Breeze Airways Pilot Interview and Embark Cadet Program Guide

Short answer: The Breeze Embark Program allows Certified Flight Instructors (CFIs) at partner flight schools with 500 flight hours and a Commercial Multi-Engine Land (CMEL) rating to earn a conditional job offer, a Breeze Mentor, and airline transition tools, according to the Breeze Airways Pilot Appreciation page. Before flying as Second in Command for a Part 121 air carrier, federal rules in 14 CFR 121.436 and 14 CFR Part 61 Subpart G require completing the ATP Certification Training Program (at least 30 classroom hours and 10 simulator hours) and holding an Airline Transport Pilot (ATP) certificate at 1,500 hours or a Restricted Privileges ATP (R-ATP) between 750 and 1,250 hours, plus an aircraft type rating. Preparing for a Breeze interview means pairing glass-cockpit automation and point-to-point irregular operations judgment with stories reflecting Breeze's five Seriously Nice pillars: Safety, Kindness, Integrity, Ingenuity, and Excellence.

How the Breeze Embark Cadet Program Works at 500 Hours

Breeze Airways recruits early-career pilots through the Breeze Embark Program alongside direct-entry First Officer hiring. On its official Pilot Appreciation page (checked November 2026), Breeze states that Embark allows Certified Flight Instructors (CFIs) at partner schools with 500 flight hours and a Commercial Multi-Engine Land (CMEL) rating to receive a conditional offer from Breeze Airways. Accepted cadets gain access to a Breeze Mentor and training tools designed to smooth the transition from flight instruction to airline flying while building remaining Part 121 flight hours.

Breeze lists four current Embark partner institutions: two standalone flight academies, ATP Flight Schools and Epic Flight Academy, and two collegiate aviation universities, Utah Valley University and Southern Utah University. Under Title 14 of the Code of Federal Regulations (14 CFR), updated as of November 10, 2026 in the Electronic Code of Federal Regulations, collegiate aviation universities holding a 14 CFR 61.169 Letter of Authorization qualify graduates for reduced R-ATP hour minimums compared to standalone Part 61 or Part 141 academies.

Instructors outside a current partner school can either apply to instruct at an Embark partner institution or build qualifying hours independently through flight instruction or Part 135 operations. Under 14 CFR 61.159(c), commercial pilots employed by a Part 119 certificate holder in Part 135 operations may log Second-in-Command (SIC) time toward ATP or R-ATP totals in single-pilot aircraft if the operator holds an FAA-approved SIC Professional Development Program (PDP) under 14 CFR 135.99 and the Pilot in Command certifies the logbook. Under 14 CFR 61.159(c)(4), PDP time counts toward total hours but cannot count toward the 250-hour airplane PIC requirement. Follow the Embark link on Breeze's official site and the Breeze Careers portal to check current partner schools, pilot pay rates, and open requisitions.

Pathways to a Part 121 First Officer Seat at Breeze Airways (Breeze Pilot Appreciation page and 14 CFR Part 61 Subpart G, remaining hours from 500 hours by our calculation)

Pathway Track Entry Credentials FAA Total Hour Floor Remaining Hours From 500 Hours Minimum Pilot Age
Embark Partner Collegiate Bachelor's (14 CFR 61.160(b)) CFI at partner university, 500 hours, CMEL, 60 aviation semester credits under 61.169 LOA 1,000 hours R-ATP 500 hours 21 years
Embark Partner Collegiate Associate's (14 CFR 61.160(c)) CFI at partner school, 500 hours, CMEL, 30 aviation semester credits under 61.169 LOA 1,250 hours R-ATP 750 hours 21 years
Embark Partner Standalone Academy (14 CFR 61.159 or 61.160(f)) CFI at ATP Flight Schools or Epic Flight Academy, 500 hours, CMEL 1,500 hours ATP or age-21 R-ATP 1,000 hours 21 years for R-ATP, 23 years for ATP
U.S. Military Pilot Track (14 CFR 61.160(a)) Honorably discharged or active U.S. Armed Forces undergraduate pilot training graduate 750 hours R-ATP 250 hours 21 years
Unaffiliated CFI or Part 135 Bridge (14 CFR 61.159(c)) Commercial Pilot with Instrument and Multiengine ratings building CFI or Part 135.99 PDP time 1,000 to 1,500 hours depending on R-ATP eligibility 500 to 1,000 hours 21 years for R-ATP, 23 years for ATP

Logbook Audit Checklist From 500 Hours to FAA ATP Minimums

Earning a conditional offer at 500 hours requires hitting every FAA sub-category hour floor before entering airline training. Under 14 CFR 121.436(b), every Part 121 Second in Command must hold an ATP certificate (or R-ATP under 14 CFR 61.160) and an aircraft type rating. A Part 61.55 SIC type rating does not satisfy this rule. Under the July 15, 2013 Pilot Certification and Qualification Requirements final rule (78 FR 42324), federal law requires at least a Second-Class medical certificate under 14 CFR 61.23 for two-pilot Part 121 SIC duties and a First-Class medical for PIC duties, though you should confirm First-Class medical rules on your Breeze job posting.

Use this six-point logbook audit checklist written by our team to track your hours from 500 hours to ATP minimums:

  • Cross-country flight time (14 CFR 61.159(a)(1) and 61.160(e) and (f)): Log 500 hours of cross-country time for an unrestricted ATP at age 23, or 200 hours for any R-ATP category at age 21 (including 1,500-hour pilots with 200 cross-country hours).
  • Multiengine airplane class time (14 CFR 61.159(a)(3)): Log 50 hours in multiengine airplanes.
  • Night flight time (14 CFR 61.159(a)(2) and (b)): Log 100 night hours. After 20 full-stop night takeoffs and landings, each extra full-stop night takeoff and landing substitutes for 1 night hour, up to 25 hours.
  • Instrument flight time (14 CFR 61.159(a)(4)): Log 75 actual or simulated instrument hours, with simulator credit capped at 25 hours in an airplane FFS or FTD (or 50 hours under Part 142).
  • Airplane Pilot in Command time (14 CFR 61.159(a)(5)): Log 250 airplane PIC hours (or supervised SIC performing PIC duties), including 100 cross-country PIC hours and 25 night PIC hours.
  • Collegiate R-ATP transcripts (FAA Pilot Training guidance, updated June 8, 2026, and 14 CFR 61.160): Confirm your college holds a 14 CFR 61.169 Letter of Authorization (via FAA Form 8700-1 and AC 61-139) and issues your official certifying statement for Part 141 commercial and instrument coursework.

ATP CTP Prerequisites and the Part 121 New-Hire Training Pipeline

Stepping from flight instruction into a Part 121 jet requires completing the Airline Transport Pilot Certification Training Program (ATP CTP) under 14 CFR 61.156 before sitting for your multiengine ATP knowledge test, followed by Part 121 Subparts N and O qualification. Under 14 CFR 121.410(a), an air carrier's ATP CTP must remain separate from its Part 121 initial training program. Confirm ATP CTP sponsorship and scheduling details in your Embark offer packet or recruiter email.

Under 14 CFR 61.156(a) and (b), ATP CTP requires at least 30 classroom hours and at least 10 hours in a Part 60 multiengine turbine Flight Simulation Training Device (FSTD). Applicants must be at least 18 to take the knowledge test under 14 CFR 61.35 (78 FR 42324). Passing test results stay valid for 5 years, and Part 121 new hires may use an expired test result under 14 CFR 61.39 after completing both ATP CTP and the carrier's initial training program.

Once in Part 121 training, Group II turbojet First Officers complete indoctrination, simulator training, observation cycles, and supervised line flying. Under 14 CFR 121.438(a), when the SIC has fewer than 100 hours in type in Part 121 operations, the Captain must perform all takeoffs and landings at special airports and whenever visibility is at or below 3/4 mile, RVR is at or below 4,000 feet, runways have water, snow, or slush, braking action is less than good, crosswinds exceed 15 knots, windshear is reported nearby, or the PIC exercises prerogative. Under 14 CFR 121.438(b), either the PIC or SIC must have at least 75 line operating hours in type.

FAA ATP CTP and Part 121 Group II Turbojet Qualification Pipeline (14 CFR Parts 61 and 121)

Qualification Stage Governing FAA Rule Minimum Hours or Cycles Key Required Content and Sign-Offs
1. ATP CTP Academic Ground 14 CFR 61.156(a) 30 classroom hours minimum 8 hours high-altitude aerodynamics, 2 hours meteorology, 14 hours air carrier ops (MEL/CDL, operational control, automation), 6 hours CRM and leadership
2. ATP CTP Turbine Simulation 14 CFR 61.156(b) 10 FSTD hours minimum (6 Level C+ FFS, up to 4 Level 4+ FSTD) Level C+ FFS of at least 40,000 pounds MTOW covering stalls, upset recovery, icing, storms, gusty crosswinds, plus FMS and autoflight
3. Basic Indoctrination and Initial Ground 14 CFR 121.404, 121.415, 121.419 40 programmed indoctrination hours (unless reduced under 121.405) plus 2 stall/upset hours Company procedures, systems, approved CRM training, and stall/upset prevention across clean, takeoff, and landing configurations
4. Operations Familiarization 14 CFR 121.435 At least 2 operating cycles before IOE Required for new hires starting indoctrination on or after April 27, 2022, observed from the flight deck jumpseat with an operational headset
5. FFS Training and Type Rating Check 14 CFR 61.157(f), 121.409, 121.423, 121.441 Approved FFS curriculum plus proficiency check Low-altitude windshear, Level C+ FFS extended envelope training, LOFT, and ATP/type rating check via FAA inspector, APD, or TCE
6. Initial Operating Experience (IOE) 14 CFR 121.434(b) and (c) 25 hours and at least 4 operating cycles (at least 2 as pilot flying) Static interior/exterior preflight inspection demo (if pictorial check used) plus Group II jet legs supervised by a check pilot
7. Line Consolidation 14 CFR 121.434(g) and (h) 100 hours line operating flight time (including IOE) within 120 days Extendable to at most 150 days with refresher training or a supervised check pilot observation flight on or before day 120

What to Prepare for a Breeze Pilot or Embark Cadet Interview

Airlines update recruiting workflows periodically, so rely on your recruiter invitation email for your exact interview schedule, document uploads, and evaluation format. Rather than memorizing canned answers, prepare first-person logbook stories and clear technical briefings across three areas tied to Breeze's operating model and FAA multiengine ATP standards.

First, connect your real cockpit experiences to Breeze's Seriously Nice hospitality culture. On the Breeze Careers portal, Breeze defines its purpose as nice people flying to nice places, built on five pillars: Safety, Kindness, Integrity, Ingenuity, and Excellence. Because crews serve families and leisure travelers on direct point-to-point flights, prepare stories where you protected safety margins first, owned an honest error with integrity, and treated students, passengers, dispatchers, or crewmembers with kindness.

Second, sharpen glass-cockpit automation and flight path energy discipline. Under 14 CFR 61.155(c) and 61.156, multiengine ATP candidates are tested on flight management systems (FMS), autoflight modes, flight path warning systems, high-altitude aerodynamics, windshear avoidance, and stall prevention. Practice explaining how you verify flight mode annunciations after runway changes, when you step down automation instead of going heads-down in terminal airspace, and how you call out deviations clearly as Pilot Monitoring.

Third, prepare for point-to-point irregular operations (IROPS) scenarios. According to Breeze's Pilot Appreciation page, Breeze expanded to serve 56 cities across 29 states within three years of its first flight and welcomed its 500th pilot. Because point-to-point flights operate away from hub maintenance centers, be ready to discuss joint pilot-dispatcher operational control, Minimum Equipment List (MEL) and Configuration Deviation List (CDL) procedures at outstations, thunderstorm diversion fuel planning, and ICAO certificate limitations under 14 CFR 61.159(e) and 61.160(h).

15 Practice Questions for Breeze Pilot and Embark Interviews

Our team wrote these 15 practice questions covering Breeze's Seriously Nice pillars, glass-cockpit automation, Part 121 regulations, and point-to-point IROPS. Use them to practice telling your own stories and technical reasoning out loud rather than memorizing scripts.

    1. Why do you want to fly point-to-point routes at Breeze Airways rather than at a hub-and-spoke carrier, and how have you researched crew domiciles on the Breeze Careers portal?
    1. Breeze names Safety, Kindness, Integrity, Ingenuity, and Excellence as its Seriously Nice pillars. Tell me about a day when upholding safety meant disappointing a student, passenger, or supervisor, and how you handled it kindly.
    1. Tell me about an error you caught yourself making in flight or preflight before anyone else noticed. How did you report it and adjust your personal habits?
    1. Describe a flight with a Captain, check instructor, or colleague whose communication style clashed with yours. How did you keep cockpit coordination safe and respectful?
    1. For Embark CFI candidates: Tell me about a student who hit a learning plateau before a checkride. What ingenious teaching change helped them master the maneuver?
    1. Walk through how you cross-check autoflight mode annunciations on a glass cockpit when ATC issues a late runway and arrival change below 10,000 feet.
    1. If the airplane misses a programmed VNAV altitude constraint during a busy arrival, what are your immediate actions as Pilot Flying versus Pilot Monitoring?
    1. Explain high-altitude aerodynamic margins in a swept-wing jet, why low-energy states form near maximum altitude, and how stall recovery under 14 CFR 61.156 and 121.419 prioritizes angle of attack.
    1. Under 14 CFR 121.438, what weather, visibility, RVR, runway, and crosswind limits require the Captain to make the takeoff and landing when the First Officer has under 100 hours in type?
    1. Compare Restricted Privileges ATP rules under 14 CFR 61.160 and 61.167 with an unrestricted ATP under 14 CFR 61.159, including ICAO certificate limitations on international routes.
    1. At a point-to-point outstation without company maintenance on field, an avionics fault appears before pushback. Walk through how you coordinate with Dispatch and apply the MEL.
    1. En route to a coastal Florida or Caribbean airport, afternoon thunderstorms close your destination and fuel margins tighten. How do you sequence your diversion plan with the Captain, Dispatch, cabin crew, and Guests?
    1. On approach at 800 feet AGL, you see airspeed and sink rate outside stabilized approach gates while the Captain continues descending. What exact callout do you make?
    1. During an outstation ground delay with vacationing families onboard, once cockpit duties and Tarmac Delay Plan checks with Dispatch are complete, how can pilots support Flight Attendants and Guests?
    1. Opening your logbook right now, walk me through your most demanding actual IMC, night, or gusty crosswind flight, the threats you briefed, and one lesson you took forward.

Two-Week Preparation Plan Before Your Interview Date

Whether you are interviewing at 500 hours for Embark or applying directly near ATP minimums, structure your final 14 days with this four-step plan written by our team:

Days 1 to 3, Reconcile logbooks and FAA records: Match electronic and paper logbook columns against IACRA and 14 CFR 61.159 or 61.160 totals. Review your FAA Pilot Records Database (PRD) history so you can explain any stage check, checkride, or operational event honestly without excuses, and confirm open domicile and document details on your job posting.

Days 4 to 7, Outline six first-person stories: Draft Situation, Action, Result, and Lesson outlines for six real flights covering weather go/no-go calls, checklist or automation catches, voluntary error reporting, crew conflict resolution, guest kindness during delays, and training resilience.

Days 8 to 11, Brief approach charts and Part 121 rules: Practice three-minute briefings on complex arrival and ILS or RNAV plates. Review 14 CFR 121.434 (IOE and 100-hour consolidation), 121.436 (type rating and 1,000-hour air carrier PIC rule), 121.438 (15-knot crosswind, 3/4-mile visibility, and 4,000-foot RVR limits), MEL/CDL dispatch rules, and high-altitude stall recovery.

Days 12 to 14, Practice out loud under follow-up questioning: Record two-minute behavioral answers and structured technical explanations prioritized from flight safety to operational coordination and guest care.

Practice example

Tell me about a time when protecting flight safety forced you to cancel or delay a flight and disappoint students or passengers, and how you handled the communication.

Example answer written by our team. The applicant is invented. Last summer, while instructing at a busy towered field, an afternoon thunderstorm cell moved across the airport right as my commercial multiengine student and I taxied out for a stage check prep flight. A second student was waiting in the lobby for my next block, and both were anxious about upcoming checkride dates. Even though tower was still launching departures between cells, lightning appeared within five miles and surface gusts shifted past 20 knots. I taxied back to the ramp, shut down, and walked inside to speak with both students face to face. I pulled up the radar loop, explained why launching into convective windshear violated our safety margins, and converted both blocks into a joint cockpit procedures and emergency briefing session at no lost afternoon prep time. Both students stayed on track for their checkrides, and keeping them informed right away turned a frustrating weather cancellation into a productive afternoon.

This answer puts flight safety ahead of schedule pressure without blaming weather or air traffic control. It also shows Breeze's Kindness and Ingenuity values by communicating face to face right away and salvaging practical value for both students.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

What are the minimum requirements for the Breeze Embark Cadet Program?

According to the Breeze Airways Pilot Appreciation page, the Breeze Embark Program allows Certified Flight Instructors (CFIs) at partner flight schools with 500 flight hours and a Commercial Multi-Engine Land (CMEL) rating to receive a conditional offer from Breeze Airways. Accepted cadets receive access to a Breeze Mentor and airline transition training tools while building remaining ATP or R-ATP hours.

Which flight schools partner with Breeze Airways for the Embark program?

Breeze Airways lists ATP Flight Schools, Epic Flight Academy, Utah Valley University, and Southern Utah University as Embark partner schools on its Pilot Appreciation page. Applicants should check the official Embark link from Breeze's site to verify any newly added partner schools before applying.

How many flight hours do I need to become a First Officer at Breeze Airways?

Under 14 CFR 121.436 and 14 CFR Part 61 Subpart G, every Part 121 First Officer must hold an unrestricted ATP at 1,500 hours (age 23) or a Restricted Privileges ATP at age 21 with 750 hours for qualifying U.S. military pilots, 1,000 hours for authorized 60-credit aviation bachelor's graduates, 1,250 hours for 30-credit aviation associate's graduates, or 1,500 hours with 200 cross-country hours.

Where can I check current Breeze Airways pilot bases and First Officer pay rates?

Breeze Airways directs pilot and Embark applicants on its Pilot Appreciation page and Breeze Careers portal to follow its official application links to view current pilot pay rates, partner schools, and active crew base openings. Because Breeze's route network expands regularly, confirm current domicile options directly on the live job posting.

What happens during ATP CTP, operations familiarization, IOE, and line consolidation?

Under 14 CFR 61.156, multiengine ATP applicants first complete at least 30 classroom hours and 10 turbine simulator hours in an approved ATP CTP before taking the knowledge test. After entering Part 121 training under 14 CFR 121.435 and 121.434, new hires observe at least 2 flight deck operating cycles with a headset, complete at least 25 hours and 4 cycles of Group II jet Initial Operating Experience (at least 2 as pilot flying) with a check pilot, and reach 100 line operating hours within 120 days.

Sources