Delta Airline Assessment Test: Federal Pilot Screening, ATP Testing, and Interview Prep

Short answer: Preparing for a Delta airline assessment test and pilot screening involves two parts: the airline's internal selection steps (which you confirm in your invitation email) and mandatory federal evaluations under 14 CFR Part 61 and Part 111. Under 14 CFR 61.159, an unrestricted Airline Transport Pilot certificate requires at least 1,500 hours of total pilot time, and 14 CFR 111.105 prohibits any Part 121 air carrier from letting you begin service until it evaluates your FAA Pilot Records Database file.

How airline assessment testing and federal screening fit together

When pilots search for a Delta airline assessment test or a Delta Airlines assessment test, they are usually preparing for two distinct hurdles. The first is the carrier's own candidate screening, which you verify directly from your recruiting invitation email. The second is the federal testing and background evaluation that every Part 121 air carrier must complete before a pilot can enter training or fly the line.

Regardless of your target airline, federal regulations set the baseline for every commercial pilot assessment. Before you sit for an airline panel or technical screening, you must satisfy the Airline Transport Pilot (ATP) knowledge and practical testing rules under 14 CFR Part 61 Subpart G, and your complete training, checking, and employment history must clear the FAA Pilot Records Database (PRD) evaluation under 14 CFR Part 111.

Because every checkride outcome, employer comment, and knowledge test prerequisite is governed by federal rules, understanding what an airline reviewing entity sees in your FAA file is the best way to prepare for both technical evaluations and behavioral interview questions.

FAA Pilot Records Database (PRD) evaluation requirements

Under 14 CFR 111.105, no Part 121, Part 125, or Part 135 reviewing entity may permit an individual to begin service as a pilot until the carrier has evaluated all relevant information in the FAA Pilot Records Database. Beginning on September 9, 2024, the Pilot Records Improvement Act (PRIA) ceased to be effective and is no longer an available alternative to the PRD (14 CFR 111.5). The FAA maintains a pilot's records in the PRD for the life of the pilot, as explained in Advisory Circular 120-68J and 14 CFR 111.40.

When you grant an airline access to your PRD file during pre-employment screening, the carrier's responsible person or authorized user is required by 14 CFR 111.105 and 111.135 to evaluate specific federal and employer records:

  • Current pilot and medical certificate information, including associated type ratings and any limitations to those certificates and ratings (14 CFR 111.135).
  • Records maintained by the FAA Administrator concerning any failed attempt to pass a practical test required to obtain a certificate or type rating under 14 CFR Part 61.
  • Unoverturned FAA enforcement actions resulting in a finding of a violation of Title 49 of the United States Code or a regulation or order issued under that title.
  • Records related to acting as pilot in command (PIC) or second in command (SIC) during an aviation accident or incident.
  • Pre-employment and Department of Transportation (DOT) drug and alcohol testing history, including verified positive drug test results, alcohol misuse violations with confirmed results of 0.04 or greater, and refusals to submit to testing.
  • Employer-reported training, qualification, and proficiency records, including check pilot or evaluator comments and the specific tasks or maneuvers considered unsatisfactory (14 CFR 111.225).
  • Final disciplinary action records pertaining to pilot performance and final separation from employment records (14 CFR 111.230 and 111.235).

Your responsibilities: PRD portal access and driving record consent

An airline cannot pull your PRD file on its own. Under 14 CFR 111.120 and 111.310, no reviewing entity may retrieve your PRD records before receiving your documented written consent. To register for access to the FAA PRD Pilot User Portal, you must hold a Commercial, ATP, or Remote pilot certificate and a valid FAA medical certificate. Private pilots cannot access the PRD system.

Timing matters when an assessment or interview invitation arrives. Under 14 CFR 111.305, you must submit your application for electronic access to the PRD at least 7 days before you seek to access the database. In addition, starting mid-November 2026, the FAA automatically disables PRD user accounts after 365 days of inactivity. To prevent account deactivation, you must log in at least once a year.

When you provide written consent for an airline to review your PRD record, 14 CFR 111.310 requires you to affirm that your employment history for the 5 years preceding the date of consent is accurate and complete. If it is incomplete, you must update your history to list all past employers.

You must also provide separate written consent for a National Driver Register (NDR) search of your State motor vehicle driving records under 14 CFR 111.110 and 111.310. If the NDR search indicates that records exist in any State, the airline must request those driving records from the chief driver licensing official of each identified State. Under 14 CFR 111.120, you have the right to request a copy of any State motor vehicle driving records the airline obtained, and the carrier must provide them to you within 30 days of receiving your request.

  • If you spot an error, report it under 14 CFR 111.320. A reporting entity must correct an identified inaccuracy within 10 days or initiate dispute resolution within 30 days (14 CFR 111.250).
  • At least 7 days before granting consent: Submit your electronic access application under 14 CFR 111.305 if you do not yet have a portal account, including your full name as it appears on your pilot certificate, FAA certificate number, mailing address, phone number, and email address.
  • On the day you grant consent: Verify that your preceding 5-year employment history is complete, submit your PRD release, and sign the specific NDR driving record consent.

FAA ATP Certification Training Program (ATP CTP) and knowledge test rules

Written and technical assessments at the airline level build directly on the aeronautical knowledge standards of 14 CFR Part 61 Subpart G. Under 14 CFR 61.153, before you can apply for the multiengine airplane ATP knowledge test, you must receive a graduation certificate from an authorized training provider under Part 121, 135, 141, or 142 certifying completion of the Airline Transport Pilot Certification Training Program (ATP CTP) specified in 14 CFR 61.156.

Under 14 CFR 61.156, the ATP CTP requires at least 30 hours of academic classroom instruction and at least 10 hours of training in a flight simulation training device (FSTD). By our calculation from 14 CFR 61.156, the minimum combined instructional time for the ATP CTP is 40 hours (75 percent classroom instruction and 25 percent FSTD training), and the 14 hours of air carrier operations instruction make up 46.7 percent of the required classroom hours.

Once you graduate from the ATP CTP, you must pass the aeronautical knowledge test under 14 CFR 61.155(c) and the practical test covering normal and abnormal procedures across eight areas of operation under 14 CFR 61.157(e)(2): preflight preparation, preflight procedures, takeoffs and landings, in-flight maneuvers, stall prevention, instrument procedures, emergency operations, and postflight procedures.

Minimum ATP CTP training hours under 14 CFR 61.156

Training phase Subject area or simulator level Minimum hours
Academic classroom (30 hours total Technical Requirement ) Aerodynamics including high altitude operations 8 hours
Academic classroom Meteorology, adverse weather, and weather detection systems 2 hours
Academic classroom Air carrier operations (physiology, MEL/CDL, performance, automation, turbine engines ) 14 hours
Academic classroom Leadership, professional development, CRM, and safety culture 6 hours
FSTD training (10 hours total ) Level C or higher full flight simulator (40,000 pounds or greater max takeoff weight ): stalls, upset recovery, adverse weather 6 hours
FSTD training Level 4 or higher FSTD: navigation, FMS, and autoflight automation Up to 4 hours

ATP and Restricted ATP (R-ATP) flight hour minimums

Your eligibility for an airline pilot assessment also depends on meeting the age and aeronautical experience minimums in 14 CFR 61.153, 61.159, and 61.160. For an unrestricted ATP certificate under 14 CFR 61.159, you must be at least 23 years of age and hold at least 1,500 hours of total time as a pilot. For a restricted privileges ATP (R-ATP) certificate under 14 CFR 61.160, you must be at least 21 years of age.

Under 14 CFR 61.160, qualified applicants can apply for a multiengine airplane R-ATP with reduced total pilot time and a reduced cross-country requirement of 200 hours, provided they meet all other category and class requirements of 14 CFR 61.159. By our calculation from 14 CFR 61.159 and 61.160, the 200-hour cross-country floor for an R-ATP reduces the standard 500-hour cross-country requirement by 300 hours (a 60 percent reduction), while the military total-time requirement of 750 hours represents a 50 percent reduction from the standard 1,500-hour rule.

Airplane category ATP and R-ATP minimum aeronautical experience (14 CFR 61.153, 61.159, and 61.160 )

Pathway Minimum age Total pilot time Cross-country time Night time Instrument time Airplane PIC (or supervised SIC ) time
Unrestricted ATP (14 CFR 61.159 ) 23 years 1,500 hours 500 hours 100 hours 75 hours 250 hours (with 100 cross-country and 25 night )
U.S. military pilot R-ATP (14 CFR 61.160(a ) ) 21 years 750 hours 200 hours 100 hours 75 hours 250 hours
Bachelor's degree with aviation major, 60 aviation credits (14 CFR 61.160(b ) ) 21 years 1,000 hours 200 hours 100 hours 75 hours 250 hours
Associate's degree or Bachelor's with 30 to 59 aviation credits (14 CFR 61.160(c )-(d ) ) 21 years 1,250 hours 200 hours 100 hours 75 hours 250 hours
1,500-hour pilot with reduced cross-country R-ATP (14 CFR 61.160(f ) ) 21 years 1,500 hours 200 hours 100 hours 75 hours 250 hours

Simulator, night, and flight engineer credits under 14 CFR 61.159

When auditing your logbooks before an assessment, pay close attention to how simulator and non-PIC hours are credited under 14 CFR 61.159. Not more than 100 hours of the total aeronautical experience requirements of 14 CFR 61.159(a) or 61.160 may be obtained in a full flight simulator or flight training device representing an airplane as part of an approved training course under Parts 121, 135, 141, or 142.

Within the specific hour categories, 14 CFR 61.159 sets strict sub-limits on credited time:

  • Class of airplane time: You need at least 50 hours of flight time in the class of airplane for the rating sought. A maximum of 25 hours of training in a full flight simulator representing that class of airplane may be credited if accomplished in an approved Part 121, 135, 141, or 142 course. A flight training device or aviation training device may not be used to satisfy this 50-hour requirement.
  • Instrument flight time: Out of the required 75 hours of actual or simulated instrument time, you may credit no more than 25 hours of simulated instrument time in a full flight simulator or flight training device, or up to 50 hours if the training was accomplished in a course conducted by a Part 142 certificated training center.
  • Night takeoff and landing substitution: If you have performed at least 20 night takeoffs and landings to a full stop, you may substitute each additional night takeoff and landing to a full stop for 1 hour of night flight time toward the 100-hour night requirement, up to a maximum credit of 25 hours.
  • Flight engineer credit: A commercial pilot may log flight engineer time acquired in Part 121 operations or as a U.S. Armed Forces flight engineer crewmember toward the 1,500-hour total time requirement at a rate of no more than 1 hour for each 3 hours of flight engineer flight time, up to a maximum total credit of 500 hours.

What cannot be reported to the PRD and how to dispute errors

Knowing what is excluded from your PRD file helps you understand the boundaries of an airline's record check. Under 14 CFR 111.225(b), no person may report records related to flight time, duty time, and rest time, records demonstrating compliance with physical examination requirements or any other protected medical records, or records documenting recent flight experience.

Furthermore, under 14 CFR 111.245, no person may report any pilot record for inclusion in the PRD that was reported by an individual as part of an approved Voluntary Safety Reporting Program (such as ASAP) for which the FAA has designated reported information as protected under 14 CFR Part 193. Similarly, under 14 CFR 111.240, while an operator must document in the PRD within 45 days of a pilot's PRD date of hire that it completed the National Driver Register search, no operator may report any substantive information from State motor vehicle driving records into the PRD.

Under 14 CFR 111.230 and 111.235, employers are also prohibited from reporting any disciplinary action or separation from employment record that was subsequently overturned because the event prompting the action did not occur or the pilot was not at fault, as determined by a documented agreement between the employer and the pilot or by the official and final decision of an employment dispute panel or court of law. If a previously reported record is overturned, the reporting entity must correct the pilot's PRD record within 10 days.

Air carriers also had to upload historical PRIA records to the PRD under 14 CFR 111.255. Part 121 and Part 135 air carrier certificate holders were required to report historical records dating from August 1, 2005, until June 10, 2022, while Part 121, 125, and 135 operating certificate holders and Part 91K operators reported records from August 1, 2010, until June 10, 2022. Compliance for historical records dating on or after January 1, 2015, was required by June 12, 2023, and compliance for records before January 1, 2015, was required by September 9, 2024.

How to prepare for technical and behavioral questions on your PRD and ATP subjects

Airlines warn against coached or memorized answers, so your goal is to practice telling your own stories clearly and accurately. When an interview panel reviews your PRD file alongside your aeronautical knowledge results, they look for consistency between the official record and how you explain your flight history out loud.

Focus your preparation on the 14 aeronautical knowledge areas listed in 14 CFR 61.155(c) and the core air carrier subjects in 14 CFR 61.156(a), including windshear and microburst awareness, high altitude aerodynamics, minimum equipment lists (MEL) and configuration deviation lists (CDL), operational control, transport category aircraft performance, and crew resource management (CRM).

If your PRD file contains an unsatisfactory training event under 14 CFR 111.225 or a practical test failure under 14 CFR 111.135(b), remember that the evaluator's comments and the specific unsatisfactory maneuvers are visible to the hiring panel. State the date, the aircraft or simulator type, and the maneuver that was unsatisfactory without blaming the instructor, weather, or equipment. Then explain the corrective training you completed and how you apply that lesson on the flight deck today.

Practice example

When we reviewed your FAA Pilot Records Database file, we saw an unsatisfactory practical test attempt under Part 61 or an unsatisfactory simulator proficiency event. Walk us through what happened and what you learned from it.

Example answer, written by us. It is not a real applicant's story. During my initial instrument practical test under Part 61 three years ago, I received a notice of disapproval on the non-precision approach task. While flying the localizer approach in gusty crosswind conditions, I allowed my scan to fixate on the course deviation indicator after crossing the final approach fix, and I descended 40 feet below the minimum descent altitude before reaching the missed approach point. The examiner called the unsatisfactory maneuver immediately. I owned the mistake without making excuses. My instructor and I logged three additional hours of simulated instrument training focusing on a structured pitch-and-power scan and verbalizing altitude callouts at 100 feet above minimums. I retested five days later and passed. Since that checkride, whether flying single-pilot IFR or crewed simulator profiles during my ATP CTP training, I brief the exact altitude floor before every approach and treat verbal callouts as a hard barrier against altitude deviations.

This response works because it directly addresses the specific task recorded in the FAA Pilot Records Database under 14 CFR 111.135 without blaming external conditions. It clearly states the error, the retraining completed, and the lasting habit the pilot brought to airline-style operations.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

What pilot records are evaluated by an airline before a pilot can begin service?

Under 14 CFR 111.105 and 111.135, a reviewing airline must evaluate all FAA records in the Pilot Records Database (current certificates, medicals, type ratings, failed Part 61 practical tests, unoverturned enforcement actions, accident or incident records, and DOT drug and alcohol violations), plus employer-reported training, proficiency, disciplinary, and separation records, your 5-year employment history, and National Driver Register driving records.

How far in advance must a pilot apply for electronic access to the Pilot Records Database?

Under 14 CFR 111.305(c), you must submit your application for electronic access at least 7 days before you seek to access the PRD. To register on the FAA PRD Pilot User Portal, you must hold a Commercial, ATP, or Remote pilot certificate and a valid FAA medical certificate.

What are the FAA training requirements before taking the multiengine ATP knowledge test?

Under 14 CFR 61.153(e) and 61.156, you must present a graduation certificate from an approved Airline Transport Pilot Certification Training Program (ATP CTP). The course requires at least 30 hours of academic classroom instruction and at least 10 hours of training in a qualified flight simulation training device representing a multiengine turbine airplane.

How many flight hours are required to qualify for an ATP or R-ATP certificate?

Under 14 CFR 61.159, an unrestricted airplane ATP certificate requires at least 1,500 hours of total pilot time, including 500 hours of cross-country time and 250 hours of airplane PIC time. Under 14 CFR 61.160, restricted privileges ATP (R-ATP) total time minimums are 750 hours for qualified U.S. military pilots, 1,000 hours for graduates with an approved aviation Bachelor's degree and 60 aviation credit hours, and 1,250 hours for graduates with an approved aviation Associate's degree and 30 credit hours.

Can an airline still use PRIA instead of the Pilot Records Database?

No. Under 14 CFR 111.5(b), the Pilot Records Improvement Act (PRIA) ceased to be effective on September 9, 2024, and is no longer an available alternative to the PRD for air carriers and operators.

Sources