Breeze Airways Pilot Qualifications and Part 121 Interview Prep

Short answer: To fly as a Breeze Airways pilot or at any U.S. Part 121 scheduled carrier, you must hold an Airline Transport Pilot (ATP) certificate with an appropriate aircraft type rating under 14 CFR 121.436. An unrestricted multiengine ATP requires at least 1,500 total flight hours and a minimum age of 23 under 14 CFR 61.153 and 61.159, while Restricted Privileges ATP (R-ATP) pathways allow qualifying pilots to begin as a first officer at age 21 with 750, 1,000, or 1,250 hours under 14 CFR 61.160.

Part 121 Pilot Certification Rules for Breeze Airways Candidates

For aspiring Breeze Airways pilots, the first hurdle is meeting the Federal Aviation Administration baseline for scheduled air carriers. Under 14 CFR 121.436, no certificate holder may use a pilot as second in command (first officer) or pilot in command (captain) unless that pilot holds an Airline Transport Pilot certificate and an appropriate aircraft type rating for the airplane being flown. A second-in-command type rating obtained under 14 CFR 61.55 does not satisfy Part 121 requirements.

Before taking the multiengine ATP knowledge test, every applicant must complete an Airline Transport Pilot Certification Training Program (ATP CTP) and present a graduation certificate under 14 CFR 61.153(e). If you are hired by a Part 121 carrier before holding the specific aircraft type rating, 14 CFR 61.157(f) allows your completion of the air carrier's approved proficiency check under 14 CFR 121.441 to satisfy the flight proficiency requirements for issuing your ATP certificate and type rating concurrently.

Medical certification rules depend on your seat position. Under the FAA Pilot Certification and Qualification Requirements for Air Carrier Operations final rule (78 FR 42324), pilots exercising pilot-in-command privileges must hold a first-class medical certificate, while second-in-command pilots in standard two-pilot Part 121 operations are required by regulation to hold at least a second-class medical certificate.

Part 121 Pilot Qualification Summary (14 CFR 61.153, 61.159, 61.160, and 121.436)

Qualification Area First Officer (R-ATP) First Officer (Unrestricted ATP) Captain (Part 121 PIC)
Minimum Age 21 years old 23 years old 23 years old
Pilot Certificate ATP with restricted privileges Unrestricted ATP Unrestricted ATP
Aircraft Type Rating Required for aircraft flown Required for aircraft flown Required for aircraft flown
Total Pilot Flight Time 750, 1,000, or 1,250 hours (by pathway) 1,500 hours 1,500 hours
Part 121 / Qualifying Air Carrier Experience Not required for initial entry Not required for initial entry 1,000 hours in qualifying operations
Minimum FAA Medical Certificate Second-class (two-pilot crew) Second-class (two-pilot crew) First-class

Unrestricted ATP Flight Hour Requirements (14 CFR 61.159)

When you prepare your logbooks for a Part 121 interview, auditors verify every sub-requirement of 14 CFR 61.159(a). To qualify for an unrestricted ATP certificate with an airplane category and class rating, you must log at least 1,500 hours of total time as a pilot. Within those 1,500 hours, your logbook must show specific aeronautical experience minimums.

You may credit certain simulator and training device hours toward these totals, provided the training was completed as part of an approved training course under 14 CFR Part 121, 135, 141, or 142. Up to 100 hours of your 1,500 total hours may be obtained in a full flight simulator (FFS) or flight training device (FTD) representing an airplane under 14 CFR 61.159(a)(6).

  • 500 hours of cross-country flight time.
  • 100 hours of night flight time. If you have logged at least 20 night takeoffs and landings to a full stop, you may substitute each additional night takeoff and landing to a full stop for 1 hour of night flight time, up to 25 hours credited under 14 CFR 61.159(b).
  • 50 hours of flight time in the class of airplane for the rating sought (multiengine land). A maximum of 25 hours of training in a full flight simulator representing a multiengine airplane may be credited if completed in an approved Part 121, 135, 141, or 142 course. An FTD or aviation training device cannot be used for this 25-hour credit.
  • 75 hours of instrument flight time in actual or simulated instrument conditions. You may credit up to 25 hours of simulated instrument time in an FFS or FTD, or up to 50 hours if the training was accomplished in a course conducted by a Part 142 certificated training center.
  • 250 hours of flight time in an airplane as pilot in command (PIC), or as second in command (SIC) performing the duties of PIC under the supervision of a PIC, or any combination thereof. This 250-hour block must include at least 100 hours of cross-country time and 25 hours of night flight time.

Restricted Privileges ATP (R-ATP) Pathways (14 CFR 61.160)

You do not need 1,500 hours to sit in the right seat of a Part 121 airliner if you qualify for a Restricted Privileges ATP under 14 CFR 61.160. An R-ATP allows a pilot who is at least 21 years old to serve as second in command in Part 121 domestic, flag, and supplemental operations that do not require three or more pilots under 14 CFR 61.167(b).

Every R-ATP applicant under the reduced-hour pathways must meet all the specific night, instrument, multiengine class, and 250-hour PIC experience rules of 14 CFR 61.159, except that the cross-country requirement is reduced from 500 hours to 200 hours under 14 CFR 61.160(e). In addition, pilots who have reached 1,500 total hours and at least 200 hours of cross-country time (or who are between ages 21 and 23 with 1,500 hours) may also obtain an R-ATP under 14 CFR 61.160(f).

R-ATP Total Time and Cross-Country Minimums under 14 CFR 61.160

Qualifying Pathway Minimum Total Time Minimum Cross-Country Time Required Academic Credits or Military Proof
U.S. Military Pilot 750 hours 200 hours DD-214 showing honorable discharge (or active service record) plus undergraduate pilot training graduation record
Bachelor's Degree with Aviation Major 1,000 hours 200 hours 60 semester credit hours of FAA-recognized aviation coursework plus Part 141 commercial and instrument training
Associate's Degree with Aviation Major (or Bachelor's with 30 to 59 credits) 1,250 hours 200 hours At least 30 semester credit hours of FAA-recognized aviation coursework plus Part 141 commercial and instrument training
1,500-Hour R-ATP (Reduced Cross-Country or Age 21 to 22) 1,500 hours 200 hours No degree or military requirement. Meets all other 14 CFR 61.159 thresholds.

Captain (PIC) Upgrade Experience Rules (14 CFR 121.436)

Interview panels often ask where you see yourself in three to five years, which brings up upgrading to captain. Under 14 CFR 121.436(a), serving as pilot in command in Part 121 operations requires an unrestricted ATP certificate (not subject to 14 CFR 61.167 limitations), an appropriate aircraft type rating, and at least 1,000 hours of specific air carrier or commercial operating experience.

You cannot count general aviation flight instruction or Part 135 VFR single-engine time toward this 1,000-hour upgrade threshold. Under 14 CFR 121.436(a)(3) and (c), the 1,000 hours must come from specific qualifying operations.

  • Hours flown as second in command in Part 121 operations.
  • Hours flown as pilot in command in fractional ownership operations under 14 CFR 91.1053(a)(2)(i) (multiengine turbojet or airplanes requiring two pilots).
  • Hours flown as pilot in command in eligible on-demand operations that require the pilot to satisfy 14 CFR 135.4(a)(2)(ii)(A).
  • Military flight time credit: Up to 500 hours of military flight time may be credited toward the 1,000-hour requirement if obtained as pilot in command in a multiengine, turbine-powered, fixed-wing airplane or powered-lift aircraft in an operation requiring more than one pilot.

ATP Certification Training Program (ATP CTP) Breakdown

Under 14 CFR 61.156, any pilot applying for the knowledge test for an ATP certificate with an airplane category multiengine class rating must present a graduation certificate from an authorized training provider under Part 121, 135, 141, or 142. This course bridges the knowledge gap between light piston training and operating transport-category turbine aircraft in a crew environment.

The ATP CTP consists of 40 total hours of mandatory instruction split into 30 hours of academic classroom training and 10 hours of training in a flight simulation training device (FSTD). By our calculation from 14 CFR 61.156(a) and (b), 75 percent of the curriculum is classroom instruction and 25 percent is simulator training, with air carrier operations making up the largest academic block at 14 of the 30 classroom hours (46.7 percent). Because technical interview questions frequently test the exact topics taught in your ATP CTP course, reviewing your ATP CTP syllabus before an interview is one of the highest-return preparation steps you can take.

  • 8 hours minimum on aerodynamics, including high-altitude operations.
  • 2 hours minimum on meteorology, including adverse weather phenomena and weather detection systems.
  • 14 hours minimum on air carrier operations, covering physiology, communications, checklist philosophy, operational control, minimum equipment list (MEL) and configuration deviation list (CDL), ground operations, turbine engines, transport-category aircraft performance, and automation, navigation, and flight path warning systems.
  • 6 hours minimum on leadership, professional development, crew resource management (CRM), and safety culture.
  • 6 hours minimum of FSTD training in a Level C or higher full flight simulator qualified under Part 60 that represents a multiengine turbine airplane with a maximum takeoff weight of 40,000 pounds or greater. This session covers low-energy states and stalls, upset recovery techniques, and adverse weather conditions including icing, thunderstorms, and crosswinds with gusts.
  • 4 hours remaining FSTD training in a Level 4 or higher flight simulation training device covering navigation (including flight management systems) and automation (including autoflight).

Pilot Records Database (PRD) Screening and Background Checks

Every Part 121 carrier must evaluate your background in the FAA Pilot Records Database before you can begin service as a pilot under 14 CFR 111.105. Under 14 CFR 111.5, the legacy Pilot Records Improvement Act (PRIA) ceased to be effective on September 9, 2024, making the electronic PRD the mandatory system for air carrier background checks.

To register for the PRD pilot user portal on prd.faa.gov, you must hold a Commercial, ATP, or Remote pilot certificate and a valid FAA medical certificate. Starting mid-November 2026, the FAA automatically disables PRD user accounts after 365 days of inactivity, so you must log in at least once a year to keep your account active. Under 14 CFR 111.305(c), you must submit your electronic access application at least 7 days before you need to access the database.

Before an airline can view your file, you must grant written consent in the PRD and affirm that your employment history for the preceding 5 years is accurate and complete under 14 CFR 111.310. You must also provide separate written consent for a National Driver Register (NDR) motor vehicle driving record search under 14 CFR 111.110. Under 14 CFR 111.120(c), if you submit written consent for an NDR check, you have the right to request a copy of any State motor vehicle driving records the carrier obtained, and the carrier must provide them within 30 days. Note that reports submitted under an FAA-approved Voluntary Safety Reporting Program (such as ASAP) are protected under Part 193 and are strictly prohibited from being entered into the PRD under 14 CFR 111.245.

  • FAA records under 14 CFR 111.135: Current pilot and medical certificates, type ratings, limitations, any failed attempt to pass a practical test (checkride) for a certificate or rating under Part 61, unoverturned FAA enforcement actions, aviation accidents or incidents while acting as PIC or SIC, and DOT drug and alcohol testing violations (verified positive drug tests, alcohol results of 0.04 or greater, or refusals to test).
  • Previous employer records under 14 CFR 111.220 to 111.235: Training, qualification, and proficiency event results (satisfactory or unsatisfactory) including check pilot comments and specific unsatisfactory maneuvers, final disciplinary actions related to pilot performance that were not overturned, and final separation from employment records.
  • Historical PRIA records under 14 CFR 111.255: Air carriers operating under Part 121 or 135 were required to upload historical records dating back to August 1, 2005.

What Happens After You Are Hired: Part 121 Training and Part 117 Duty Rules

Understanding federal duty and rest rules helps you answer operational scenario questions during an interview.

Your line schedule will follow 14 CFR Part 117 flight and duty limits. Interview panels often present scheduling scenarios to test whether you know your rest requirements and can make conservative fitness-for-duty calls.

  • Rest before duty (14 CFR 117.25): You must receive at least 10 consecutive hours of rest immediately before any reserve or flight duty period, which must provide an 8-hour uninterrupted sleep opportunity. You must also receive at least 30 consecutive hours free from all duty within the past 168 consecutive hours.
  • Unaugmented flight time limits (14 CFR 117.11 and Table A): Maximum scheduled flight time for a two-pilot crew is 9 hours when reporting between 0500 and 1959 acclimated local time, and 8 hours when reporting between 0000 to 0459 or 2000 to 2359.
  • Cumulative flight time limits (14 CFR 117.23): You may not exceed 100 hours of flight time in any 672 consecutive hours (28 days) or 1,000 hours in any 365 consecutive calendar days.
  • Cumulative Flight Duty Period (FDP) limits (14 CFR 117.23): You may not exceed 60 FDP hours in any 168 consecutive hours or 190 FDP hours in any 672 consecutive hours.
  • Short-call reserve (14 CFR 117.21): A reserve availability period (RAP) may not exceed 14 hours.

Pre-Interview Preparation Checklist for Breeze Airways Candidates

Our team built this step-by-step preparation checklist to help you organize your records, verify your regulatory compliance, and practice your behavioral and technical responses before a Part 121 interview.

Structure your behavioral answers using the Situation, Task, Action, Result, and Reflection format. When an interviewer asks tell me about a time you faced a disagreement, made an error, or resolved an abnormal flight condition, describe the circumstances briefly. Spend most of your time on your personal actions, your communication with the crew, and the safety outcome. Finish by explaining what you learned and how that experience shapes your daily flight deck habits today.

Prepare for both technical and human resources panel questions with dedicated study routines. For technical panels, review high-altitude aerodynamics, transport-category aircraft systems, adverse weather procedures, and airspace rules from your ATP CTP syllabus. For human resources panels, reflect on your interpersonal skills, how you support captains, and how you deliver professional service to passengers without compromising safety.

Walk through your logbooks methodically before you meet the interviewers. Tab every checkride, type rating, flight review, and milestone flight with clear labels. Ensure your column totals match your electronic logbook audit and align with 14 CFR 61.159 experience categories. Be ready to explain every entry, and present any checkride failure openly and calmly without making excuses.

Work through each item at least two weeks before submitting applications or sitting for a panel interview so that logbook discrepancies or PRD account delays never catch you off guard.

  • Log into prd.faa.gov to verify your account is active and review your FAA certificate, medical, and practical test records for accuracy.
  • Update and affirm your 5-year pilot employment history inside the PRD under 14 CFR 111.310(b), ensuring every Part 121, 135, 91K, or corporate operator date matches your resume and logbooks.
  • Audit your logbooks against 14 CFR 61.159 or 61.160: verify your 50 hours of multiengine class time (confirming no more than 25 hours come from an approved course FFS), 75 hours of instrument time, 100 hours of night time, and 250 hours of airplane PIC time (with 100 PIC cross-country and 25 PIC night hours).
  • Gather your R-ATP documentation if applying under 1,500 hours: locate your official university transcript and FAA certifying statement showing 30 or 60 credit hours of recognized coursework and Part 141 commercial/instrument completion, or your military DD-214 and pilot graduation records.
  • Prepare a straightforward, accountable explanation for any checkride failure, training unsat, or Evaluator comment listed in your PRD under 14 CFR 111.135(b) and 111.225(c)(7). State what happened, what root cause you identified without blaming the examiner or weather, and how you changed your preparation habits afterward.
  • Practice speaking your behavioral (Tell me about a time) and technical ATP CTP stories out loud, focusing on crew resource management, checklist discipline, high-altitude aerodynamics, and Part 117 fitness-for-duty decisions.

Practice example

As we review your Pilot Records Database file, tell me about a time you failed a practical test or had an unsatisfactory training event, or a time you fell behind the aircraft during training, and what you changed afterward.

Example answer written by our team. The applicant is invented. When I took my initial Commercial Multiengine add-on practical test under Part 61, I received a notice of disapproval on the single-engine instrument approach task. Everything went smoothly through the Vmc demonstration, but when the examiner gave me a simulated engine failure prior to the final approach fix, I rushed the single-engine checklist while trying to hand-fly the localizer course. Because I tried to do both tasks simultaneously without trimming the rudder first, I drifted more than a quarter-scale deflection before configuring for the descent. I owned that mistake completely. During my retraining flights, my instructor and I broke the workload into strict phases: fly and trim the airplane first, verify the feathering items deliberately, and brief the approach before reaching the fix. Since that day, I have applied the checklist and automation discipline we covered in my ATP CTP course on every flight, slowing down my cadence whenever an abnormal event occurs.

Because every Part 61 practical test failure appears in the FAA Pilot Records Database under 14 CFR 111.135(b), this answer names the exact task without making excuses or blaming the examiner. It connects the lesson learned directly to Part 121 checklist discipline and workload management.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

Can I fly as a first officer at a Part 121 airline like Breeze Airways with only a commercial pilot certificate?

No. Under 14 CFR 121.436(b), every second-in-command pilot in Part 121 operations must hold an Airline Transport Pilot certificate (either unrestricted or with restricted privileges under 14 CFR 61.160) and an appropriate aircraft type rating for the aircraft being flown.

What are the flight hour minimums for a Restricted ATP (R-ATP)?

Under 14 CFR 61.160, qualified U.S. military pilots need 750 total hours, graduates of an authorized four-year aviation bachelor's program with 60 aviation credits need 1,000 hours, and graduates of an authorized two-year associate's program with 30 aviation credits need 1,250 hours. All R-ATP pathways require a minimum age of 21 and at least 200 hours of cross-country time alongside the night, instrument, multiengine, and PIC requirements of 14 CFR 61.159.

How many hours of simulator time can count toward the 50-hour multiengine ATP requirement?

Under 14 CFR 61.159(a)(3), you may credit a maximum of 25 hours of training in a full flight simulator (FFS) representing a multiengine airplane toward the 50-hour class requirement, provided the training was completed as part of an approved course under Part 121, 135, 141, or 142. Flight training devices (FTDs) and aviation training devices (ATDs) cannot be credited toward those 25 hours.

What does the ATP CTP course include before I can take the multiengine ATP knowledge test?

Under 14 CFR 61.156, the ATP Certification Training Program requires at least 30 hours of academic classroom instruction (covering high-altitude aerodynamics, meteorology, air carrier operations, and CRM/leadership) and at least 10 hours of simulator training, including at least 6 hours in a Level C or higher full flight simulator representing a multiengine turbine airplane rated at 40,000 pounds or greater.

What records do airlines see when they check the FAA Pilot Records Database (PRD)?

Under 14 CFR 111.105 and 111.135, once you grant written consent, the airline evaluates your current certificates, ratings, failed Part 61 practical tests, unoverturned FAA enforcement actions, accidents or incidents, DOT drug and alcohol violations, 5-year employment history, National Driver Register results, and previous employer training, checkride comments, disciplinary, and separation records.

What flight time counts toward the 1,000-hour requirement to upgrade to Part 121 Captain?

Under 14 CFR 121.436(a)(3) and (c), you must accumulate 1,000 hours as a Part 121 second in command, as a qualifying PIC under 14 CFR 91.1053(a)(2)(i) or 14 CFR 135.243(a)(1), or in eligible Part 135 on-demand operations. You may also credit up to 500 hours of military PIC time flown in a multiengine, turbine-powered, fixed-wing or powered-lift aircraft in operations requiring more than one pilot.

Sources