Commercial Pilot Certificate: Requirements, Flight Hours, and How to Get Certified

Short answer: A commercial pilot certificate is the Federal Aviation Administration (FAA) credential that authorizes a pilot to act as pilot in command of an aircraft for compensation or hire under 14 CFR Part 61 Subpart F. To get a commercial pilot certificate with an airplane rating, you must be at least 18 years old, hold a private pilot certificate, pass FAA knowledge and practical tests, and log at least 250 pilot flight hours under 14 CFR 61.129 (or 190 hours in an approved Part 142 course). Exercising commercial privileges in airplanes or rotorcraft also requires a valid FAA medical certificate and compliance with all applicable Title 14 operating rules.

What Is a Commercial Pilot Certificate? Privileges and Limits

Pilots searching for a commercial pilot certificate or commercial pilot license are looking for the FAA commercial pilot certificate governed by 14 CFR Part 61 Subpart F. Although everyday aviation conversations use the word license, the FAA issues airman certificates that mark the legal step from personal or shared-expense flying to paid aviation work.

Under 14 CFR 61.133(a)(1), holding a commercial pilot certificate lets you act as pilot in command (PIC) of an aircraft carrying persons or property for compensation or hire, or act as PIC for compensation or hire directly, provided you qualify under Part 61 and under all other parts of Title 14 Chapter I that apply to the flight. That condition is a primary oral-exam topic because a commercial pilot certificate grants pilot qualification rather than air-carrier authority. Before accepting compensation, you must verify whether the flight requires a separate operator certificate under Title 14 Chapter I.

Without an instrument rating in the same aircraft category and class, 14 CFR 61.133(b)(1) places a printed limitation on airplane and powered-lift commercial certificates prohibiting the carriage of passengers for hire on cross-country flights in excess of 50 nautical miles or at night. Earning the corresponding instrument rating under 14 CFR 61.65 removes that restriction. Separately, under 14 CFR 61.131, applicants who reside and train in Alaska may take the checkride before completing Subpart F night training and receive a certificate marked night flying prohibited. That certificate becomes invalid after 12 calendar months unless the pilot finishes the night training requirements and presents an instructor endorsement to an examiner.

Eligibility and Medical Requirements (14 CFR 61.123)

FAA examiners verify every eligibility item in 14 CFR 61.123 before starting the oral portion of your checkride. Alongside Part 61 prerequisites, FAA U.S. Civil Airmen Statistics rules state that all airplane and rotorcraft pilots must hold a valid medical certificate to exercise certificate privileges, whereas glider pilots do not require a medical examination. Aviation Medical Examiners (AMEs) issue medical certificates, with classes and duration windows governed by 14 CFR 61.23.

  • Age minimum: At least 18 years old under 14 CFR 61.123(a).
  • English proficiency: Read, speak, write, and understand English under 14 CFR 61.123(b), with FAA safety limitations permitted for medical exceptions.
  • Prerequisite certificate: Hold at least a Part 61 private pilot certificate, or meet military competence rules under 14 CFR 61.73.
  • Knowledge exam: Receive an instructor logbook endorsement for ground training or home study on 14 CFR 61.125 subjects and pass the knowledge test.
  • Flight proficiency and experience: Complete dual training on 14 CFR 61.127(b) areas of operation, meet all 14 CFR 61.129 hour minimums before applying, hold a practical-test endorsement, and pass the checkride.

Commercial Pilot Flight Hours: 14 CFR 61.129 Airplane Breakdown

Under 14 CFR 61.129(a) and (b), airplane single-engine and multiengine commercial applicants must log at least 250 hours of pilot flight time outside an approved Part 142 course, with nested minimums for powered aircraft, PIC, dual instruction, and solo or PIC-duties flights.

Under FAA Amendment 61-142 (effective June 27, 2018), single-engine applicants can log their 10 hours of advanced airplane training in a complex airplane, a turbine-powered airplane, a Technically Advanced Airplane (TAA), or any combination. Under 14 CFR 61.129(j), a TAA requires continuously visible displays consisting of an electronic Primary Flight Display (airspeed, turn coordinator, attitude, heading, altimeter, and vertical speed indicators), an electronic Multifunction Display with a GPS moving map showing aircraft position, and an integrated two-axis autopilot.

Choosing single-engine versus multiengine for your initial commercial checkride changes aircraft requirements directly. As shown below, the TAA option applies to single-engine 61.129(a)(3)(ii) training, whereas multiengine land applicants under 61.129(b)(3)(ii) must use a multiengine complex or turbine airplane and fly the class-specific dual and solo buckets in a multiengine airplane.

Commercial airplane aeronautical experience under 14 CFR 61.129(a) and (b)

Experience Bucket Single-Engine Initial (61.129(a)) Multiengine Initial (61.129(b)) Key Logbook Rule
Total Pilot Time 250 hours minimum 250 hours minimum 190 hours if completing an approved Part 142 course
Powered Aircraft 100 hours (50 in airplanes) 100 hours (50 in airplanes) Remaining hours may include gliders, lighter-than-air, or permitted simulator credit
Pilot in Command (PIC) 100 hours (50 in airplanes, 50 XC with 10 in airplanes) 100 hours (50 in airplanes, 50 XC with 10 in airplanes) The 10 solo or PDPIC hours under paragraph (4) may count toward this 100-hour PIC floor
Dual Instrument 10 hours (at least 5 in a single-engine airplane) 10 hours (at least 5 in a multiengine airplane) Requires a view-limiting device, attitude flying, partial panel, unusual attitudes, and navigation tracking
Advanced Airplane Dual 10 hours in complex, turbine, or TAA (or combination) 10 hours in multiengine complex or turbine (flaps and controllable prop/FADEC for seaplane) TAA satisfies single-engine 61.129(a)(3)(ii) only, not multiengine land 61.129(b)(3)(ii)
Dual Day and Night XCs One 2-hour day flight and one 2-hour night flight in single-engine One 2-hour day flight and one 2-hour night flight in multiengine Each flight must exceed 100 NM straight-line distance from original departure
Practical Test Prep 3 hours in a single-engine airplane 3 hours in a multiengine airplane Logged with an authorized instructor within the preceding 2 calendar months
Solo or PDPIC Time 10 hours solo or 10 hours PDPIC with instructor in single-engine 10 hours solo or 10 hours PDPIC with instructor in multiengine 300 NM 3-point XC (250 NM straight-line leg, 150 NM in Hawaii) plus 5 hrs night VFR with 10 towered pattern takeoffs/landings

Simulator Credit and Reduced-Hour Pathways

Under 14 CFR 61.129(i)(1)(i), pilots training outside a Part 142 center may credit up to 50 hours in a representative full flight simulator (FFS) or flight training device (FTD) with an authorized instructor toward an airplane or powered-lift commercial rating. By our calculation from 14 CFR 61.129, using all 50 simulator hours covers 20 percent of the 250-hour requirement and leaves 200 hours in actual aircraft.

Graduates of an approved commercial course at a Part 142 training center meet total airplane or powered-lift experience at 190 hours under 14 CFR 61.129(i)(3) unless fewer hours are FAA-approved, with up to 100 FFS or FTD hours permitted under paragraph (i)(2)(i). By our calculation from 14 CFR 61.129, the 190-hour Part 142 track cuts 60 hours, or 24 percent, off the 250-hour standard. At Part 141 schools, an Airman Certification Representative (ACR) can also process Integrated Airman Certification and Rating Application (IACRA) filings alongside Flight Standards District Offices (FSDOs), Designated Pilot Examiners (DPEs), and flight instructors.

Training Pathway Total Minimum Maximum FFS/FTD Credit Minimum Aircraft Hours
Part 61 Airplane or Powered-Lift 250 hours 50 hours 200 hours
Part 142 Course Airplane or Powered-Lift 190 hours (unless fewer approved) 100 hours 90 hours (unless fewer approved)
Part 61 Helicopter 150 hours 25 hours 125 hours
Part 142 Course Helicopter 150 hours 50 hours 100 hours

Knowledge Test Areas and ACS Checkride Standards

Under 14 CFR 61.125, commercial applicants complete instructor ground training or a home-study course across 16 aeronautical knowledge areas. Core regulatory and planning topics include commercial privileges and limitations, NTSB accident reporting, weight and balance, performance charts, exceeding performance limits, pilotage and dead reckoning, air navigation facilities, and National Airspace System procedures. Operational and safety topics cover aerodynamics, meteorology and windshear avoidance, safe aircraft operation, aeronautical decision making, aircraft systems, maneuvers and emergencies, night and high-altitude operations, and lighter-than-air training procedures where applicable. Check test durations in the ACS Knowledge Test Table: Correct Allotted Times and review the ACS Companion Guide for Pilots (FAA-G-ACS-2) before testing.

Examiners evaluate checkrides under Commercial Pilot for Airplane Category (FAA-S-ACS-7B), published April 2024 and effective May 31, 2024, which you can compare directly against Private Pilot for Airplane Category (FAA-S-ACS-6C) on the FAA testing portal. Helicopter checkrides use FAA-S-ACS-16, powered-lift checkrides use FAA-S-ACS-2, and military competence applicants use FAA-S-ACS-12 (effective October 15, 2018).

How to Get a Commercial Pilot Certificate: 6-Step Plan and Audit

Knowing how to get a commercial pilot certificate without checkride delays means sequencing your cross-country flights early and auditing every logbook line before meeting an examiner. Checkride discontinuances can happen before engine start if a distance measurement or endorsement falls short of 14 CFR 61.129. Use this six-step plan and audit checklist written by our team to prepare.

  • Step 1, Confirm prerequisites and medical status: Verify your Part 61 private certificate (or 14 CFR 61.73 eligibility), confirm medical requirements under 14 CFR 61.23 with an AME, and plan your 14 CFR 61.65 instrument rating to avoid the 50-NM and night passenger restriction.
  • Step 2, Pass the knowledge test: Complete ground training or home study on all applicable 14 CFR 61.125(b) topics, secure your 14 CFR 61.123(c) endorsement, and pass the written exam.
  • Step 3, Keep solo and PDPIC separate: Under 14 CFR 61.129(a)(4) and (b)(4), log either 10 hours solo OR 10 hours performing the duties of PIC (PDPIC) with an instructor. Do not mix solo and PDPIC flights to reach 10 hours.
  • Step 4, Measure straight-line distances: Verify both 2-hour dual day and night cross-countries exceed 100 NM straight-line distance from original departure, and confirm your 300-NM solo or PDPIC flight lands at 3 points with one point at least 250 NM straight-line distance from original departure (150 NM in Hawaii).
  • Step 5, Audit tower hours and instrument tasks: Confirm the control tower was operating during all 10 night VFR pattern takeoffs and landings, and verify your 10 dual instrument hours explicitly record a view-limiting device, 5 hours in class, attitude flying, partial panel, unusual attitudes, and navigation tracking.
  • Step 6, Finalize 2-month prep and IACRA: Log 3 hours of test prep in class within the preceding 2 calendar months, check instructor signoffs against Advisory Circular 61.65, and match your IACRA or paper Form 8710-1 totals to your logbook.

Other Aircraft Categories and EASA Conversion Rules

Outside airplanes, 14 CFR 61.129(c) through (h) sets specific experience minimums for rotorcraft, powered-lifts, gliders, airships, and balloons. Under 14 CFR 61.133(a)(2), commercial airship and balloon ratings include flight and ground instruction privileges in class, while 14 CFR 61.133(b)(2) and (3) restrict balloonists to airborne-heater or gas balloons based on their test aircraft until they log experience and an instructor endorsement for the other type.

For pilots flying internationally, the EU-US Bilateral Aviation Safety Agreement (BASA) Annex 3 signed November 19, 2020 and its Technical Implementation Procedures for Licensing cover Private Pilot Licences only. Under European Union Aviation Safety Agency (EASA) rules, FAA commercial and airline transport certificates are excluded from BASA and require third-country conversion through a Member State National Competent Authority under Regulation (EU) No 1178/2011 and Commission Delegated Regulation (EU) 2020/723. Under EASA Flight Crew Explanatory Notes, transitioning pilots also follow differences training or familiarization rules across single-engine piston (SEP), multi-engine piston (MEP), single-engine turbine (SET), and touring motor glider (TMG) class ratings.

Non-airplane commercial minimums under 14 CFR 61.129(c) through (h)

Category and Class Minimum Total Time Minimum PIC Time Key Dual and Solo/PDPIC Rules
Helicopter (61.129(c)) 150 hours 100 hours (35 helicopter, 10 helicopter XC) 20 dual (5 instrument, 2-hr day and night XCs more than 50 NM) plus 10 solo/PDPIC (3-point 50 NM XC, 5 hrs night VFR)
Gyroplane (61.129(d)) 150 hours (up to 5 in FFS/FTD) 100 hours (10 gyroplane, 3 gyroplane XC) 20 dual (2.5 instrument, 2-hr day XC more than 50 NM, 2 hrs night with 10 full-stop landings) plus 10 solo/PDPIC
Powered-Lift (61.129(e)) 250 hours (190 in Part 142 course) 100 hours (50 powered-lift, 50 XC with 10 powered-lift) 20 dual (10 instrument with 5 powered-lift, 2-hr day and night XCs more than 100 NM) plus 10 solo/PDPIC
Glider Track 1 (61.129(f)(1)) 25 glider hours 100 glider flights as PIC 3 hours or 10 dual flights (3 prep flights in 2 months) plus 2 hours solo including 10 solo glider flights
Glider Track 2 (61.129(f)(2)) 200 heavier-than-air hours 20 glider flights as PIC 3 hours or 10 dual glider flights (3 prep flights in 2 months) plus 5 solo glider flights
Airship (61.129(g)) 200 hours (50 in airships) 30 hours PIC or PDPIC in airships (10 XC, 10 night) 40 instrument hours (20 in flight, 10 in airships), 20 dual (1-hr day and night XCs more than 25 NM), plus 10 PDPIC
Balloon (61.129(h)) 35 hours (20 hours and 10 flights in balloons) 2 balloon flights as PIC 10 hours and 10 dual flights, controlled ascent to 5,000 ft (gas) or 3,000 ft (airborne heater)

Practice example

During your checkride oral exam or a pilot interview, you are asked: What can you legally do with a commercial airplane certificate if you lack an instrument rating, and does your pilot certificate alone authorize any paid flight?

Example answer, written by us. It is not a real applicant's story. Under 14 CFR 61.133(a)(1), my commercial pilot certificate allows me to act as pilot in command of an airplane for compensation or hire, including carrying persons or property for hire, only when I am qualified under Part 61 and under every other part of Title 14 Chapter I that governs that specific operation. Pilot certification and operator certification are separate legal requirements, so before accepting payment I must confirm that the flight complies with applicable Title 14 operating rules rather than assuming my pilot certificate covers an air-carrier flight. In addition, without an instrument rating in the same airplane category and class, 14 CFR 61.133(b)(1) places a printed restriction on my certificate prohibiting me from carrying passengers for hire on cross-country flights beyond 50 nautical miles or at night until I earn that rating under 14 CFR 61.65.

This response cites both parts of 14 CFR 61.133 accurately: operator-level compliance under paragraph (a)(1) and the 50-nautical-mile and night passenger limits under paragraph (b)(1). Examiners and interview panels look for pilots who separate personal certificate privileges from operator authority.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

What is a commercial pilot certificate?

Under 14 CFR 61.121 and 61.133, a commercial pilot certificate is an FAA airman credential that authorizes a pilot to act as pilot in command of an aircraft for compensation or hire, provided the pilot meets Part 61 rules and all Title 14 rules governing the operation.

How to get commercial pilot certificate approval under FAA rules?

Whether you search for commercial certificate pilot requirements or how to get a commercial pilot certificate, 14 CFR 61.123 sets the same steps. You must be at least 18, read, speak, write, and understand English, hold at least a private pilot certificate, pass the knowledge exam, log required flight training and 14 CFR 61.129 hours, and pass the ACS checkride.

How many flight hours do you need for a commercial pilot certificate?

Under 14 CFR 61.129, single-engine airplanes, multiengine airplanes, and powered-lifts require at least 250 pilot flight hours, or 190 hours in an approved Part 142 course. Helicopters and gyroplanes require 150 hours, airships require 200 hours, balloons require 35 hours, and gliders require 25 glider hours with 100 PIC flights (or 200 heavier-than-air hours with 20 PIC glider flights).

Can you get a commercial pilot certificate without an instrument rating?

Yes, though 14 CFR 61.133(b)(1) places a limitation on airplane and powered-lift certificates if you lack an instrument rating in the same category and class. You cannot carry passengers for hire on cross-country flights in excess of 50 nautical miles or at night until you earn that instrument rating.

What qualifies as a Technically Advanced Airplane (TAA)?

Under 14 CFR 61.129(j), a TAA has continuously visible electronic Primary Flight Display and Multifunction Display screens (including a GPS moving map with aircraft position) plus an integrated two-axis autopilot, and can satisfy all 10 advanced training hours for a single-engine commercial rating.

Can I convert an FAA commercial pilot certificate directly to an EASA CPL under BASA?

No. EASA specifies that EU-US BASA Annex 3 applies only to Private Pilot Licences, so FAA commercial pilots must complete standard EU third-country conversion through a Member State National Competent Authority.

Sources