Commute Airline: FAA Rules, Aircraft Limits, and CommuteAir Explained

Short answer: A commute airline, officially classified as a commuter air carrier under 14 CFR Part 298, is an operator that flies at least 5 scheduled passenger round trips per week on at least one route using small aircraft designed for 60 passenger seats or fewer. Under Federal Aviation Administration (FAA) operational rules in 14 CFR Part 135, commuter authority applies to propeller airplanes with 9 passenger seats or fewer and rotorcraft, while larger scheduled airplanes operate under 14 CFR Part 121. Many pilots searching for a commute airline also have CommuteAir in mind as a career goal, though that name refers to one specific regional airline rather than the federal commuter air carrier category.

CommuteAir vs. a Commuter Airline: Two Different Meanings

People searching for a commute airline or commute airlines usually mean one of two things. The first is the federal aviation category called a commuter air carrier. Under U.S. Department of Transportation (DOT) and FAA rules, commuter carriers fly short-haul scheduled passenger routes linking regional airports to larger hubs.

The second is CommuteAir, a named U.S. regional carrier that many pilots target as an interview or career goal. Because regional jet airlines operate larger scheduled aircraft under 14 CFR Part 121 rather than small-aircraft commuter rules, preparing for a regional airline interview involves different regulatory rules than preparing for a Part 135 commuter operator.

That distinction also determines how scheduled flights are regulated and marketed. Under 14 CFR 298.36, independent commuter air carriers under 14 CFR Part 298 hold out to the public and perform scheduled flights directly under the names on their FAA air carrier certificates and DOT Commuter Air Carrier Authorizations.

DOT Part 298 vs. FAA Part 135: Seat and Weight Limits

Federal law sets two different aircraft limits for a commute airline under Title 14 of the Code of Federal Regulations (with DOT Part 298 Subpart E rules as amended April 16, 2019, and the annual CFR edition dated January 1, 2026). The DOT regulates economic and scheduling authority under 14 CFR Part 298, while the FAA regulates safety, maintenance, and flight crews under 14 CFR Part 135 and Part 121.

Under 14 CFR 298.2 and 298.3(b), a DOT commuter air carrier holds no certificate of public convenience and necessity, carries passengers on at least 5 round trips per week on at least one route per published schedules specifying times, days, and places, and uses only small aircraft designed for 60 seats or fewer or a maximum payload of 18,000 pounds or less. Before starting scheduled service, it must prove it is fit, willing, and able, maintain Part 205 liability insurance, file OST Form 4523, and apply for a Commuter Air Carrier Authorization with a $670 filing fee (ecfr.gov, as of January 2026). Under 14 CFR 298.2 and 298.32, this DOT fitness review and Commuter Air Carrier Authorization strictly govern scheduled service to an eligible place under 49 U.S.C. Chapter 417, the federal small-community air service statute that includes the Essential Air Service framework connecting smaller communities to the national air network, ensuring no commuter carrier serves an eligible place without proven operational and financial fitness. Operators flying on-demand or fewer than 5 scheduled weekly round trips classify as air taxi operators, registering at least 30 days ahead on OST Form 4507 with an $8 registration filing fee (ecfr.gov, as of January 2026).

FAA Part 135 commuter limits are much tighter. Under 14 CFR 135.2, scheduled passenger operators flying nontransport category turboprops (type certificated after December 31, 1964) with 10 to 19 seats, transport category turboprops with 20 to 30 seats, or turbojets with 1 to 30 seats had to move scheduled flights to 14 CFR Part 121 on or before March 20, 1997. Per FAA Part 135 certification guidance (last updated May 11, 2023), Part 135 commuter operations are restricted to non-turbojet airplanes with a maximum passenger-seating configuration of 9 seats and a 7,500-pound payload capacity, or any rotorcraft.

For aircraft without an FAA-prescribed maximum zero fuel weight, 14 CFR 298.2 calculates maximum payload by subtracting empty weight, justifiable equipment, and an operating load of 200 pounds per required crewmember, 350 pounds of oil, and minimum VFR fuel for a 200-statute-mile domestic flight from maximum certificated takeoff weight. By our calculation from 14 CFR 298.2, a two-pilot commuter airplane carries a fixed crew-and-oil deduction of 750 pounds (400 pounds for two required pilots plus 350 pounds of oil) before fuel, versus 550 pounds for a single-pilot airplane.

Federal commuter and air taxi thresholds in the U.S.

Classification Rule Published Schedule Rule Airplane Seat Cap Payload Cap Turbojets Permitted
DOT Air Taxi Operator Part 298 On-demand or under 5 weekly round trips 60 seats or fewer 18,000 lbs or less Yes, within small aircraft limits
DOT Commuter Air Carrier Part 298 At least 5 weekly round trips on 1 or more routes 60 seats or fewer 18,000 lbs or less Yes, under Part 121 safety rules
FAA Part 135 On-Demand Part 135 On-demand, or under 5 weekly round trips in 9-seat non-jets 30 seats or fewer 7,500 lbs On-demand only, barred on scheduled flights
FAA Part 135 Commuter Part 135 Unlimited scheduled and on-demand flights 9 seats or fewer 7,500 lbs No turbojet aircraft allowed
FAA Part 121 Regional Part 121 Scheduled passenger service 10 or more seats, or 1 or more in turbojets Part 25 and Part 121 limits Yes

The Four Scopes of FAA Part 135 Certificates

The FAA issues two Part 135 certificate types by geography: an Air Carrier Certificate for interstate, foreign, or overseas flights or carrying mail, and an Operating Certificate for intrastate flights wholly within one U.S. state. Under 14 CFR 135.25, every Part 135 operator must have exclusive use of at least one compliant aircraft via ownership or a written agreement providing sole possession, control, and maintenance arrangements for at least 6 consecutive months.

Through Operations Specifications (OpSpecs), the FAA also authorizes four operational scopes. Single Pilot operators (OpSpec A040) name 1 pilot, generally need no manuals or formal Directors of Operations or Maintenance, and must still designate operational control officials and provide Hazardous Materials training. Single Pilot in Command (PIC) operators (OpSpec A039) name 1 PIC and up to 3 Second in Command (SIC) pilots. By our calculation from FAA Part 135 certification guidance, OpSpec A039 caps the roster at 4 named pilots in fixed duty seats, 1 pilot below the 5-pilot ceiling of 135 Basic, while Standard Part 135 sets no preset caps.

Four FAA Part 135 operator scopes compared

Part 135 Scope Authorized Pilots Fleet Cap Airplane Seat Cap Geographic & Approach Limits
Single Pilot (OpSpec A040) 1 named pilot Single pilot only 9 seats or fewer for commuter Authorized per OpSpecs
Single PIC (OpSpec A039) 1 PIC and up to 3 SICs Not preset Type certificated for 9 seats or fewer U.S., Canada, Mexico, Caribbean, no Cat II or III
135 Basic At most 5 pilots At most 5 aircraft, 3 types Type certificated for 9 seats or fewer U.S., Canada, Mexico, Caribbean, no Cat II or III
Standard Part 135 No preset limit No preset limit 9 seats commuter, 30 seats on-demand Authorized per OpSpecs upon qualification

Flight Crew Qualifications, Staffing, and Performance Rules

Multiengine scheduled commuter flying triggers airline-level pilot licensing even in 9-seat airplanes. Under 14 CFR 135.243(a), serving as PIC of a multiengine airplane in a commuter operation, any turbojet airplane, an airplane with 10 or more passenger seats (excluding crew seats), or a scheduled interstate passenger helicopter in the 48 contiguous states requires an Airline Transport Pilot (ATP) certificate with appropriate category, class, and type ratings. Under 14 CFR 135.3(b), when a Part 135 commuter airplane requires two pilots under type certification rules, pilot training follows Part 121 Subparts N and O instead of Part 135 Subparts E, G, and H, though SICs may meet 14 CFR 135.245 instead of 14 CFR 121.436.

Under 14 CFR Part 135, single-pilot commuter operations using an operative approved autopilot system authorized by operations specifications require at least 100 hours of PIC flight time in that make and model of aircraft. Under 14 CFR 135.244, a commuter PIC must first complete operating experience in flight during commuter passenger-carrying operations in that make and basic model, though proving flights or ferry flights may count when an aircraft is newly introduced to the certificate holder's Part 135 operations.

Under 14 CFR 135.398, commuter category airplanes must comply with the takeoff weight limitations in the approved Airplane Flight Manual and limit takeoff weight so the net takeoff flight path clears all obstacles by at least 35 feet vertically, or 200 feet horizontally within airport boundaries and 300 feet horizontally outside.

Booking, Baggage Notices, and Passenger Protections

Under 14 CFR 298.36, an independent Part 298 commuter air carrier holds out to the public and sells air transportation only in the business name listed on its FAA air carrier certificate and DOT Commuter Air Carrier Authorization, or another registered trade name. Where a commuter carrier offers through service on joint tariffs with a certificated air carrier under 14 CFR 298.11, both carriers must observe the joint rates, classifications, and rules filed for that itinerary.

Under 14 CFR 298.2, travelers redeeming loyalty points, flying on corporate or government preferential fares, or using denied-boarding compensation vouchers count as revenue passengers. Under 14 CFR 298.30, every commuter air carrier and air taxi must continuously display a readable sign at each U.S. counter stating its baggage liability and denied-boarding compensation policies. If a ticket includes a flight segment on a large aircraft (more than 60 seats), the carrier must also include a written baggage liability notice on or with the ticket, which overrides the counter sign if the terms differ. Under Part 298 wet-lease and charter rules, carriers cannot misrepresent who holds operational control, and charterers must receive timely operator-change disclosures or a full refund option.

Pilot Interview Prep Plan for Commuter and Regional Airlines

Whether your goal is a Part 135 commuter operator or a Part 121 regional carrier like CommuteAir, interview panels test how cleanly you apply federal rules to real cockpit choices. Use this five-step checklist from our team in the two weeks before your interview.

  • Confirm the operator's certificate first: Check whether the airline flies 9-seat non-turbojet airplanes under Part 135 commuter authority, up to 30-seat airplanes under Part 135 on-demand authority, or regional jets under Part 121.
  • Lock in the Part 135 crew rules: Review the multiengine commuter ATP requirement, the 100-hour PIC single-pilot autopilot rule, and the in-flight commuter operating experience requirement with its proving and ferry flight exception.
  • Rehearse performance and obstacle scenarios out loud: Practice walking a captain through Airplane Flight Manual weight limits and the 35-foot vertical or 200-foot and 300-foot horizontal takeoff obstacle margins.
  • Prepare several real first-person stories: Choose honest examples from your own flying or customer service background covering weather diversions, maintenance write-ups, and crew coordination without scripted answers.
  • Audit your logbooks and stop rambling: Verify PIC totals, instrument currency, medical dates, and work history against background records, state the conservative line decision, and stop talking once you answer the question.

Keeping Technical and Behavioral Answers Grounded

Short-haul commuter flying means multiple daily legs into smaller airports with fast turnarounds and close passenger interaction. When answering technical or scenario questions, name the exact rule, explain the safe operational choice you made or would make, and practice telling your own stories out loud so follow-up questions feel natural.

Practice example

During a Part 135 multiengine commuter interview, the chief pilot asks: We are adding a 9-seat twin-engine turboprop to our scheduled commuter routes, and you are upgrading to pilot in command. What FAA pilot certificate and operating experience rules apply before your first unsupervised revenue flight?

Example answer, written by us. It is not a real applicant's story. Because this is a multiengine airplane flown in a scheduled commuter operation under 14 CFR Part 135, 14 CFR 135.243(a) requires me to hold an Airline Transport Pilot certificate with the appropriate airplane category and multiengine class ratings, plus a type rating if the aircraft requires one, even though the cabin has only 9 passenger seats. Before serving as pilot in command, 14 CFR 135.244 requires me to complete operating experience on that specific make and basic model while performing pilot in command duties. Under Part 135, that operating experience must be acquired in flight during commuter passenger-carrying operations. However, because this aircraft has not been previously used by the certificate holder in Part 135 operations, 14 CFR 135.244 allows me to acquire that required operating experience during proving flights or ferry flights in the aircraft before carrying revenue passengers.

This answer cites the exact 14 CFR sections instead of guessing from seat count, showing the panel you know multiengine commuter flying requires an ATP below 10 seats. It also catches the proving or ferry flight exception for an aircraft newly introduced to the operator's Part 135 certificate.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

Is CommuteAir the same thing as a commuter airline?

No. CommuteAir is the name of one specific U.S. regional airline that pilots may target as a career goal, whereas a commuter airline, defined as a commuter air carrier in 14 CFR Part 298, is any carrier flying at least 5 scheduled passenger round trips weekly in small aircraft of 60 seats or fewer.

How many passenger seats can an FAA Part 135 commuter airplane have?

Under FAA Part 135 certification rules, commuter airplane operations are capped at 9 passenger seats and a 7,500-pound payload capacity, with turbojets prohibited. Scheduled passenger airplanes with 10 or more seats or turbojet engines operate under 14 CFR Part 121 following the March 20, 1997 transition rule in 14 CFR 135.2.

Do pilots need an ATP certificate to fly for a Part 135 commute airline?

Yes, for multiengine airplanes. Under 14 CFR 135.243(a), the pilot in command must hold an Airline Transport Pilot certificate for any multiengine commuter airplane, any turbojet airplane, or any airplane with 10 or more passenger seats.

How do tickets and baggage policies work on commuter airlines?

Under 14 CFR 298.36 and 298.30, 14 CFR Part 298 commuter air carriers sell tickets under their own FAA-certificated and DOT-registered names and must display baggage liability and denied-boarding compensation signs at every U.S. ticket desk. When a ticket includes a flight segment on a large aircraft with more than 60 seats, the carrier must also provide a written baggage liability notice on or with the ticket.

Sources