Center Pilot & Part 142 Pilot Training Centers: FAA Rules, Roles, and Curricula
Short answer: In aviation, a pilot center is an FAA-certificated Part 142 training center that provides contract training, testing, and checking in flight simulators and advanced flight training devices as an alternative way to meet requirements under 14 CFR Parts 61, 63, 65, 91, 121, 125, 135, or 137. Under 14 CFR 142.49, a center pilot serving as a training center instructor may conduct at most 8 hours of instruction in any 24-consecutive-hour period, excluding briefings and debriefings.
What Is a Part 142 Pilot Training Center
When pilots search for a pilot center or center pilot, they are looking for the rules governing FAA Part 142 training centers and the instructors, evaluators, and check pilots who work inside them. Under 14 CFR 142.3, a training center is a certificated organization that provides training, testing, and checking under contract or other arrangement to airmen.
Part 142 provides an alternative means to accomplish airman training required by 14 CFR Parts 61, 63, 65, 91, 121, 125, 135, or 137. Since August 3, 1998, no person may conduct training, testing, or checking in advanced flight training devices or full flight simulators without holding a Part 142 training center certificate and training specifications, unless the training falls under an explicit regulatory exemption such as an air carrier training its own employees under Part 121 or Part 135 (14 CFR 142.1).
Under 14 CFR 142.15, every certificated pilot training center must maintain a principal business office at the physical address on its certificate and have exclusive access, for adequate periods of time, to flight training equipment and courseware, including at least one flight simulator or advanced flight training device. Instructional rooms and booths must conform to local building, sanitation, and health codes and be free from routine distractions caused by airport flight and maintenance operations.
- Initial certificate filing: An applicant must file for a training center certificate and training specifications at least 120 calendar days before beginning any proposed training (14 CFR 142.11).
- Certificate amendments and satellites: Amending approved training or starting operations at a satellite training center requires notifying the FAA in writing at least 60 calendar days in advance (14 CFR 142.11 and 142.17).
- Domestic certificate duration: A certificate issued to a training center inside the United States remains effective until surrendered, suspended, revoked, or terminated (14 CFR 142.7).
- International certificate duration: A certificate for a training center located outside the United States expires at the end of the twelfth month after the month it is issued or renewed (14 CFR 142.7).
- Management changes and surrendered certificates: A center must acknowledge that it will notify the FAA within 10 working days of any change in required management positions (14 CFR 142.11), and a suspended, revoked, or terminated certificate must be returned within 5 working days of notification (14 CFR 142.7).
Part 142 Pilot Center vs. Part 141 Pilot School
Pilots often compare a Part 142 training center with a Part 141 certificated pilot school. While both operate under FAA-approved syllabi and Air Agency Certificates, Part 142 centers are built around flight simulation training devices and contract training across multiple regulatory parts, whereas Part 141 schools focus on structured flight and ground courses using airports, briefing areas, and training aircraft.
Under 14 CFR 141.5, a Part 141 pilot school must establish an 80 percent or higher first-attempt pass rate on tests and graduate at least 10 different people within the 24 calendar months before applying. To receive examining authority under 14 CFR 141.63, a Part 141 course must have trained at least 10 students with at least a 90 percent first-attempt pass rate. While normal private pilot certification requires 40 flight hours, an FAA-approved Part 141 school may reduce that minimum to 35 hours, though the FAA notes most learners require 60 to 75 hours to reach proficiency.
Part 141 pilot schools and Part 142 training centers can also partner directly. Under 14 CFR 142.33 and 141.26, a Part 141 school and a Part 142 center may sign a formal agreement to provide training, testing, and checking for one another, provided the Part 141 school gets FAA approval for a training course outline covering both portions and student records are forwarded to become part of the permanent record.
Regulatory comparison of 14 CFR Part 142 training centers and 14 CFR Part 141 pilot schools (ecfr.gov, up to date as of November 2026)
| Requirement or Feature | Part 142 Pilot Training Center | Part 141 Certificated Pilot School |
|---|---|---|
| Core Equipment Mandate | Must have exclusive access to at least 1 flight simulator or advanced flight training device (14 CFR 142.15) | Must have continuous use of origination airports, pilot briefing areas, and compliant training aircraft (14 CFR 141.38 to 141.43) |
| Certificate Duration | n/a | Expires on the last day of the 24th calendar month from the month issued (14 CFR 141.17) |
| Evaluator Testing Window | Must maintain enough approved evaluators to test graduates within 7 calendar days of completion (14 CFR 142.13) | Check instructors require school enrollment of at least 10 students at designation (14 CFR 141.33) |
| Transfer Credit Into Part 141 | Up to 50 percent of curriculum flight or knowledge requirements when transferring from a Part 142 approved course (14 CFR 141.77) | Up to 50 percent from a Part 141 approved course. up to 25 percent from non-Part 141/142 courses (14 CFR 141.77) |
| Trainee Record Retention | At least 1 year following completion of training, testing, or checking (14 CFR 142.73) | At least 1 year from the date the student graduates, terminates, or transfers (14 CFR 141.101) |
Worked Example: Calculating Part 141 Transfer Credit and Center Duty Limits
Before you switch training providers or accept a schedule as a center pilot instructor, you need to calculate how the FAA caps transfer hours and daily instruction time.
First, consider a student transferring from a Part 142 approved course into a Part 141 commercial pilot course. Under 14 CFR 141.77, after the student passes a proficiency test and a knowledge test conducted by the receiving Part 141 school, the receiving school may credit at most 50 percent of the curriculum's flight and aeronautical knowledge requirements for previous Part 141 or Part 142 approved training. If the previous training came from outside a Part 141 or Part 142 approved course, the maximum credit drops to 25 percent. By our calculation from 14 CFR 141.77, transferring from a Part 142 approved course allows a receiving Part 141 school to grant up to twice as much transfer credit (50 percent vs. 25 percent) as transferring from a non-approved Part 61 program.
Second, consider a center pilot working a full simulator schedule under 14 CFR 142.49(c)(1). A training center may not allow an instructor to conduct more than 8 hours of instruction in any 24-consecutive-hour period, excluding briefings and debriefings. By our calculation from 14 CFR 142.49(c)(1), an instructor who conducts two 4-hour simulator sessions (8 hours of instruction total) plus 1 hour of pre-flight briefing and 1 hour of post-flight debriefing per session (4 hours of briefing/debriefing total) works a 12-hour day while remaining within the 8-hour instruction limit, because the 4 hours of briefings and debriefings are excluded from the 8-hour cap.
Center Pilot Roles: Instructors, Evaluators (TCEs), and ATP-CTP Rules
A pilot employed at a Part 142 training center typically serves in one of three roles: a Training Center Instructor, an Airline Transport Pilot Certification Training Program (ATP-CTP) Instructor, or an FAA-approved Training Center Evaluator (TCE). Each role carries strict eligibility, recurrent testing, and currency mandates under Subpart C of Part 142.
Under 14 CFR 142.47, every training center instructor must be designated in writing for each approved course, be at least 18 years old, and be able to read, write, speak, and understand English. If instructing in an aircraft in flight, the pilot must be qualified under Part 61 Subpart H and hold at least a valid second-class medical certificate when serving as a required crewmember (14 CFR 142.49). Prior to initial designation, an instructor must complete at least 8 hours of ground training covering teaching methods, learning principles, simulator controls, environmental and fault panels, simulation limitations, minimum equipment requirements, and crew resource management, and pass a written test of equivalent difficulty to the FAA flight and instrument instructor knowledge tests.
To instruct in a flight simulation training device (FSTD) representing an aircraft that requires a type rating, a powered-lift over 12,500 pounds, a turbojet-powered powered-lift, or an ATP curriculum, the instructor must meet the aeronautical experience requirements of 14 CFR 61.159, 61.161, or 61.163, or hold an unrestricted ATP certificate with appropriate ratings (14 CFR 142.47). Every 12 calendar months, each instructor must pass a written test and an annual proficiency check in the equipment they teach (14 CFR 142.53). Completion in the calendar month before or after the due month counts as taken in the due month.
- Simulator instructor operational currency (14 CFR 142.53(b)): Instructors teaching in a simulator approved for all ATP or type rating training and testing must meet one of three annual options: (1) fly 2 hours including 3 takeoffs and 3 landings as sole manipulator of the controls in an aircraft of the same category, class, and type. (2) complete a Part 121 or Part 135 line-observation program in the same aircraft type plus at least 1 hour of line-oriented flight training (LOFT) as sole manipulator in the simulator. or (3) complete an approved in-flight observation course of at least 2 hours in the same aircraft type plus at least 1 hour of LOFT as sole manipulator in the simulator.
- ATP-CTP instructor requirements (14 CFR 142.54): To teach in an Airline Transport Pilot Certification Training Program under 14 CFR 61.156, an instructor must hold an ATP certificate with an airplane multiengine class rating and have at least 2 years of experience as PIC under 14 CFR 91.1053(a)(2)(i) or 135.243(a)(1), or as PIC or SIC under Part 121. If teaching in an FSTD, the instructor must hold the aircraft type rating and have received training and evaluation on the demonstrated maneuvers within the preceding 12 months.
- Training Center Evaluators (14 CFR 142.55): A TCE is an employee of the training center approved by the FAA to administer certification tests, added rating tests, authorizations, and proficiency checks. Prior to designation and every 12 calendar months thereafter, a TCE must complete a curriculum covering evaluator duties, testing procedures, pilot performance evaluation, and management of unsatisfactory tests, and pass a written test and annual proficiency check.
- Evaluator staffing ratio (14 CFR 142.13(b)): A training center must designate and maintain enough approved evaluators to administer required checks and tests to graduation candidates within 7 calendar days of training completion.
Part 135 Standardized Curriculum and Check Pilots
According to the FAA Standardized Curriculum guidelines and Federal Register Docket No. FAA-2021-0909, the Standardized Curriculum Concept is a voluntary framework that lets Part 142 training centers deliver nationally accepted, aircraft-specific training, testing, and checking to Part 135 commuter and on-demand operators.
In March 2020, the FAA tasked the Aviation Rulemaking Advisory Committee (ARAC) and its Training Standardization Working Group (TSWG) with developing standardized curricula for Part 135 pilot training and an Instructor/Check Pilot Qualification Curriculum. Once the FAA's Training and Simulation Group (AFS-280) accepts and publishes an aircraft-specific standardized curriculum at the national level, a Part 142 training center incorporates it into a Standardized Curriculum Package (SCP) and obtains authorization from its Training Center Program Manager (TCPM) via its Training Specifications (TSpecs).
Under this voluntary model, the Part 142 training center qualifies its own personnel as instructors and check pilots for the Part 135 standardized curriculum. This eliminates the need for individually issued check pilot letters of approval for every single Part 135 operator. If a Part 135 operator opts in and adopts the standardized curriculum, including its standard operating procedures (SOPs) and checklists, the operator's Principal Operations Inspector (POI) approves it in the operator's Operations Specifications (OpSpecs). If an operator prefers to use its own custom checklists and SOPs, it remains under the traditional customized training model and must track contract instructor and check pilot qualifications itself.
- Aircraft-Specific Ground Training and Systems under 14 CFR 135.345(b).
- Flight Training under 14 CFR 135.347, including standardized maneuvers, procedures, and functions under 14 CFR 135.327(b)(3).
- Pilot Testing on aircraft systems and weight and balance under 14 CFR 135.293(a)(2) and (3).
- Competency Checks under 14 CFR 135.293(b) and Instrument Proficiency Checks under 14 CFR 135.297.
- Instructor and Check Pilot Standardized Curriculum modules covering initial qualification, recurrent training every 12 calendar months, requalification, bridging for current Part 135 or Part 142 instructors/evaluators, and transition variables.
Curricula, Simulator Operating Rules, and Aircraft Standards
A Part 142 training program consists of courses, courseware, facilities, flight training equipment, and personnel. Under 14 CFR 142.3 and 142.37, each program application must specify which courses belong to its Core Curriculum (courses required for certification that do not include tasks unique to a single client) and which belong to its Specialty Curriculum (courses designed to satisfy regulatory requirements unique to one or more specific training center clients). If the FAA requires revisions to an approved training program and the center fails to make them within 30 calendar days, the FAA may suspend, revoke, or terminate the certificate.
Flight simulators and flight training devices at a Part 142 center must be specifically qualified and approved by the FAA for each maneuver, procedure, aircraft make, model, series, and curriculum (14 CFR 142.59). Training centers may request simulator evaluation and qualification without holding an air carrier certificate or having a specific relationship to an air carrier certificate holder. Furthermore, training centers cannot be restricted to specific route segments during line-oriented flight training scenarios or limited to visual databases replicating a single customer's base of operations.
When a Part 142 center conducts flight instruction in an actual aircraft rather than a simulator, 14 CFR 142.57 requires the aircraft to hold an FAA standard airworthiness certificate (or an acceptable foreign equivalent, except for agricultural, external-load, or similar aerial work courses), be maintained under Part 91 Subpart E and an approved maintenance program, and have at least two pilot stations with conventional, easily reached engine power and flight controls.
- Daily preflight and discrepancy log (14 CFR 142.59(c)): Every simulator and flight training device must receive a functional preflight check each day before use and maintain a discrepancy log where the instructor or evaluator enters every discrepancy at the end of each training session.
- No freeze or slow motion during tests (14 CFR 142.65(a)): A training center must ensure that simulator freeze, slow motion, or repositioning features are never used during testing or checking.
- Repositioning limit during LOFT (14 CFR 142.65(a)(2)): During line-operational simulation and line-oriented flight training, repositioning may be used only to advance along a flight route to the point where the descent and approach phase begins.
- Crewmember seat occupancy (14 CFR 142.65(b)): During flight testing, flight checking, or line-operational simulation, each crewmember position must be occupied by either a crewmember qualified in the aircraft category, class, and type (never the flight instructor giving instruction) or a student enrolled in the exact same specific course.
Checklist: Trainee Graduation, Recordkeeping, and Center Pilot Compliance
Whether you are completing a type rating at a Part 142 pilot center or preparing to work as a center instructor or evaluator, use this regulatory checklist to verify compliance with 14 CFR Part 142 Subpart D and Subpart E.
Under 14 CFR 142.65 and 142.73, a training center cannot graduate a student or recommend a trainee for a certificate or rating unless all curriculum requirements are completed and final tests are passed. The center must keep trainee records at the facility or satellite center where the training occurred for at least 1 year and provide a copy to the trainee upon request.
- Verify your trainee file contains all 7 items required by 14 CFR 142.73(a): (1) trainee name, (2) copy of pilot and medical certificates, (3) course name and equipment make/model, (4) prerequisite experience and course time completed, (5) performance on each lesson and the instructor's name, (6) date and result of each end-of-course practical test and the evaluator's name, and (7) hours of additional training accomplished after any unsatisfactory practical test.
- Request your personal copy: Under 14 CFR 142.73(e), ask the training center for a copy of your complete training record as soon as you finish your checkride so you have permanent documentation for future airline interviews.
- Check evaluator scheduling: If your curriculum leads to an airman certificate or rating, confirm the center has scheduled an approved TCE within 7 calendar days of your training completion (14 CFR 142.13(b)).
- Track instructor and evaluator files: If you work at a center, confirm your qualification records are maintained while you are employed and for 1 year thereafter, and that your annual recurrent proficiency records are retained for at least 1 year at your primary base (14 CFR 142.73(c) and (d)).
- Respect the 2-year FAA cooling-off rule: Under 14 CFR 142.14 and 141.34, verify that no person hired within the preceding 2 years who served as or oversaw a Flight Standards Service aviation safety inspector with direct inspection responsibility over the certificate holder acts as an agent or representative before the FAA.
Practice example
Tell me about a time during simulator training or a proficiency check at a Part 142 training center when you encountered an unexpected system malfunction or struggled with a procedure, and how you handled it.
Example answer, written by us. It is not a real applicant's story. During my initial type rating course at a Part 142 training center, my sim partner and I were flying a line-oriented flight training scenario when we experienced an uncommanded stabilizer trim runaway during our departure climb. In our first practice session earlier that week, I had been slow to call for the runaway stabilizer memory items because I was fixated on hand-flying the pitch change. Seeing the same indications start to develop, I immediately disconnected the autopilot, held firm control column pressure, used the main electric trim switch to oppose the runaway, and called for my pilot monitoring to cutout both stab trim switches and pull the checklist. After we stabilized the aircraft and entered a holding pattern to brief the approach, we logged the session and reviewed our crew coordination during the debrief. Because we knew simulator freeze and repositioning are prohibited during testing and checking under Part 142, we practiced managing the degraded pitch control all the way to touchdown so we were ready for our end-of-course evaluation.
This answer names a concrete training scenario, shows honest self-correction from an earlier lesson, and walks through clear crew coordination and memory items without blaming the simulator or the partner. It also shows practical awareness of Part 142 line-operational simulation and evaluation rules.
Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview
Frequently asked questions
What is a Part 142 pilot training center?
Under 14 CFR 142.3 and 142.1, a Part 142 training center is an FAA-certificated organization that provides contract training, testing, and checking to airmen as an alternative way to satisfy training requirements under 14 CFR Parts 61, 63, 65, 91, 121, 125, 135, or 137. Every Part 142 center must have exclusive access to at least one flight simulator or advanced flight training device.
How many hours a day can a Part 142 training center pilot instructor teach?
Under 14 CFR 142.49(c)(1), a training center may not allow an instructor to conduct more than 8 hours of instruction in any 24-consecutive-hour period. Pre-flight briefings and post-flight debriefings are excluded from that 8-hour limit.
What are the requirements to become a Part 142 training center instructor?
Under 14 CFR 142.47, an instructor must be at least 18 years old, be fluent in English, meet applicable commercial or ATP aeronautical experience requirements (plus Part 61 Subpart H and at least a second-class medical certificate if instructing as a required crewmember in flight), complete at least 8 hours of initial ground training, and pass a written test and annual proficiency check.
Can a Part 141 pilot school and a Part 142 pilot center work together?
Yes. Under 14 CFR 142.33 and 141.26, a Part 141 pilot school and a Part 142 training center may sign a formal agreement to provide training, testing, and checking for one another, provided the Part 141 school obtains FAA approval for the combined course outline and forwards student training records upon completion.
What is the Part 135 Standardized Curriculum at a Part 142 training center?
According to the FAA Standardized Curriculum FAQs, it is a voluntary, nationally accepted aircraft-specific training and checking curriculum that Part 142 centers can deliver to Part 135 operators. It allows the Part 142 center to qualify its own instructors and check pilots, eliminating the need for separate check pilot letters of approval for each individual Part 135 operator.
How long must a pilot training center keep trainee records?
Under 14 CFR 142.73(c)(1) and (e), a training center must maintain trainee records for at least 1 year following the completion of training, testing, or checking, and must provide a copy of those records to the trainee upon request.
Sources
- 14 CFR Part 142: Training Centers (eCFR)
- 14 CFR Part 141: Pilot Schools (eCFR)
- FAA Part 142 Training Centers Portal
- FAA Standardized Curriculum for Part 135 Training Provided by Training Centers FAQs
- FAA Pilot Schools Information
- Federal Register Notice: Proposed Standardized Curricula for Part 135 Delivered by Part 142 Training Centers