Cargo Airlines in the USA: FAA Certification, Operating Rules, and Pilot Requirements

Short answer: Cargo airlines in the USA are certificated under 14 CFR Part 119 and operate under Part 121 for scheduled and large all-cargo service, Part 135 for on-demand and feeder freight, or Part 125 when common carriage is not involved with a maximum payload capacity of 6,000 pounds or more. Every Part 121 and Part 135 cargo operator must maintain a Part 5 Safety Management System, hold an FAA-approved hazardous materials program or explicit prohibition in its Operations Specifications, and evaluate pilot backgrounds in the FAA Pilot Records Database under 14 CFR Part 111 before any pilot begins service.

How Cargo Airlines Are Classified in the USA

If you are preparing to fly for or work with cargo airlines in the USA, the first thing to understand is how the Federal Aviation Administration groups them. Title 14 of the Code of Federal Regulations Part 119 governs the certification of air carriers and commercial operators in air commerce. Which operating rule a cargo carrier falls under depends on whether the operation involves common carriage and the size and payload capacity of the aircraft.

Large U.S.-based airlines, regional air carriers, and all-cargo operators are generally authorized to operate under a 14 CFR Part 121 certificate. Under 14 CFR 119.21, commercial operators engaged in intrastate common carriage of property for compensation or hire and direct air carriers conduct domestic, flag, or supplemental operations under Part 121. On-demand, unscheduled cargo operators and feeder carriers that move freight to larger Part 121 airlines operate under a 14 CFR Part 135 certificate. Many Part 135 operators also provide passenger and cargo service to remote areas.

When common carriage is not involved, 14 CFR 119.23 draws a strict line based on seat count and maximum payload capacity. Operators of U.S.-registered civil airplanes or powered-lift with a passenger-seat configuration of 20 seats or more (excluding crewmember seats) or a maximum payload capacity of 6,000 pounds or more must comply with Part 125 unless deviation authority is issued. Noncommon carriage or private carriage operations for compensation or hire using airplanes or powered-lift with fewer than 20 seats and a payload capacity of less than 6,000 pounds must be conducted under Part 135.

FAA regulatory classifications for U.S. cargo and commercial operators under 14 CFR Part 119

Operating Part Carriage Type Aircraft and Payload Scope Typical Cargo Role
14 CFR Part 121 Common carriage (domestic, flag, supplemental) Large aircraft and scheduled or supplemental all-cargo fleets Major all-cargo operators, regional carriers, and scheduled airlines
14 CFR Part 135 Common carriage (commuter, on-demand) or small noncommon/private carriage On-demand fleets. Under 20 seats and under 6,000 pounds payload for noncommon carriage Feeder cargo networks supplying Part 121 carriers and remote area freight
14 CFR Part 125 When common carriage is not involved 20 or more passenger seats or 6,000 pounds or more maximum payload capacity Large private or noncommon carriage freight transport

Air Carrier Certificates vs. Operating Certificates

Under 14 CFR 119.5 and 119.33, the FAA issues two distinct types of certificates depending on your authority. A person authorized by the Administrator to conduct operations as a direct air carrier is issued an Air Carrier Certificate. No person may operate as a direct air carrier without holding appropriate economic authority from the Department of Transportation. A person not authorized to conduct direct air carrier operations, such as an intrastate commercial operator or a Part 125 operator when common carriage is not involved, is issued an Operating Certificate.

To conduct commercial passenger or cargo aircraft operations for compensation or hire under Part 121 or Part 135, the operator must be a citizen of the United States, obtain the appropriate Air Carrier Certificate or Operating Certificate, and obtain Operations Specifications (OpSpecs) that prescribe the authorizations, limitations, and procedures for each kind of operation. Under 14 CFR 119.5, an operator is issued only one certificate authorizing common carriage, or one certificate authorizing noncommon or private carriage, regardless of the kind of operation or the class or size of aircraft. An operator holding a certificate for noncommon or private carriage is prohibited from conducting any operations in common carriage, and a common carriage certificate holder may not conduct operations in noncommon carriage.

All certificate holders authorized to conduct operations under Part 121 or Part 135 must also have a Safety Management System (SMS) that meets the requirements of 14 CFR Part 5. In addition, under 14 CFR 119.33, every applicant for a Part 119 certificate or for OpSpecs authorizing a new kind of operation subject to 14 CFR 121.163 or 135.145 must complete aircraft proving tests under a letter of authorization from the Administrator.

The 5-Phase FAA Certification Process and Timelines

Under 14 CFR 119.35, an applicant for an Air Carrier Certificate or Operating Certificate must submit the application to the FAA at least 90 days before the date of intended operation. Both Part 121 and Part 135 initial certifications follow a structured 5-phase and 3-gate system. Every item in a phase must be completed before the applicant passes a gate and moves to the next phase.

Effective January 24, 2024, the FAA Flight Standards Service implemented FAA Notice 8900.766 to combine elements of the certification process and verify applicant readiness early. In addition, starting September 30, 2026, the FAA is transitioning initial Part 135 air operator and air carrier certificate applications from the legacy Safety Assurance System (SAS) External Portal to Aviation Integrated Safety Services (AIS Services), where applicants sign in through the government login portal and can upload digital application documents up to 500MB per file in PDF, Excel, or Word format. On the Canadian side of North American freight, Transport Canada oversees commercial air services under Part VII of the Canadian Aviation Regulations (CARs) and the Air Operator Certification Manual (TP 4711).

  • Phase 1: Pre-application (completes Gate 1). The prospective operator inquiries with the FAA, requests portal access, and submits FAA Form 8400-6, Pre-application Statement of Intent (PASI). The FAA initiates the Certification Service Oversight Process (CSOP) to check agency resources and assign a certification team or place the applicant on a wait list, followed by a Pre-application Meeting with key management personnel.
  • Phase 2: Formal Application (completes Gate 2). The applicant submits the Formal Application Letter, Schedule of Events, Compliance Statement, Company Manuals (General Operations Manual and General Maintenance Manual, if required), Training Curricula, Management Qualification Resumes, aircraft purchase or lease contracts, Element Design Assessment Tools, and proposed OpSpecs, concluding with a Formal Application Meeting.
  • Phase 3: Design Assessment. The FAA certification team conducts an in-depth review of the operator's manuals and documents to verify regulatory compliance and conformity to safe operating practices.
  • Phase 4: Performance Assessment (completes Gate 3). The certification team evaluates whether the applicant's proposed procedures and training programs for directing personnel are effective in real operations.
  • Phase 5: Administrative Functions. Once the Certification Project Manager determines the applicant is fully capable of complying with Title 49 of the United States Code and 14 CFR, the FAA issues the certificate and the Operations Specifications.

Hazardous Materials (Dangerous Goods) Programs for Cargo Carriers

Every cargo pilot and dispatcher needs to know how an airline's Operations Specifications handle dangerous goods. Under 14 CFR 119.49, the OpSpecs for domestic, flag, commuter, supplemental, and on-demand operations must include either an explicit authorization permitting, or a prohibition against, accepting, handling, and transporting materials regulated as hazardous materials under 49 CFR parts 171 through 180. In Part 135 certification, this is structured as a HazMat Manual Will or Will-Not Carry Program.

All Part 121 air carriers and most Part 135 air carriers are required to have an FAA-approved hazardous materials (dangerous goods) program. Carriers that elect to accept, handle, and transport dangerous goods must build a complete program covering acceptance, handling, transportation, and mandatory training for all employees. Under 14 CFR Part 121 Subpart Z and Appendix O, certificate holders must maintain a hazardous materials training program and keep training records for crewmembers and ground personnel.

The rules governing air transport of dangerous goods come from three regulatory bodies of text: the Federal Aviation Regulations (14 CFR), the Hazardous Materials Regulations (49 CFR Parts 100 through 185), and the ICAO Technical Instructions for the Safe Transportation of Dangerous Goods by Air. Part 121 and Part 135 operators work with the FAA Office of Hazardous Materials Safety, and Hazardous Materials Aviation Safety Inspectors (HMASIs) inspect carriers across the United States and its territories. Carriers that transport hazardous materials also have Principal Hazardous Materials Inspectors (PHIs) assigned to their certificates to oversee their programs.

Required Management Personnel and Pilot Qualifications

Whether you are interviewing for a line pilot seat at a cargo carrier or aiming for a chief pilot role later in your career, 14 CFR Part 119 sets strict rules on airline leadership. Under 14 CFR 119.65, a Part 121 certificate holder must have qualified personnel serving full-time in five positions (or FAA-approved equivalents based on the kind of operation, number and type of aircraft, and area of operations): Director of Safety, Director of Operations, Chief Pilot for each category of aircraft used as listed in 14 CFR 61.5(b)(1), Director of Maintenance, and Chief Inspector. Under 14 CFR 119.69, a multi-pilot Part 135 operator must have qualified personnel serving in three positions: Director of Operations, Chief Pilot, and Director of Maintenance (single-pilot Part 135 operators are excepted).

Under 14 CFR 119.65(e) and 119.69(e), both Part 121 and Part 135 operators must list the names, business addresses, duties, and authority of these leaders in their company manual and notify their responsible Flight Standards office within 10 days of any change in personnel or vacancy. In addition, 14 CFR 119.73 restricts the employment of former FAA inspectors. A Part 121 or Part 135 operator may not knowingly employ or contract an individual to act as an agent or representative before the FAA if, in the preceding 2 years, that person served as or oversaw a Flight Standards Service aviation safety inspector with direct responsibility to inspect that certificate holder, unless the individual was employed by the certificate holder before October 21, 2011.

FAA Flight Operations Management Qualifications under 14 CFR 119.67 and 119.71

Position Certificate Requirement Supervisory or Operational Control Experience Pilot in Command (PIC) Experience
Part 121 Director of Operations (large aircraft) Airline Transport Pilot (ATP) certificate At least 3 years within the last 6 years in large aircraft exercising operational control under Part 121 or 135 At least 3 years as PIC in large aircraft under Part 121 or 135 (within the past 6 years if first-time DO)
Part 121 Chief Pilot (large aircraft) ATP certificate with appropriate ratings in the category of aircraft used Not required by 119.67(b) At least 3 years as PIC in large aircraft under Part 121 or 135 in the same category (within the past 6 years if first-time Chief Pilot)
Part 135 Director of Operations (ATP PIC operations) ATP certificate Either at least 3 years within the last 6 years exercising operational control under Part 121 or 135, OR meet the PIC requirement If not using the supervisory path: at least 3 years as PIC under Part 121 or 135 (within the past 6 years if first-time DO)
Part 135 Chief Pilot (ATP PIC operations) ATP certificate with appropriate ratings and qualified as PIC in at least one aircraft used Not required by 119.71(c) At least 3 years as PIC under Part 121 or 135 (within the past 6 years if first-time Chief Pilot)
Part 135 Director of Operations or Chief Pilot (Commercial PIC only) Commercial Pilot certificate (plus instrument rating if required for any PIC) DO may qualify via 3 years within the last 6 years exercising operational control under Part 121 or 135. Chief Pilot must be PIC-qualified in at least one company aircraft At least 3 years as PIC under Part 121 or 135 (within the past 6 years if serving for the first time)

Pilot Records Database (PRD) Checks and Your Pre-Interview Checklist

When you apply to fly for any U.S. cargo airline certificated under Part 119 to conduct Part 121, Part 125, or Part 135 operations, the carrier must evaluate your background in the FAA Pilot Records Database (PRD) under 14 CFR Part 111. On September 9, 2024, the Pilot Records Improvement Act (PRIA) ceased to be effective and is no longer an available alternative to the PRD. Except under a documented good-faith exception when the FAA notifies the carrier that employment history records are missing, no reviewing entity may allow you to begin service as a pilot until it has evaluated all required PRD records.

Under 14 CFR 111.205 through 111.255, air carriers and operators must report pilot records to the PRD within 30 days of the effective date or final action, including drug and alcohol testing records (verified positive drug tests, breath alcohol results of 0.04 or greater, and refusals), training, qualification, and proficiency records (including check pilot comments and unsatisfactory maneuvers), final disciplinary actions pertaining to pilot performance that were not overturned, and final separation from employment records. Part 119 air carrier certificate holders operating under Part 121 or 135 were also required to upload historical PRIA records dating back to August 1, 2005 (and back to August 1, 2010 for operating certificate holders). Records related to flight time, duty time, rest time, physical exams, recent flight experience, and approved Voluntary Safety Reporting Programs under Part 193 are prohibited from being entered into the PRD. The FAA maintains a pilot's PRD records for the life of the pilot.

Use our team's step-by-step PRD checklist below before your next cargo airline interview so your background review never delays your class date.

  • Step 1: Apply for electronic PRD access at least 7 days before you need to review your file under 14 CFR 111.305 using your full name as it appears on your pilot certificate, your FAA certificate number, mailing address, phone number, and email address.
  • Step 2: Audit your FAA records in the PRD under 14 CFR 111.135, including current pilot and medical certificates, type ratings, any failed practical tests under Part 61, unoverturned enforcement findings, accident or incident records as PIC or SIC, and DOT drug and alcohol history.
  • Step 3: Review all training, qualification, proficiency, disciplinary, and separation records uploaded by past Part 121, 125, 135, or Part 91K employers. If you spot an error, report it through the PRD under 14 CFR 111.320. The reporting entity must correct an agreed inaccuracy within 10 days or initiate a dispute investigation within 30 days.
  • Step 4: Update and affirm that your 5-year employment history in the PRD is complete and accurate, then grant written consent in the PRD under 14 CFR 111.310 so the hiring cargo operator can retrieve your file.
  • Step 5: Sign a separate written consent under 14 CFR 111.110 and 111.310(c) authorizing the carrier to search the National Driver Register (NDR) and request your State motor vehicle driving records. You have the right under 14 CFR 111.120(c) to request a copy of any State driving records the operator obtains, and the carrier must provide them within 30 days.

Wet Leasing, Military Contracts, and Recency of Operation Rules

In cargo aviation, wet leasing (providing an aircraft with crew) and military contract flying are major parts of how carriers operate and how interview panels frame operational scenarios. Under 14 CFR 119.53, before a Part 119 certificate holder conducts common carriage operations involving a wet lease, it must give the FAA a copy of the wet lease agreement. The Administrator reviews crewmembers and training, airworthiness and maintenance, dispatch, servicing, and scheduling to determine which party has operational control and amends the OpSpecs of both parties. However, 14 CFR 119.53(b) strictly prohibits any Part 119 certificate holder from wet leasing an aircraft from a foreign air carrier, any other foreign person, or any person not authorized to engage in common carriage.

Many supplemental Part 121 and on-demand Part 135 cargo carriers also fly for the U.S. military. Under 14 CFR 119.55, the FAA Administrator may authorize a certificate holder conducting supplemental or on-demand operations to deviate from applicable requirements of Part 117, 119, 121, or 135 to perform operations under a U.S. military contract. Carriers contracting with the Department of Defense Air Mobility Command (AMC) submit deviation requests to AMC, which consolidates and forwards them with recommendations to the FAA. The Department of Defense must certify that the operation is essential to national defense and cannot be performed without deviation authority, and the FAA must find the deviation is not based on economic advantage. For emergency operations needed to protect life or property, 14 CFR 119.57 allows the FAA to issue an OpSpecs amendment or grant an oral deviation, provided the operator submits documentation of the emergency within 24 hours after completing the flight.

Certificate holders must also maintain recency of operation under 14 CFR 119.63. A carrier may not conduct a kind of operation authorized in its OpSpecs unless it has conducted that kind of operation within the preceding 30 consecutive calendar days for domestic, flag, or commuter operations, or within the preceding 90 consecutive calendar days for supplemental or on-demand operations. If a carrier goes beyond that window, it must advise the Administrator at least 5 consecutive calendar days before resuming that kind of operation and make itself available during those 5 days for a full FAA reexamination. If a Part 135 certificate holder terminates operations entirely, 14 CFR 119.61(c) requires it to surrender its operating certificate and OpSpecs within 30 days.

Practice example

You are interviewing at a Part 121 all-cargo airline after flying for a Part 135 feeder cargo operator. How do you verify whether your aircraft is authorized to carry a hazardous materials shipment, and how do Part 121 and Part 135 rules govern that check?

Example answer, written by us. It is not a real applicant's story. In my current Part 135 feeder role, checking whether we can carry a dangerous goods load always starts with our Operations Specifications and our General Operations Manual. Under 14 CFR 119.49, every carrier's OpSpecs have to state clearly whether the company is authorized to accept, handle, and transport regulated hazardous materials or whether it is prohibited from doing so. Before I sign off on a manifest with dangerous goods on board, I verify three things. First, I check that our OpSpecs authorize us to carry hazmat. Second, I make sure every crewmember on the flight is current on our FAA-approved hazardous materials training. Third, I confirm the shipment paperwork and handling meet the Hazardous Materials Regulations and the ICAO Technical Instructions. Stepping up to a Part 121 all-cargo airline, I know every Part 121 carrier is required to run a full FAA-approved dangerous goods and training program under Part 121 Subpart Z, with direct oversight from an assigned Principal Hazardous Materials Inspector.

This answer names the exact regulatory hooks in 14 CFR 119.49, 14 CFR Part 121 Subpart Z, and the ICAO Technical Instructions while sounding like a real pilot walking through a preflight check. It shows the panel captain that you verify your Operations Specifications and crew training currency before accepting any freight.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

What FAA certificates do cargo airlines in the USA operate under?

Under 14 CFR Part 119, large scheduled airlines, regional carriers, and all-cargo operators generally operate under a Part 121 certificate, while on-demand and cargo feeder operators fly under a Part 135 certificate. When common carriage is not involved and the airplane has 20 or more passenger seats or a maximum payload capacity of 6,000 pounds or more, the operator must comply with Part 125.

What is the payload limit between Part 125 and Part 135 for noncommon carriage cargo?

Under 14 CFR 119.23, operations when common carriage is not involved using U.S.-registered civil airplanes or powered-lift with a maximum payload capacity of 6,000 pounds or more (or 20 or more passenger seats) fall under Part 125. Noncommon or private carriage operations for compensation or hire with fewer than 20 seats and less than 6,000 pounds of payload capacity must be conducted under Part 135.

Are cargo airlines required to have an FAA hazardous materials program?

Yes. All Part 121 air carriers and most Part 135 air carriers must have an FAA-approved hazardous materials (dangerous goods) program, and 14 CFR 119.49 requires every operator's Operations Specifications to state an explicit authorization permitting or a prohibition against accepting, handling, and transporting regulated hazardous materials.

How far in advance must a cargo operator apply for an FAA certificate?

Under 14 CFR 119.35, an applicant for an Air Carrier Certificate or Operating Certificate must submit its application to the FAA at least 90 days before the date of intended operation. Amendments to Operations Specifications involving mergers, proving tests, new kinds of operations, or unproven aircraft also require filing at least 90 days in advance under 14 CFR 119.51.

How do cargo airlines check pilot records before hiring?

Under 14 CFR Part 111, operators certificated under Part 119 for Part 121, 125, or 135 operations must use the FAA Pilot Records Database (PRD) to evaluate FAA certificate and enforcement records, past employer training and disciplinary records, a 5-year employment history, and National Driver Register motor vehicle records before a pilot begins service. The Pilot Records Improvement Act (PRIA) ceased to be effective on September 9, 2024.

Sources