Global X Airlines Careers: FAA Part 121 Qualifications and Training Guide

Short answer: Global X Airlines careers are governed by FAA 14 CFR Part 121 operating rules, which apply to every person employed for flight, cabin, ground, and aircraft maintenance duties. Under 14 CFR 121.436, First Officers must hold an Airline Transport Pilot (ATP) certificate and an aircraft type rating, while Captains also need 1,000 hours of qualifying air carrier flight time. Before any pilot begins service, the carrier must evaluate their FAA, employer, and driving records through the Pilot Records Database under 14 CFR 111.105.

How Part 121 rules shape Global X Airlines careers

When you apply for Global X Airlines careers (Global Crossing Airlines), you step into an operation governed by Title 14 of the Code of Federal Regulations (14 CFR) Part 121. Under 14 CFR 121.1, these rules govern the domestic, flag, and supplemental operations of any Air Carrier Certificate holder, as well as every person employed or used for flight, cabin, ground, maintenance, preventive maintenance, and alteration duties. Part 121 also covers personnel performing training, qualification, or evaluation under an Advanced Qualification Program (AQP) in Subpart Y, and requires U.S.-certificated airmen employed by the carrier to operate any dry-leased foreign-registered civil aircraft in common carriage.

Knowing the difference between domestic, flag, and supplemental operations helps you prepare for your technical interview. Under 14 CFR 121.107, domestic and flag carriers must maintain enough dispatch centers at necessary points to ensure operational control of each flight. Under Part 121, certificate holders conducting supplemental operations must demonstrate that they have competent personnel, facilities, and equipment available for servicing and maintaining aircraft. Supplemental operators using a flight following system must also prove their designated operational control personnel can perform required duties.

Air carriers must prepare and maintain a current manual to guide flight, ground operations, and management personnel. This manual must outline the duties and responsibilities of each crewmember, appropriate ground organization members, and management personnel. Employees who are furnished a manual or parts of it must keep it up-to-date and have it accessible when performing their assigned duties. Supplemental operators must also keep appropriate parts of the operations manual accessible in English to flight, ground, and maintenance personnel at all times.

  • Pilots (Captains and First Officers): Conduct preflight checks, follow approved cockpit checklists, and maintain operational control alongside dispatch or flight following.
  • Flight Attendants: Manage cabin safety, inspect emergency equipment, and execute emergency evacuations.
  • Aviation Maintenance Technicians (AMTs): Perform servicing, preventive maintenance, alterations, and ETOPS maintenance when qualified.
  • Dispatch and Flight Following Personnel: Maintain operational control, analyze weather using U.S. National Weather Service or FAA-approved sources (14 CFR 121.101 and 121.119), and monitor flight progress.

Pilot certificate and flight time requirements (14 CFR 121.436 and Part 61)

Under 14 CFR 121.436 and FAA Advisory Circular (AC) 61-138, every pilot in command (PIC) and second in command (SIC) in Part 121 operations must hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating. A second-in-command type rating obtained under 14 CFR 61.55 does not satisfy Part 121 requirements.

To serve as a Part 121 Captain (PIC), or as an SIC in a flag or supplemental operation requiring three or more pilots, 14 CFR 121.436(a) requires an unrestricted ATP certificate (not subject to 14 CFR 61.167 limitations), an aircraft type rating, and at least 1,000 hours of air carrier experience. You can meet the 1,000-hour requirement through Part 121 SIC time, PIC time under 14 CFR 91.1053(a)(2)(i) or 135.243(a)(1), PIC time in eligible on-demand operations under 135.4(a)(2)(ii)(A), or any combination thereof. Under 14 CFR 121.436(c), you may credit up to 500 hours of military flight time obtained as PIC in a multiengine, turbine-powered, fixed-wing airplane or powered-lift aircraft in a multi-pilot operation.

A standard unrestricted airplane ATP certificate under 14 CFR 61.153 and 61.159 requires you to be at least 23 years old, read, speak, write, and understand English, hold a Commercial Pilot Certificate with an instrument rating (or military/foreign equivalent), and log 1,500 hours of total pilot time. Pilots at least 21 years old who meet the military, degree, or cross-country rules of 14 CFR 61.160 may earn a restricted privileges ATP (R-ATP) certificate to serve as a Part 121 First Officer.

FAA ATP and Part 121 Pilot Experience Minimums (14 CFR 61.153, 61.159, 61.160, and 121.436)

Pathway or Role Minimum Age Total Pilot Time Cross-Country Time Additional Key Requirements
Standard Unrestricted ATP (14 CFR 61.159) 23 years 1,500 hours 500 hours 100 hours night, 75 hours instrument, 50 hours in class, 250 hours PIC (100 XC, 25 night)
R-ATP: U.S. Military Pilot (14 CFR 61.160(a)) 21 years 750 hours 200 hours DD-214 honorable discharge (or active record) and military undergraduate pilot training graduation
R-ATP: Aviation Bachelor's (14 CFR 61.160(b)) 21 years 1,000 hours 200 hours 60 semester credits of approved aviation coursework plus Part 141 commercial and instrument training
R-ATP: Associate's / 30-59 Credits (14 CFR 61.160(c)-(d)) 21 years 1,250 hours 200 hours At least 30 semester credits of approved aviation coursework plus Part 141 commercial and instrument training
R-ATP: Cross-Country Reduced (14 CFR 61.160(f)) 21 years 1,500 hours 200 hours Must meet all other aeronautical experience requirements of 14 CFR 61.159
Part 121 Captain / PIC (14 CFR 121.436(a)) 23 years 1,500 hours 500 hours Unrestricted ATP, type rating, and 1,000 hours qualifying Part 121 SIC or Part 135/91K PIC time

ATP Certification Training Program (ATP CTP) breakdown

Before taking the knowledge test for an ATP certificate with a multiengine airplane rating or concurrently with a multiengine type rating, 14 CFR 61.153(e) and 61.156 require a graduation certificate from an authorized ATP Certification Training Program (ATP CTP) provider under Part 121, 135, 141, or 142.

Under 14 CFR 61.156, the ATP CTP requires at least 30 hours of classroom instruction and at least 10 hours in a qualified multiengine turbine flight simulation training device (FSTD). By our calculation from 14 CFR 61.156, the mandatory minimum ATP CTP footprint totals 40 hours, with 75 percent (30 of 40 hours) in classroom academics and 25 percent (10 of 40 hours) in FSTDs. Within the 30-hour academic block, air carrier operations represent 46.7 percent (14 of 30 hours) of the classroom curriculum.

  • Aerodynamics (at least 8 classroom hours): High-altitude operations.
  • Meteorology (at least 2 classroom hours): Adverse weather phenomena and weather detection systems.
  • Air carrier operations (at least 14 classroom hours): Physiology, communications, checklist philosophy, operational control, MEL/CDL, ground operations, turbine engines, transport performance, and automation, navigation, and flight path warning systems.
  • Leadership and safety culture (at least 6 classroom hours): Leadership, professional development, CRM, and safety culture.
  • Full Flight Simulator training (at least 6 FSTD hours): Level C or higher FFS representing a multiengine turbine airplane with a maximum takeoff weight of 40,000 pounds or more, covering low energy states/stalls, upset recovery, and adverse weather (icing, thunderstorms, gusty crosswinds).
  • Additional FSTD training (up to 4 FSTD hours): Level 4 or higher FSTD, covering navigation (FMS) and automation (autoflight).

Pilot Records Database (PRD) and background screening

Every Part 121 carrier is a reviewing and reporting entity under 14 CFR Part 111. Under 14 CFR 111.5, the Pilot Records Improvement Act (PRIA) ceased to be an available alternative on September 9, 2024. Under 14 CFR 111.105, no Part 121 carrier may permit an individual to begin service as a pilot until evaluating all relevant information in the FAA Pilot Records Database (PRD).

Under 14 CFR 111.305 and 111.310, you must hold a Commercial, ATP, or Remote pilot certificate with a valid FAA medical to register in the PRD portal, and submit your electronic access application at least 7 days before use. Before a hiring airline can view your record, you must grant written consent in the PRD and affirm your 5-year employment history is accurate and complete. Beginning in mid-November 2026, the FAA automatically disables PRD user accounts after 365 days of inactivity, so log in at least once a year.

  • FAA records (14 CFR 111.135): Current pilot and medical certificates, type ratings, limitations, failed Part 61 practical tests, unoverturned enforcement findings, accident or incident involvement as PIC or SIC, and DOT drug and alcohol violations (verified positive drug tests, alcohol results of 0.04 or greater, and refusals).
  • Employer reporting records (14 CFR 111.205 to 111.235): Training, qualification, and proficiency records (including check pilot comments and unsatisfactory maneuvers), final disciplinary actions related to pilot performance, and final separation from employment records. Voluntary Safety Reporting Program records protected under Part 193 cannot be entered into the PRD (14 CFR 111.245).
  • National Driver Register (NDR) search (14 CFR 111.110 and 111.240): Requires a separate written consent. The carrier must evaluate any state driving records and document compliance in the PRD within 45 days of your PRD date of hire. Upon request, the carrier must provide copies of state driving records obtained within 30 days (14 CFR 111.120(c)).

New-hire training, IOE, and consolidation after you are hired

Once hired, you must complete initial ground and flight training approved under Subpart N before serving as a required crewmember (14 CFR 121.433). Newly hired Part 121 pilots who began basic indoctrination on or after April 27, 2022 must also complete operations familiarization before starting operating experience, occupying the flight deck observer seat with an operational headset for at least 2 operating cycles (14 CFR 121.435).

Next, you complete Initial Operating Experience (IOE) inflight under 14 CFR 121.434. If you completed your preflight visual inspection by pictorial means during your proficiency check, you must demonstrate a complete interior and exterior static airplane preflight inspection to a check pilot before finishing IOE. For turbojet transports (Group II airplanes), initial pilot IOE requires at least 25 flight hours and at least 4 operating cycles (at least 2 as pilot flying) under a check pilot. Qualifying Captains completing initial or upgrade training must also be observed by an FAA inspector during at least one flight leg including a takeoff and landing.

After passing your type rating practical test or Part 121.441 proficiency check, 14 CFR 121.434(g) requires new Captains and First Officers to log at least 100 hours of line operating flight time for consolidation of knowledge and skills (including IOE hours) within 120 days. The carrier may extend this window up to 150 days with refresher training or a supervised line observation flight on or before day 120. Under 14 CFR 121.438, special takeoff and landing limits apply while an SIC has fewer than 100 hours in that airplane type under Part 121 and is paired with a line Captain who is not a check pilot. In those pairings, the Captain must make all takeoffs and landings at special airports or when visibility is 3/4 mile or less, RVR is 4,000 feet or less, or windshear is reported. The Captain must also make the takeoff and landing when the runway is contaminated, braking action is less than good, or crosswinds exceed 15 knots. In addition, either the PIC or SIC must have at least 75 hours of line operating flight time in that airplane type (14 CFR 121.438(b)).

Flight attendant and aviation mechanic (AMT) career requirements

Under 14 CFR 121.434(e), new flight attendants must complete at least 5 hours of supervised operating experience (not as a required crewmember), though up to 50 percent (2.5 hours by our calculation from 14 CFR 121.434(e)) may be substituted in an approved full-scale cabin training device. Flight attendants and dispatchers must complete recurrent ground training and a competence check every 12 calendar months (14 CFR 121.433(c)).

Under 14 CFR Part 65, Subpart D, the FAA issues the Aviation Mechanic certificate with Airframe (A), Powerplant (P), or both (A&P) ratings. While an A&P certificate is not an FAA regulatory requirement for airline mechanic employment (non-certificated technicians may work under supervision or under a Part 121 carrier's authority), only certificated individuals or those authorized under Part 121 procedures can approve an aircraft or component for return to service. Under 14 CFR 121.7, working as an ETOPS Qualified Person requires completing the certificate holder's ETOPS training program.

  • A&P eligibility: At least 18 years old and able to read, write, speak, and understand English.
  • A&P experience pathways: Graduate from an FAA-approved Aviation Maintenance Technician School (AMTS), complete a military JSAMTCC course, or document practical experience based on a 40-hour work week (18 months for one rating, or 30 months working concurrently on both Airframe and Powerplant).
  • A&P testing: Register for an FAA Tracking Number (FTN) in IACRA, get testing authorization on FAA Form 8610-2 from a FSDO inspector (or present an AMTS graduation certificate), pass the General, Airframe, and Powerplant written tests (up to 2 hours per test, 70 percent minimum score), and pass the oral and practical (O&P) tests with a Designated Mechanic Examiner (DME) within 24 months.

Daily flight deck compliance, recency, and recurrent checks

Under 14 CFR Part 121, flight crewmembers must use approved cockpit check procedures rather than relying on memory. Before every flight, each pilot must personally preflight their oxygen equipment (fit, function, connection, supply, and pressure) and inspect the protective breathing equipment (PBE) at their duty station. Only individuals assigned to flight deck duty may hold a flight deck door key, and operators must establish procedures for flight attendants to enter the flight deck if a crewmember becomes incapacitated.

Under 14 CFR 121.439, pilots must complete at least 3 takeoffs and landings in the airplane type (or an approved Level B or higher FFS) every 90 days. If currency lapses, you must re-establish recency under a check pilot with at least 3 takeoffs and landings including a simulated failure of the most critical powerplant, an ILS landing to the carrier's lowest authorized ILS minimum, and a full-stop landing.

Under 14 CFR 121.433, 121.440, and 121.441, all pilots complete recurrent ground and flight training every 12 calendar months. Captains complete a proficiency check every 12 calendar months, a proficiency check or simulator course within the preceding 6 calendar months, and an annual line check over a typical route or airway (for supplemental operations, at least one flight over a Federal airway, foreign airway, or advisory route). First Officers complete a proficiency check or line-oriented flight training every 24 calendar months, and a proficiency check or simulator course every 12 calendar months. Under 14 CFR 121.445, acting as PIC into a designated special airport without a 12-month entry or pictorial qualification requires a ceiling at least 1,000 feet above the lowest MEA, MOCA, or initial approach altitude, and at least 3 miles visibility.

Application checklist for Part 121 airline candidates

Use this checklist written by our team to prepare your credentials before applying to Global X Airlines or any Part 121 carrier.

  • Step 1: Verify your flight time against 14 CFR 61.159, 61.160, and 121.436, separating total time, PIC time, multiengine turbine time, night time (100 hours for ATP), instrument time (75 hours), and cross-country time.
  • Step 2: Apply for FAA Pilot Records Database (PRD) access at least 7 days before use (14 CFR 111.305) and log in at least once every 365 days.
  • Step 3: Audit your 5-year employment history and FAA records in the PRD (14 CFR 111.135 and 111.310). Reporting entities must correct identified errors within 10 days or initiate dispute investigation within 30 days (14 CFR 111.250).
  • Step 4: Sign your PRD written consent and separate National Driver Register (NDR) consent for the hiring carrier (14 CFR 111.310).
  • Step 5: Review Part 121 operational control rules, IOE and consolidation rules (25 hours IOE, 100 hours in 120 days), and high-minimums SIC weather limits before your technical interview.

Practice example

As a new Part 121 First Officer on a turbojet transport, what are your consolidation of knowledge and skills requirements after passing your proficiency check, and what weather or runway conditions require the Captain to make the takeoff and landing while you are still under 100 hours in type?

Example answer, written by us. It is not a real applicant's story. Under 14 CFR 121.434, once I pass my type rating practical test or Part 121.441 proficiency check, I have 120 days to log at least 100 hours of line operating flight time for consolidation of knowledge and skills. Those 100 hours include the 25 hours and 4 operating cycles of Initial Operating Experience required in a Group II turbojet airplane. If I do not reach 100 hours by day 120, the company can extend my window to a maximum of 150 days, provided I complete refresher training or pass a supervised line observation flight with a check pilot on or before the 120th day. Also, under 14 CFR 121.438, while I have fewer than 100 hours as second in command in that airplane type under Part 121 and I am flying with a regular line Captain who is not a check pilot, the Captain must make all takeoffs and landings at special airports or whenever prevailing visibility is 3/4 mile or less, RVR is 4,000 feet or less, the runway has water, snow, or slush, braking action is reported less than good, crosswinds exceed 15 knots, or windshear is reported.

This answer cites the exact flight time, day limits, and extension rules from 14 CFR 121.434 alongside all six specific weather and runway triggers in 14 CFR 121.438. It shows an interview panel that you know both your personal training milestones and how to brief crew pairing limitations on the line.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

What are the FAA pilot qualification requirements for a Part 121 airline?

Under 14 CFR 121.436, First Officers must hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the airplane being flown. Captains must hold an unrestricted ATP certificate, an aircraft type rating, and at least 1,000 hours of qualifying air carrier flight time (such as Part 121 SIC time or qualifying Part 135/91K PIC time, with up to 500 hours of multiengine turbine military PIC time creditable).

How does the FAA Pilot Records Database (PRD) affect my airline application?

Under 14 CFR 111.105, a Part 121 carrier cannot permit you to begin service as a pilot until it evaluates your FAA certificate and testing history, past employer training and disciplinary records, 5-year employment history, and National Driver Register driving records in the PRD. You must apply for PRD access at least 7 days before granting written consent, and log in at least once every 365 days to keep your account active.

How does operational control differ between domestic or flag and supplemental Part 121 operations?

Under 14 CFR 121.107, certificate holders conducting domestic or flag operations must maintain adequate dispatch centers at necessary locations to ensure operational control of each flight. Supplemental operators using a flight following system must demonstrate under Part 121 that their designated operational control personnel can perform required flight following duties and that current manuals are accessible in English at all times.

What emergency evacuation standards must Part 121 flight attendants meet?

Under 14 CFR 121.291, flight attendants must complete an FAA-approved training program for the specific airplane type and model and pass a written or practical examination.

Do you need an A&P certificate to work as a Part 121 airline mechanic?

Possessing an FAA Aviation Mechanic certificate with Airframe and Powerplant (A&P) ratings is not an FAA regulatory requirement to be employed as an airline mechanic, as non-certificated technicians may work under supervision or under a Part 121 carrier's authority. However, only certificated individuals or those authorized under Part 121 procedures can approve an aircraft for return to service, and performing ETOPS maintenance requires completing the carrier's ETOPS training program under 14 CFR 121.7.

Sources