot, Instrument Rating, and required Type Rating | 500 hours | Includes at least 100 hours cross-country flight time, with at least 25 hours at night |
| IFR Pilot in Command (14 CFR 135.243(c)) | Commercial Pilot, Instrument Rating or ATP, and required Type Rating | 1,200 hours | Includes 500 hours cross-country, 100 hours night, and 75 hours instrument time (at least 50 hours in actual flight) |
| Passenger Turbojet, 10-Plus Seat, or Commuter PIC (14 CFR 135.243(a)(1)) | Airline Transport Pilot with category, class, and required Type Rating | ATP regulatory minimums | Applies to passenger-carrying turbojets, airplanes with 10 or more passenger seats excluding crew seats, and multiengine commuter operations |
| Eligible On-Demand PIC (14 CFR 135.4(a)(2)) | ATP and Type Rating for multiengine turbine fixed-wing (Commercial and Instrument for other aircraft types ) | 1,500 hours | Requires a two-pilot crew, and either PIC or SIC must hold at least 75 hours in aircraft make and model |
Defense Evaluations, International Rules, and DOI Pilot Carding
Candidates pursuing special mission aviation paths such as Berry Aviation careers often prepare for military airlift, overseas deployments, or federal civilian agency contracts. Each mission profile adds federal compliance checks on top of domestic Part 135 rules. When an air carrier operates on U.S. Department of Defense contracts, 14 CFR 135.76 requires the PIC to give any credentialed DOD Commercial Air Carrier Evaluator free and uninterrupted access to the cockpit and forward observer's seat during official evaluations. That obligation runs alongside FAA aviation safety inspector cockpit access rules in 14 CFR 135.75.
Crews flying Outside the Continental United States must follow 14 CFR 135.3(a)(2). While operating outside the United States, every Part 135 pilot must comply with Annex 2 (Rules of the Air) to the Convention on International Civil Aviation or the regulations of the foreign country flown over, plus any more restrictive rules in 14 CFR Parts 61, 91, and 135 that can be met without violating foreign rules. Under 14 CFR 135.43, international crewmember certificates issued under Annex 9 to facilitate entry and clearance into International Civil Aviation Organization contracting states must be surrendered to the responsible Flight Standards office for cancellation when the crewmember's employment with that carrier ends.
Federal civilian resource and transport contracts use separate interagency pilot qualification checks. As detailed in a November 22, 2024 U.S. District Court for the District of Idaho decision published on GovInfo, federal agencies award contracts only to responsible contractors under 48 CFR 9.402, and FAA-certificated vendor pilots flying U.S. Department of the Interior (DOI) missions must meet agency standards and pass an evaluation check ride to receive a pilot authorization, commonly called a pilot card. Under DOI Office of Aviation Services (OAS) Operational Procedures Memorandum 24 (OPM-24, effective January 1, 2023 and updated November 10, 2022), pilots apply via the Interagency Airplane Pilot Evaluation Application (Form OAS-64A) and must report all OAS and U.S. Forest Service pilot card denials, suspensions, or revocations from the past 5 years. When a mishap or qualification review occurs, OAS may convene a three-member Pilot Review Board (two DOI pilots and one air safety investigator) to evaluate qualification, disqualification, or reinstatement, and Department Manual 351 DM 3 sets a 30-calendar-day window from receipt of a carding decision to request reconsideration.
Part 135 Training Curricula, Checking Cycles, and Maintenance Rules
Understanding how Part 135 training and checking work helps you speak clearly in technical interviews about onboarding and currency. Under 14 CFR Part 135 Subpart H, operators run FAA-approved initial, transition, upgrade, and differences ground and flight training (14 CFR 135.345 and 135.347), recurrent training (14 CFR 135.351), Crew Resource Management training (14 CFR 135.330), crewmember emergency evacuation drills (14 CFR 135.331), and hazardous materials recognition and handling training (Subpart K). Operators conducting commuter flights with two-pilot type-certificated airplanes under 14 CFR 135.3(b), or authorized operators under 14 CFR 135.3(c), train under 14 CFR Part 121 Subparts N and O, including upgrade leadership, command, and mentoring instruction for crews of two or more pilots under 14 CFR 135.3(d).
Active Part 135 pilots stay current through recurring check events under Subpart G. Every pilot completes initial and recurrent written or oral tests and flight competency checks under 14 CFR 135.293. Pilots in command under IFR pass recurring instrument proficiency checks under 14 CFR 135.297 and route and airport line checks under 14 CFR 135.299, administered by FAA inspectors or designated company check pilots qualified under 14 CFR 135.337.
On the hangar floor, Part 135 Subpart J holds certificate holders responsible for continuous airworthiness under 14 CFR 135.413. Multiengine airplanes certificated with nine or fewer passenger seats undergo aging airplane inspections and records reviews under 14 CFR 135.422, while larger or complex fleets operate under Approved Aircraft Inspection Programs (14 CFR 135.419) and Continuing Analysis and Surveillance programs (14 CFR 135.431). Subpart J also covers required inspection personnel under 14 CFR 135.429, certificate requirements under 14 CFR 135.435, and airworthiness release or aircraft maintenance log entries under 14 CFR 135.443.
Six-Step Preparation and PRIA Checklist Before You Apply
Whether you are applying for Berry Aviation careers or another Part 135 special mission operator, clean licensing, flight-time, and employment records prevent avoidable delays during background screening. Complete this six-step preparation checklist written by our team before submitting an application on any carrier's official portal.
- Step 1, Audit your FAA certificates and medical currency: Confirm your aircraft category, class, instrument, and Commercial or ATP ratings under FAA Become a Pilot guidance and 14 CFR 135.243, and verify that your medical certificate class matches PIC or SIC duties.
- Step 2, Reconcile your 12-month 14 CFR 135.63 pilot record items: Under 14 CFR 135.63(a)(4) and (b), Part 135 certificate holders maintain aircraft lists for at least 6 months and individual pilot records for at least 12 months. Verify your certificate numbers, medical effective date, detailed aeronautical experience, competency and proficiency check dates and outcomes, flight time totals for Subpart F rest and duty compliance, check pilot letters, and initial or recurrent training dates.
- Step 3, Prepare Pilot Records Improvement Act (PRIA) and drug-testing contacts: Air carrier hiring incorporates PRIA records and Pilot's Bill of Rights disclosures noted in FAA pilot guidance, along with Department of Transportation drug and alcohol testing compliance referenced in 14 CFR 135.1 and 14 CFR Part 120 (sections 120.31 through 120.39). List accurate human resources contacts for every prior aviation employer.
- Step 4, Organize interagency carding and international crew files: If you have flown federal resource contracts, compile your Form OAS-64A flight breakdown and confirm whether you have any OAS or U.S. Forest Service card actions within the past 5 years to disclose. Confirm any prior international crewmember certificates under 14 CFR 135.43 were properly surrendered at job separation.
- Step 5, Check live job requisitions on the carrier's official site: Visit the target employer's official careers page directly to verify active openings, turbine or make-and-model hour prerequisites, security clearance expectations, deployment schedules, and contact details for disability accommodations.
- Step 6, Practice telling your own operational stories out loud: Rehearse real examples from your flying or maintenance background rather than scripted answers, focusing on weather diversions, contaminated-runway calculations, crew pairing limits, and maintenance write-ups.
Operational Control, Load Manifests, and Manual Topics for Interviews
Part 135 technical and scenario interviews test how you make safe decisions at unscheduled outstations where crews work directly with operations control and field maintenance. Expect questions on company manual discipline under 14 CFR 135.21 and 135.23. Every Part 135 operator using more than one pilot maintains an English-language operations manual showing the last revision date on every paper page, or in an immediately ascertainable spot electronically, and crewmembers must keep their issued sections current and accessible on duty.
Review preflight airworthiness, weight-and-balance, and emergency deviation rules so you can cite exact cockpit steps. Under 14 CFR 135.23(e) through (i) and 14 CFR 135.65, the PIC confirms required airworthiness inspections are complete, records mechanical irregularities before, during, and after flight, checks that prior defects were repaired or properly deferred, and follows Minimum Equipment List or inoperative-equipment release procedures under 14 CFR 135.179. Before every multiengine takeoff, 14 CFR 135.63(c) requires preparing a duplicate load manifest listing the passenger count, total loaded weight, maximum allowable takeoff weight, center of gravity limits, and loaded center of gravity or approved loading-schedule entry, backed by current empty-weight data under 14 CFR 135.185.
Interview panels also ask how you handle inflight abnormals when rules and immediate safety collide. Under 14 CFR 135.19(b), in an emergency involving the safety of persons or property, the PIC may deviate from Part 135 rules to the extent required to meet that emergency. Under 14 CFR 135.19(c), anyone exercising emergency deviation authority must send a complete report of the aircraft operation, a description of the deviation, and the reasons for it to the responsible Flight Standards office within 10 days, excluding Saturdays, Sundays, and federal holidays.
Fourstripe is not affiliated with any airline.
Practice example
Tell me about a time on an unscheduled charter or mission flight when changing weather or runway conditions forced you to delay, divert, or take control of the landing.
Example answer, written by us. It is not a real applicant's story. Last winter I was flying as Pilot in Command of a two-pilot turboprop cargo charter into a regional strip after a cold front passed. Twenty minutes before top of descent, updated weather reported wet snow on the runway, braking action fair, and a 17-knot crosswind. My Second in Command had 65 hours in make and model. Under our Part 135 manual and 14 CFR 135.4(a)(3) rules, crosswinds above 15 knots, braking action less than good, or contaminated runways required me to make the landing. Before briefing the approach, I ran a fresh landing distance check with snow margins and saw we were within 200 feet of our company limit. Instead of pressing into a deteriorating strip at night, I coordinated with operational control to divert to our planned alternate 35 miles south with a bare, dry runway. Cargo arrived 50 minutes late by ground courier, and the aircraft stayed safely inside performance margins.
This answer applies exact 14 CFR 135.4(a)(3) crew pairing and runway contamination limits inside a concrete cockpit decision sequence. It shows the panel how you verify landing performance margins, coordinate early with operational control, and protect safety on an unscheduled cargo flight.
Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview
Frequently asked questions
What flight hours do I need when preparing for Berry Aviation careers or Part 135 pilot jobs?
Under federal Part 135 baselines in 14 CFR 135.243, serving as Pilot in Command requires at least 500 pilot hours for standard VFR operations and at least 1,200 hours (including 500 cross-country, 100 night, and 75 instrument hours) for IFR operations. Two-pilot Eligible On-Demand crews under 14 CFR 135.4 require at least 500 hours for Second in Command and 1,500 hours with an ATP certificate and type rating for multiengine turbine fixed-wing Captains. Check the employer's official job listings to confirm aircraft-specific hour or type rating prerequisites above these FAA floors.
Do Part 135 cargo and special mission pilots need an Airline Transport Pilot certificate?
Under 14 CFR 135.243(a)(1), an ATP certificate is required for passenger-carrying flights in turbojet airplanes, airplanes configured with 10 or more passenger seats excluding crewmember seats, and multiengine commuter operations. An ATP and applicable type rating are also required under 14 CFR 135.4(a)(2) for multiengine turbine fixed-wing Captains in Eligible On-Demand two-pilot operations, while other Part 135 flights allow a Commercial Pilot Certificate with instrument and applicable type ratings unless an operator sets higher minimums.
What is a DOI pilot card for federal contract and special mission pilots?
As documented in a November 22, 2024 federal court decision on GovInfo, FAA-certificated vendor pilots flying U.S. Department of the Interior missions must meet agency qualification standards and pass an evaluation check ride to receive a pilot authorization, known as a pilot card. Under Office of Aviation Services Operational Procedures Memorandum 24 (effective January 1, 2023), pilots apply via Form OAS-64A and must disclose any OAS or U.S. Forest Service card denials, suspensions, or revocations from the past 5 years.
What pilot records and drug tests are required in Part 135 hiring?
Air carrier pilot hiring involves Pilot Records Improvement Act of 1996 (PRIA) background checks and FAA medical verification, alongside Department of Transportation drug and alcohol testing requirements referenced in 14 CFR 135.1 and 14 CFR Part 120. Once onboarded, 14 CFR 135.63(a)(4) and (b) require the operator to keep at least 12 months of individual pilot files recording certificates, medical class, competency and proficiency check results, flight time totals, and any prior release for physical or professional disqualification.
Where should I confirm current openings and hiring steps for Berry Aviation careers?
Candidates interested in Berry Aviation careers should confirm open positions, fleet type ratings, deployment schedules, and accommodation contacts directly on the company's official careers page. Having your FAA certificates, 14 CFR 135.243 flight-time totals, and PRIA employer records organized beforehand helps you submit an accurate application.