First Officer Delta: Part 121 Qualifications, ATP Flight Hours, and Interview Prep

Short answer: To fly as a first officer (second in command) at a Part 121 airline such as Delta Air Lines, federal rules under 14 CFR 121.436 require you to hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the airplane you fly. An unrestricted multiengine ATP certificate requires at least 1,500 hours of total pilot time under 14 CFR 61.159, though qualifying military and collegiate pilots can earn a restricted privileges ATP (R-ATP) starting at 750 to 1,250 hours under 14 CFR 61.160. Before you begin service, the air carrier must also evaluate your FAA, employment, and driving history through the Pilot Records Database under 14 CFR Part 111.

FAA Part 121 first officer qualifications (14 CFR 121.436)

If your goal is a first officer seat at a Part 121 carrier like Delta Air Lines, your baseline legal eligibility is governed by 14 CFR 121.436. In FAA regulations, a first officer is referred to as the second in command (SIC). No certificate holder may use you as second in command, and you may not act as second in command, unless you hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the aircraft being flown.

A second-in-command pilot type rating obtained under 14 CFR 61.55 does not satisfy Part 121 qualification requirements. When you complete an air carrier's approved initial training program, 14 CFR 61.157(c) and (f) allow you to earn your full aircraft type rating concurrently with your ATP certificate or add it to your existing ATP certificate by passing a Part 121 proficiency check under 14 CFR 121.441.

Your medical and certificate requirements depend on crew complement. As explained in the FAA's July 2013 final rule (78 FR 42324) and Notice N 8900.225, a second in command in a standard Part 121 two-pilot operation is only required by regulation to hold at least a second-class medical certificate and may fly with either an unrestricted ATP or a restricted privileges ATP (R-ATP). However, if you serve as second in command in a flag or supplemental operation that requires three or more pilots, you must hold an unrestricted ATP certificate not subject to 14 CFR 61.167 limitations, an appropriate aircraft type rating, and a first-class medical certificate.

  • Two-pilot Part 121 SIC: Requires an unrestricted ATP or R-ATP certificate, an appropriate aircraft type rating (not a 14 CFR 61.55 SIC type rating), and at least a second-class medical certificate (14 CFR 121.436(b), 78 FR 42324).
  • Three-or-more-pilot flag or supplemental SIC: Requires an unrestricted ATP certificate (minimum age 23), an appropriate aircraft type rating, and a first-class medical certificate (14 CFR 121.436(a), 78 FR 42324).
  • English and basic eligibility: Under 14 CFR 61.153, all ATP holders must read, speak, write, and understand English, be of good moral character, and hold a Commercial Pilot Certificate with an instrument rating (or qualifying military or foreign equivalent).

Unrestricted ATP flight hour requirements (14 CFR 61.159)

To hold an unrestricted ATP certificate with an airplane category and class rating, you must be at least 23 years of age under 14 CFR 61.153(a)(1) and meet the aeronautical experience breakdown in 14 CFR 61.159(a). The core threshold is at least 1,500 hours of total time as a pilot. Watch the simulator caps carefully when auditing your logbooks before an interview, because simulator hours above the regulatory limits cannot be counted toward the minimums.

If you have performed at least 20 night takeoffs and landings to a full stop, you may substitute each additional night takeoff and landing to a full stop for 1 hour of night flight time, up to 25 hours. A commercial pilot who has worked as a flight engineer in Part 121 operations or as a U.S. Armed Forces flight engineer crewmember while participating in an approved pilot or flight engineer training program can credit 1 hour for each 3 hours of flight engineer time toward the 1,500-hour total, up to 500 credited hours. Crediting time under paragraphs (b), (c), or (d) of 14 CFR 61.159 places an ICAO limitation on your certificate until you meet full ICAO requirements.

Unrestricted ATP Airplane Aeronautical Experience Minimums (14 CFR 61.159)

Experience Category Minimum Hours Required Simulator & Substitution Rules (14 CFR 61.159)
Total time as a pilot 1,500 hours At most 100 hours total in an FFS or FTD representing an airplane in an approved Part 121, 135, 141, or 142 course.
Cross-country flight time 500 hours Must include at least 100 hours of cross-country time as airplane PIC (or SIC performing PIC duties under supervision).
Night flight time 100 hours After 20 full-stop night takeoffs and landings, each additional full-stop night takeoff and landing substitutes for 1 hour, up to 25 hours.
Class of airplane sought (e.g., multiengine) 50 hours At most 25 hours in a Full Flight Simulator (FFS) in an approved Part 121, 135, 141, or 142 course. FTDs and ATDs cannot be used.
Actual or simulated instrument time 75 hours At most 25 hours in an FFS or FTD (or up to 50 hours if completed in a Part 142 certificated training center course).
Airplane PIC (or SIC performing PIC duties under supervision) 250 hours Must include at least 100 hours of cross-country time and 25 hours of night flight time.

Restricted privileges ATP (R-ATP) pathways (14 CFR 61.160)

If you have not yet reached 1,500 total hours, 500 hours of cross-country time, or age 23, you can still qualify to act as a Part 121 first officer in two-pilot operations by earning a restricted privileges ATP (R-ATP) under 14 CFR 61.160. Every R-ATP pathway lowers the minimum age to 21 years under 14 CFR 61.153(a)(2) and lowers the cross-country requirement to 200 hours, while requiring all other night, instrument, class, and 250-hour PIC minimums of 14 CFR 61.159.

For collegiate pathways, your degree must come from an accredited institution of higher education holding an FAA Letter of Authorization issued under 14 CFR 61.169. Your Commercial Pilot Certificate and instrument rating ground training must be completed in an approved Part 141 curriculum at the institution, and your flight training at the institution or an associated Part 141 school under a 14 CFR 141.26 training agreement.

R-ATP Eligibility Pathways and Hour Reductions (14 CFR 61.160)

Pathway Minimum Total Hours Minimum Age & Cross-Country Hour Reduction vs. 1,500-Hour ATP
U.S. Military Pilot (14 CFR 61.160(a)) 750 hours Age 21, 200 hours XC 750 hours
Bachelor's Degree with Aviation Major, 60+ aviation semester credits (14 CFR 61.160(b)) 1,000 hours Age 21, 200 hours XC 500 hours
Associate's or Bachelor's Degree with Aviation Major, 30 to 59 aviation semester credits (14 CFR 61.160(c)-(d)) 1,250 hours Age 21, 200 hours XC 250 hours
1,500-Hour Pilot Under Age 23 or Under 500 Hours XC (14 CFR 61.160(f)) 1,500 hours Age 21, 200 hours XC 0 hours (age and XC reduction only)

ATP Certification Training Program (ATP CTP) and knowledge test (14 CFR 61.156)

Before taking the ATP multiengine knowledge test (the ATM exam) or obtaining an ATP certificate concurrently with a multiengine airplane type rating, 14 CFR 61.153(e) and 14 CFR 61.156 require a graduation certificate from an authorized Part 121, 135, 141, or 142 training provider certifying completion of an FAA-approved Airline Transport Pilot Certification Training Program (ATP CTP).

By our calculation from 14 CFR 61.156(a) and (b), the ATP CTP requires a minimum of 40 total hours of instruction: 75 percent (30 hours) is classroom academic training and 25 percent (10 hours) is training in a Part 60 Flight Simulation Training Device (FSTD) representing a multiengine turbine airplane. Per FAA Notice N 8900.225, ATM knowledge test results are valid for 60 calendar months.

  • Aerodynamics (at least 8 academic hours): High-altitude operations and transport aircraft aerodynamics (14 CFR 61.156(a)(1)).
  • Meteorology (at least 2 academic hours): Adverse weather phenomena and weather detection systems (14 CFR 61.156(a)(2)).
  • Air carrier operations (at least 14 academic hours): Physiology, communications, checklist philosophy, operational control, MEL/CDL, ground operations, turbine engines, transport category performance, and automation, navigation, and flight path warning systems (14 CFR 61.156(a)(3)).
  • Leadership and CRM (at least 6 academic hours): Leadership, professional development, crew resource management, and safety culture (14 CFR 61.156(a)(4)).
  • Level C or higher Full Flight Simulator (at least 6 FSTD hours): Represents a multiengine turbine airplane of 40,000 pounds or greater maximum takeoff weight (unless deviation authority is granted) and covers low energy states/stalls, upset recovery techniques, and adverse weather including icing, thunderstorms, and crosswinds with gusts (14 CFR 61.156(b)(1)).
  • Level 4 or higher FSTD (remaining 4 FSTD hours): Navigation including flight management systems (FMS) and automation including autoflight (14 CFR 61.156(b)(2)).

Part 121 captain upgrade rules (14 CFR 121.436)

To eventually upgrade from first officer to captain (PIC) under 14 CFR 121.436(a) and (c), you need an unrestricted ATP certificate, an appropriate type rating, and a first-class medical certificate. You must also have 1,000 hours of air carrier experience. That experience can come from Part 121 SIC time, PIC time under 14 CFR 91.1053(a)(2)(i), 135.243(a)(1), or 135.4(a)(2)(ii)(A), or pre-July 31, 2013 Part 121 PIC time. Military pilots may credit up to 500 hours of multicrew, multiengine turbine fixed-wing or powered-lift military PIC time toward the 1,000 hours, leaving 500 hours of qualifying air carrier time by our calculation from 14 CFR 121.436(a)(3) and (c). Per 78 FR 42324, minimum total flight hours at Part 121 PIC upgrade work out to at least 2,500 hours for a 1,500-hour ATP holder with no prior air carrier time, 1,750 hours for a 750-hour military R-ATP pilot, and 2,000 hours for a 1,000-hour bachelor's R-ATP pilot.

Pilot Records Database (PRD) pre-employment screening (14 CFR Part 111)

Under 14 CFR 111.5(b), the Pilot Records Improvement Act (PRIA) ceased to be effective on September 9, 2024, making the FAA Pilot Records Database (PRD) mandatory. Under 14 CFR 111.105 and 111.120, no air carrier may permit you to begin service as a pilot until you grant written consent and the carrier evaluates your FAA records, prior employer records, five-year employment history, and National Driver Register (NDR) driving records. To register for the PRD pilot portal, you must hold a Commercial, ATP, or Remote pilot certificate and a valid FAA medical.

Review your own PRD file before your interview using this checklist:

  • Apply at least 7 days early and stay active: Under 14 CFR 111.305(c), submit your electronic access application at least 7 days before accessing the PRD. Starting mid-November 2026, the FAA automatically disables PRD user accounts after 365 days of inactivity, so log in yearly.
  • Audit your FAA records (14 CFR 111.135): Verify current certificates, ratings, medicals, any failed Part 61 practical tests (checkrides), unoverturned enforcement actions, accidents or incidents as PIC or SIC, and DOT drug or alcohol violations (including confirmed alcohol results of 0.04 or greater or refusals to test).
  • Check employer training records (14 CFR 111.225 and 111.255): Review training, qualification, proficiency, disciplinary, and separation records from June 10, 2022 onward, plus historical PRIA records dating back to August 1, 2005 for Part 121/135 carriers, including check pilot comments and unsatisfactory tasks. Flight/duty/rest records, medical exams, and protected Part 193 Voluntary Safety Reporting Program reports are prohibited under 14 CFR 111.225(b) and 111.245.
  • Confirm 5-year employment, NDR consent, and dispute errors (14 CFR 111.120, 111.250, 111.310, 111.320): Affirm your 5-year employment history, sign separate NDR consent (carriers must provide requested State driving records within 30 days), and flag any PRD inaccuracies (employers must correct agreed errors within 10 days or investigate disputes within 30 days).

How to prepare for your first officer interview

Airline pilot interviews combine human-resources and line-captain behavioral questions ('tell me about a time' and 'why our airline') with technical and operational scenarios drawn from FAA regulations and line flying. Airlines warn against coached or memorized answers. Use this four-step preparation plan:

  • Audit your logbooks against 14 CFR 61.159 and 121.436: Verify actual vs. simulated instrument time, confirm your 250-hour airplane PIC cross-country (100 hours) and night (25 hours) sub-minimums, and check that simulator hours stay within the 25-hour class and 100-hour total caps.
  • Pull your own FAA PRD file: Log in before granting employer consent so you know every checkride date and evaluator comment on your record and can explain any training event with full ownership.
  • Build a bank of your own real cockpit stories: Outline 8 to 10 personal flight experiences covering CRM, Captain-First Officer disagreements, weather diversions, MEL/CDL delays, unstable approach go-arounds, and checklist discipline.
  • Practice answering out loud with follow-up questions: Rehearse speaking your technical and behavioral answers out loud so you state the rule or action first, explain your reasoning clearly, and stay composed under follow-up questioning.

Practice example

You hold a restricted privileges ATP (R-ATP) certificate issued at age 22 with 1,400 hours of total pilot time, an appropriate aircraft type rating, and a second-class medical certificate. Can crew scheduling assign you as Second in Command on a Part 121 international flag flight that requires three pilots? What must change before you can legally accept that assignment?

Example answer, written by us. It is not a real applicant's story. No, I cannot legally accept a Second in Command assignment on a Part 121 flag or supplemental operation requiring three or more pilots with my current certificates. Under 14 CFR 121.436(a) and 14 CFR 61.167(b)(2), an R-ATP holder is restricted to serving as Second in Command in domestic, flag, or supplemental operations that require no more than two pilot flightcrew members. To serve as Second in Command in an augmented operation requiring three or more pilots, 14 CFR 121.436(a)(1) requires me to hold an unrestricted ATP certificate with the 14 CFR 61.167 limitation removed, which means reaching at least age 23 under 14 CFR 61.153(a)(1) and meeting the full 1,500-hour and 500-hour cross-country aeronautical experience minimums of 14 CFR 61.159. In addition, while a second-class medical certificate is sufficient for two-pilot Part 121 SIC duties, serving as SIC in a flag or supplemental operation requiring three or more pilots requires a valid first-class medical certificate.

This answer directly cites the governing regulations (14 CFR 121.436(a), 14 CFR 61.167(b), and 14 CFR 61.159), distinguishes between two-pilot and three-or-more-pilot Part 121 operations, and identifies both the ATP restriction and the medical certificate upgrade required.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

What FAA certificates are required to be a First Officer at a Part 121 airline?

Under 14 CFR 121.436(b), a pilot acting as second in command (first officer) in Part 121 operations must hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the airplane being flown. In standard two-pilot operations, this may be a restricted privileges ATP (R-ATP) issued under 14 CFR 61.160, while flag or supplemental operations requiring three or more pilots require an unrestricted ATP under 14 CFR 121.436(a).

How many flight hours do you need for an unrestricted ATP vs. a Restricted ATP (R-ATP)?

Under 14 CFR 61.159, an unrestricted airplane ATP certificate requires at least 1,500 hours of total pilot time, including 500 hours of cross-country time, 100 hours of night time, 75 hours of instrument time, 50 hours in class of airplane, and 250 hours of airplane PIC time. Under 14 CFR 61.160, eligible pilots at least 21 years old with 200 hours of cross-country time can qualify for an R-ATP with 750 hours (U.S. military pilot graduates), 1,000 hours (qualifying bachelor's degree with 60+ aviation semester credits), or 1,250 hours (qualifying associate's or bachelor's degree with 30+ aviation semester credits).

Does a 14 CFR 61.55 second-in-command type rating count for Part 121 operations?

No. Under 14 CFR 121.436(b), a second-in-command type rating obtained under 14 CFR 61.55 does not satisfy Part 121 qualification requirements. Every Part 121 first officer must hold a full aircraft type rating appropriate for the aircraft being flown.

What medical certificate is required for a Part 121 First Officer?

According to the FAA final rule (78 FR 42324) and FAA Notice N 8900.225, a second in command in standard two-pilot Part 121 operations is required by regulation to hold at least a second-class medical certificate. However, a first-class medical certificate is required to exercise pilot-in-command privileges or to serve as second in command in Part 121 flag or supplemental operations requiring three or more pilots.

How many hours does a First Officer need to upgrade to Captain under Part 121?

Under 14 CFR 121.436(a)(3), a pilot must have at least 1,000 hours of qualifying air carrier experience (such as Part 121 SIC time or qualifying Part 135 or Part 91K PIC time) and hold an unrestricted ATP certificate to serve as Pilot in Command. Under 14 CFR 121.436(c), up to 500 hours of multiengine, turbine-powered, fixed-wing or powered-lift military PIC time in a multicrew operation can be credited toward that 1,000-hour requirement.

Sources