FedEx Pilot Requirements: FAA Part 121 Qualifications and ATP Rules

Short answer: To fly as a pilot for a Part 121 air carrier like FedEx, Federal Aviation Administration (FAA) regulations under 14 CFR 121.436 require you to hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the aircraft being flown. Obtaining an unrestricted multiengine airplane ATP certificate under 14 CFR 61.159 requires at least 1,500 hours of total pilot time, including 500 hours of cross-country time and 250 hours as Pilot in Command. To upgrade to Captain (Pilot in Command) or serve as Second in Command on a flag or supplemental flight requiring three or more pilots, you must hold an unrestricted ATP certificate and log at least 1,000 hours of qualifying air carrier or commercial flight experience.

FAA Part 121 Pilot Qualification Standards and Military Credit

Every US mainline cargo and passenger airline operates under Title 14 of the Code of Federal Regulations (14 CFR) Part 121. When you prepare your logbooks and certificates for a career at a Part 121 carrier such as FedEx, your baseline eligibility is governed by 14 CFR 121.436, which sets the federal certificate and experience requirements for both First Officers (Second in Command) and Captains (Pilot in Command).

Under 14 CFR 121.436(b), no certificate holder may use a pilot as Second in Command (SIC) unless that pilot holds an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the aircraft being flown. A second-in-command type rating obtained under 14 CFR 61.55 does not satisfy Part 121 requirements. Air carriers provide the required full aircraft type rating during your initial new-hire training footprint under 14 CFR 61.157(c) and Part 121 Subpart N.

For pilots serving as Pilot in Command (PIC), or serving as Second in Command in a Part 121 flag or supplemental operation that requires three or more pilots (such as long-haul international cargo routes with augmented crews), you must hold an unrestricted ATP certificate not subject to the restricted privileges limitations of 14 CFR 61.167 (14 CFR 121.436(a) and 61.167(b)). A pilot holding a Restricted Privileges ATP (R-ATP) certificate cannot act as PIC in any Part 121 operation and cannot serve as SIC on a three-pilot or four-pilot flag or supplemental crew.

In addition to holding an unrestricted ATP certificate and the appropriate aircraft type rating, 14 CFR 121.436(a)(3) requires a Part 121 Pilot in Command to have at least 1,000 hours of specific air carrier or commercial operating experience accumulated through any combination of the following roles:

  • Second in Command in Part 121 operations.
  • Pilot in Command in operations under 14 CFR 91.1053(a)(2)(i) (fractional ownership program turbojet or large multiengine aircraft).
  • Pilot in Command in eligible on-demand operations that require the pilot to satisfy 14 CFR 135.4(a)(2)(ii)(A).
  • Pilot in Command in Part 121 operations obtained prior to July 31, 2013 (14 CFR 121.436(d)).
  • Military Pilot in Command Credit (up to 500 hours): Under 14 CFR 121.436(c), you may credit up to 500 hours of military flight time toward the 1,000-hour Part 121 PIC requirement if obtained as PIC in a multiengine, turbine-powered, fixed-wing airplane or powered-lift aircraft in an operation requiring more than one pilot.

Unrestricted ATP Certificate Eligibility and Flight Hours

Because international flag and supplemental operations requiring three or more pilots require an unrestricted ATP certificate under 14 CFR 121.436(a)(1), meeting the full requirements of 14 CFR Part 61 Subpart G is a primary milestone for heavy cargo applicants. Under 14 CFR 61.153, an applicant for an unrestricted ATP certificate must be at least 23 years of age, be of good moral character, and be able to read, speak, write, and understand the English language.

To take the ATP practical test, 14 CFR 61.153(d) requires you to hold a US Commercial Pilot Certificate with an instrument rating, meet the military experience requirements under 14 CFR 61.73 to qualify for a commercial pilot certificate and instrument rating, or hold an eligible foreign ATP or commercial pilot license with instrument privileges and no geographical limitations issued by an International Civil Aviation Organization (ICAO) contracting State.

Under 14 CFR 61.159(a), an applicant for an unrestricted ATP certificate with an airplane category and class rating must log at least 1,500 hours of total time as a pilot, meeting specific minimums and simulator credit caps across each category.

FAA Unrestricted Airplane ATP Flight Hour Requirements (14 CFR 61.159)

Experience Category Minimum Hours Required Simulator Credit & Specific Sub-Rules (14 CFR 61.159)
Total Time as a Pilot 1,500 hours At most 100 hours may be obtained in a full flight simulator (FFS) or flight training device (FTD) representing an airplane in an approved Part 121, 135, 141, or 142 course.
Cross-Country Flight Time 500 hours Reduced to 200 hours for Restricted Privileges ATP (R-ATP) applicants under 14 CFR 61.160.
Night Flight Time 100 hours A pilot with at least 20 night takeoffs and full-stop landings may substitute each additional night takeoff and full-stop landing for 1 hour of night flight time, up to 25 hours total.
Class of Airplane Sought 50 hours Up to 25 hours of training in a full flight simulator representing the class of airplane may be credited from an approved Part 121, 135, 141, or 142 course (FTDs and ATDs do not count).
Instrument Flight Time (Actual or Simulated) 75 hours Maximum 25 hours of simulated instrument time in an FFS or FTD (or up to 50 hours if completed in a certificated Part 142 training center course).
Airplane Pilot in Command (or Supervised SIC Performing PIC Duties) 250 hours Must include at least 100 hours of cross-country PIC time and at least 25 hours of night PIC time. Qualifying military pilots under 61.73 may credit horizontal flight in a powered-lift aircraft.
Flight Engineer Time Credit Up to 500 hours (Credited at 1:3 ratio) Commercial pilots may credit 1 hour for each 3 hours of qualifying Part 121 or US Armed Forces flight engineer time, up to 500 hours maximum credit.

Restricted Privileges ATP (R-ATP) Pathways and Logbook Crediting Rules

While an unrestricted ATP is required to act as Pilot in Command or serve as SIC on a three-or-more-pilot international crew, 14 CFR 61.160 allows eligible military, collegiate, and cross-country-limited pilots who are at least 21 years old (14 CFR 61.153(a)(2)) to obtain a multiengine airplane ATP certificate with restricted privileges. All R-ATP pathways under 14 CFR 61.160 require 200 hours of cross-country time instead of the standard 500 hours, while still requiring 250 hours of airplane PIC, 100 hours of night, 75 hours of instrument, and 50 hours in class.

By our calculation from 14 CFR 61.159(a) and 14 CFR 61.160(a) through (f), all four R-ATP pathways reduce the 500-hour cross-country requirement by 300 hours (a 60% reduction) and reduce the standard 1,500-hour total time requirement by the margins shown in the table below.

FAA Restricted Privileges ATP (R-ATP) Pathways and Our Calculated Hour Reductions (14 CFR 61.160)

Pathway (14 CFR 61.160) Minimum Age Total Time Required Cross-Country Time Required
U.S. Military Pilot Graduate (61.160(a)) 21 years 750 hours 200 hours
Bachelor's Degree with Aviation Major & 60 Aviation Credits (61.160(b)) 21 years 1,000 hours 200 hours
Associate's Degree or Bachelor's with 30 to 59 Aviation Credits (61.160(c)-(d)) 21 years 1,250 hours 200 hours
1,500-Hour Pilot with Reduced Cross-Country (61.160(f)) 21 years 1,500 hours 200 hours

Logbook Crediting Rules for Part 135 SIC PDP and ICAO Limitations

When auditing your logbooks, verify how supervised SIC and international hours are credited. Under 14 CFR 61.159(c), a commercial pilot employed by a Part 119 certificate holder conducting Part 135 operations may log SIC time toward ATP total time when a second pilot is not required by the aircraft type certificate or operating regulations, provided the flight is conducted under an FAA-approved Part 135.99 Second-in-Command Professional Development Program (SIC PDP).

Under 14 CFR 61.159(e) and 61.160(h), applicants who use night landing substitutions, Part 135 SIC PDP credits, flight engineer time credits, or reduced-hour R-ATP rules receive an ICAO limitation on their certificate stating: Holder does not meet the pilot in command aeronautical experience requirements of ICAO. That limitation is removed once the pilot presents satisfactory evidence of meeting full 14 CFR 61.159 and ICAO experience requirements.

ATP Certification Training Program (ATP CTP) Requirements

Before taking the FAA knowledge test for a multiengine airplane ATP certificate or a multiengine type rating issued concurrently with an ATP certificate, 14 CFR 61.153(e) and 61.156 require you to present a graduation certificate from an authorized training provider (certificated under Part 121, 135, 141, or 142) certifying completion of the Airline Transport Pilot Certification Training Program (ATP CTP). Under 14 CFR 121.410(a), an air carrier's ATP CTP must be separate from its Part 121 training program.

By our calculation from 14 CFR 61.156(a) and (b), the ATP CTP requires at least 40 total programmed hours of instruction, divided into 30 hours of academic classroom training (75 percent of the course) and 10 hours of training in a Flight Simulation Training Device (25 percent of the course):

  • Aerodynamics (at least 8 classroom hours): High-altitude operations, Mach effects, and transport category flight characteristics (14 CFR 61.156(a)(1)).
  • Meteorology (at least 2 classroom hours): Adverse weather phenomena, windshear, icing, and weather detection systems (14 CFR 61.156(a)(2)).
  • Air Carrier Operations (at least 14 classroom hours): Physiology, communications, checklist philosophy, operational control, Minimum Equipment List (MEL) and Configuration Deviation List (CDL) procedures, ground operations, turbine engines, transport category performance, and automation, navigation, and flight path warning systems (14 CFR 61.156(a)(3)).
  • Leadership and Safety Culture (at least 6 classroom hours): Leadership, professional development, crew resource management (CRM), and safety culture (14 CFR 61.156(a)(4)).
  • Full Flight Simulator Training (at least 6 FSTD hours): Conducted in a Level C or higher Full Flight Simulator (FFS) qualified under Part 60 representing a multiengine turbine airplane with a maximum takeoff weight of 40,000 pounds or greater, covering low energy states/stalls, upset recovery, and adverse weather (14 CFR 61.156(b)(1)).
  • Navigation and Automation FSTD Training (up to 4 FSTD hours): Completed in a Level 4 or higher FSTD covering flight management systems and autoflight (14 CFR 61.156(b)(2)).

Pilot Records Database (PRD), NDR, and Medical Requirements

Under 14 CFR 111.5(a) and (b), compliance with the electronic FAA Pilot Records Database (PRD) became mandatory on September 9, 2024, when the legacy Pilot Records Improvement Act (PRIA) ceased to be effective as an alternative. Under 14 CFR 111.105 and 111.135, a hiring Part 121 air carrier cannot permit you to begin service as a pilot until it has accessed and evaluated all relevant records in the PRD:

  • FAA Certificates and Ratings (14 CFR 111.135(a)): Current pilot and medical certificates, type ratings, and limitations.
  • Practical Test Failures (14 CFR 111.135(b)): Any failed attempt to pass a practical test required for a certificate or type rating under 14 CFR Part 61.
  • Enforcement Actions and Accidents (14 CFR 111.135(c)-(d)): Unoverturned FAA enforcement actions resulting in a finding of a violation, plus aviation accidents or incidents where the applicant acted as PIC or SIC.
  • DOT Drug and Alcohol Records (14 CFR 111.135(e) and 111.220): Verified positive drug tests, breath alcohol concentrations of 0.04 or greater, refusals to submit to testing, and return-to-duty or follow-up test results.
  • Employer Training, Disciplinary, and Separation Records (14 CFR 111.225, 111.230, 111.235, and 111.255): Check pilot evaluations, satisfactory and unsatisfactory training/checking events, unoverturned final disciplinary actions pertaining to pilot performance, final separation from employment records, and historical PRIA records dating back to August 1, 2005 for Part 121 air carriers.

PRD Portal Registration, NDR Search, and Medical Rules

To register for the PRD Pilot User Portal, you must hold a Commercial, ATP, or Remote pilot certificate and a valid FAA medical certificate (Private Pilots cannot access the PRD system). Under 14 CFR 111.305(c) and 111.310, you must apply for electronic PRD access at least 7 days before seeking access, grant written consent for the carrier to view your file, and affirm that your 5-year employment history is accurate and complete. Under 14 CFR 111.245, voluntary safety reports protected under Part 193 (such as ASAP) are prohibited from being entered into the PRD.

Under 14 CFR 111.110 and 111.120(c), the hiring carrier must also obtain your written consent to run a National Driver Register (NDR) search of State motor vehicle driving records, and must provide you copies of any driving records obtained within 30 days if you request them.

For medical certification, you must use the FAA MedXPress online application to submit Items 1 through 20 of FAA Form 8500-8 before visiting an Aviation Medical Examiner (AME). Under 14 CFR 61.53, you are prohibited from performing flight crewmember duties if you know or have reason to know of any medical condition or medication side effect that renders you unable to meet the requirements for your medical certificate. The FAA Office of Aerospace Medicine also enforces a 48-hour no-fly and no-safety-related-duty interval after each dose or booster of the Pfizer-BioNTech, Moderna, or Novavax COVID-19 vaccines.

Part 121 Air Carrier Training Program Standards (Subpart N)

Once hired by a Part 121 operator flying Group II (turbojet-powered) aircraft, you must complete the carrier's FAA-approved initial training program under 14 CFR Part 121 Subpart N. Unless reduced by the FAA under 14 CFR 121.405, a Group II turbojet curriculum includes:

  • CRM and Emergency Drills: Mandatory initial CRM training (14 CFR 121.404) and hands-on emergency drills using approved fire extinguishers and Protective Breathing Equipment (PBE) simulation devices (14 CFR 121.415 and 121.417).
  • Extended Envelope Training: Performed in a Level C or higher Full Flight Simulator (14 CFR 121.407(e) and 121.423), covering manually controlled slow flight, loss of reliable airspeed, instrument departures/arrivals, upset recovery, bounced landing recovery, and full stall recovery.
  • Initial Flight Training and LOFT: Requires 20 programmed inflight hours for PIC and 10 programmed hours for SIC in Group II airplanes (14 CFR 121.424), unless completed in an approved Full Flight Simulator course under 14 CFR 121.409 and 121.424(e) (at least 4 hours at the controls of an FFS, Line-Oriented Flight Training representing two flight segments, and a Part 121.441 proficiency check).
  • PIC Leadership, Command, and Mentoring Training: Initial and recurrent ground training (every 36 months) on leadership, command authority, joint dispatcher-pilot responsibilities, and mentoring newly hired pilots before serving as PIC (14 CFR 121.419(c), 121.420, 121.427(d), and 121.429).

Pre-Application Checklist for Part 121 Cargo Pilot Candidates

Our team built this step-by-step verification checklist from the FAA regulations in 14 CFR Parts 61, 111, and 121 so you can audit your credentials before submitting or updating a Part 121 airline application:

    1. Verify ATP Certificate Status (14 CFR 121.436 & 61.159): Confirm that you hold an ATP certificate with a multiengine airplane rating, or have completed the 40-hour ATP CTP (14 CFR 61.156) and passed the ATP knowledge test. Check whether your certificate carries the Restricted in accordance with 14 CFR 61.167 limitation or the ICAO PIC limitation, and log the hours needed to remove them for three-or-more-pilot international flag operations.
    1. Audit PIC and Total Flight Time Columns (14 CFR 61.159 & 121.436): Separate your airplane PIC time from sole-manipulator or Part 135 SIC PDP time (14 CFR 61.159(c)(4)). If you are a military pilot, calculate your multiengine turbine PIC time in multi-pilot operations (up to 500 hours creditable toward Part 121 PIC under 14 CFR 121.436(c)).
    1. Activate and Audit Your FAA PRD Profile (14 CFR 111.305 & 111.315): Log in to the FAA PRD portal at least 7 days before releasing records. Review your FAA certificates, Part 61 practical test history, and former employer records for accuracy, and submit a correction request under 14 CFR 111.320 if needed.
    1. Complete Your 5-Year Employment History in the PRD (14 CFR 111.310(b)): Ensure every employer from the preceding 5 years is listed accurately so you can sign the mandatory affirmation and written consent when a hiring carrier requests access.
    1. Check Your Medical and Driving Records (14 CFR 61.53 & 111.110): Confirm your FAA Medical Certificate is current, keep your MedXPress (Form 8500-8) history consistent across renewals, and verify your State driving records ahead of the mandatory National Driver Register (NDR) search.

Practice example

Walk us through your Pilot Records Database file and your logbook audit. Are there any practical test failures, training events, or flight time categories you want to explain before we review your records?

Example answer, written by us. It is not a real applicant's story. Last month I logged into the FAA Pilot Records Database to review my FAA airman file, my five-year employment history, and the training records reported by my current Part 121 carrier. My PRD shows my unrestricted multiengine ATP certificate, my current medical certificate, and zero Part 121 training or proficiency check failures. It does list one Part 61 practical test discontinuance and one initial commercial multiengine checkride failure from six years ago. On that commercial checkride, I rushed the single-engine instrument approach setup and failed to complete the approach briefing before crossing the final approach fix. That failure taught me never to trade checklist discipline for speed. I retrained for three hours in the airplane, passed the retest two days later, and have used a structured briefing flow on every flight since. I also audited my logbooks against 14 CFR 61.159 and 121.436, separating my Part 121 SIC hours from my true Pilot in Command hours so every column matches my application.

This answer takes full ownership of a past Part 61 checkride failure that appears in the FAA Pilot Records Database under 14 CFR 111.135(b) without making excuses. It also shows the panel that the pilot proactively audited their PRD file and separated their PIC and SIC logbook columns in accordance with 14 CFR 61.159 and 121.436.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

What pilot certificate is required to fly for a Part 121 air carrier?

Under 14 CFR 121.436, both the Pilot in Command (Captain) and Second in Command (First Officer) must hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the aircraft being flown. A second-in-command type rating obtained under 14 CFR 61.55 does not satisfy Part 121 requirements.

How many flight hours are required for an unrestricted FAA ATP certificate?

Under 14 CFR 61.159, an unrestricted airplane ATP certificate requires at least 1,500 hours of total pilot time. That total must include at least 500 hours of cross-country time, 100 hours of night flight time, 50 hours in the class of airplane sought, 75 hours of instrument time, and 250 hours of airplane Pilot in Command (or supervised SIC performing PIC duties) time.

Can a pilot with a Restricted Privileges ATP (R-ATP) fly on a three-pilot international cargo crew?

No. Under 14 CFR 121.436(a) and 14 CFR 61.167(b), a pilot holding a Restricted Privileges ATP certificate may not act as Pilot in Command in any Part 121 operation and may not serve as Second in Command in Part 121 flag or supplemental operations that require three or more pilots.

How many hours of military flight time count toward Part 121 Captain upgrade requirements?

Under 14 CFR 121.436(c), a pilot may credit up to 500 hours of military flight time toward the 1,000-hour Part 121 Pilot in Command experience requirement. The military time must have been obtained as Pilot in Command in a multiengine, turbine-powered, fixed-wing airplane or powered-lift aircraft in an operation requiring more than one pilot.

What background records do Part 121 airlines check in the Pilot Records Database?

Under 14 CFR 111.105 and 111.135, hiring Part 121 air carriers must evaluate your FAA Pilot Records Database (PRD) file, which includes current pilot and medical certificates, failed Part 61 practical tests, unoverturned FAA enforcement actions, aviation accidents or incidents, DOT drug and alcohol history, 5-year employment history, and prior employer training, disciplinary, and separation records. Carriers must also run a National Driver Register (NDR) search of your State motor vehicle driving records under 14 CFR 111.110.

Sources