GlobalX Airlines Careers: FAA Part 121 Qualifications, Training, and Prep Guide

Short answer: If you are preparing for GlobalX Airlines careers, US airline First Officers under 14 CFR 121.436 must hold an Airline Transport Pilot certificate and an aircraft type rating. An unrestricted airplane ATP requires at least 1,500 hours of total pilot time under 14 CFR 61.159, and pilots, flight attendants, and dispatchers must complete FAA-approved Part 121 training before line duty. Confirm open positions, crew bases, and role-specific minimums on the airline's official careers page.

Part 121 Career Tracks for GlobalX Applicants

If your goal is GlobalX Airlines careers, preparing for a US airline role splits into two steps. First, for operations conducted under 14 CFR Part 121, crewmembers must satisfy Federal Aviation Administration qualification rules governing domestic, flag, and supplemental carriers. Second, you must match the vacancy profile posted on the airline's official careers portal.

Federal rules establish distinct qualification tracks for First Officers, Captains, flight attendants, aircraft dispatchers, flight instructors, and check pilots. Non-certificated corporate jobs, maintenance roles, crew bases, fleet assignments, compensation, and benefits change with hiring cycles, so confirm current terms on the carrier's careers portal and in your recruiter invitation email.

Regulated Part 121 Operational Career Tracks (14 CFR Part 121 Subparts N and O)

Career Track Federal Certificate Prerequisite Resource Management Initial Line or Competence Requirement
First Officer (Second in Command) ATP or Restricted ATP and aircraft type rating Approved initial CRM Flight deck familiarization, check-pilot OE, and line consolidation
Captain (Pilot in Command) Unrestricted ATP, aircraft type rating, 1,000 qualifying hours Approved initial CRM Check-pilot OE, FAA leg observation, and line consolidation
Flight Attendant (Cabin Crew) Carrier FAA-approved Subpart N initial ground training Approved initial CRM Supervised inflight OE and competence check
Aircraft Dispatcher Carrier written curriculum per airplane type Approved initial DRM Instructor proficiency certification and competence check

First Officer Minimums: Standard ATP vs. Restricted ATP

Under 14 CFR 121.436(b), a Part 121 second in command must hold an Airline Transport Pilot certificate and an appropriate aircraft type rating. A second-in-command type rating issued under 14 CFR 61.55 does not satisfy Part 121 requirements. If you apply without the specific turbojet type rating, 14 CFR 61.157(c) allows Part 121 employees to earn the type rating concurrently through the carrier's FAA-approved training program.

An unrestricted multiengine airplane ATP under 14 CFR 61.153 and 61.159 requires minimum age 23, English language proficiency, a commercial pilot certificate with an instrument rating (or qualifying military or foreign equivalent), and at least 1,500 hours of total pilot time. Those 1,500 hours must include at least 500 cross-country hours, 100 night hours, 75 actual or simulated instrument hours, 50 hours in the airplane class sought, and 250 hours as pilot in command (or supervised SIC performing PIC duties), including 100 PIC cross-country hours and 25 PIC night hours.

Qualifying military and collegiate pilots can obtain a restricted privileges ATP (R-ATP) at age 21 under 14 CFR 61.153(a)(2) and 61.160. Per FAA ATP training guidance, an R-ATP allows you to serve as a co-pilot until reaching 1,500 hours, except in flag or supplemental operations requiring three or more pilots (14 CFR 61.167(b)(2)). By our calculation from 14 CFR 61.159 and 61.160, R-ATP pathways cut the 1,500-hour total time minimum by 750 hours for qualifying military pilots, 500 hours for eligible aviation bachelor's graduates, and 250 hours for eligible associate's graduates. Each R-ATP pathway also lowers the cross-country minimum by 300 hours, from 500 to 200 hours.

FAA Airplane Multiengine ATP Experience Pathways (14 CFR 61.153, 61.159, and 61.160)

ATP Pathway Minimum Age Total Pilot Time Cross-Country Minimum Qualifying Background
Unrestricted ATP 23 years 1,500 hours 500 hours Civilian, Part 135, flight instructor, or military flight experience
Cross-Country R-ATP 21 years 1,500 hours 200 hours Meets standard ATP minimums except holds 200 to 499 cross-country hours
Associate or Partial R-ATP 21 years 1,250 hours 200 hours Authorized aviation program with at least 30 semester credits and Part 141 training
Bachelor Degree R-ATP 21 years 1,000 hours 200 hours Authorized aviation bachelor's with 60 semester credits and Part 141 training
US Military R-ATP 21 years 750 hours 200 hours Honorably discharged or active US Armed Forces pilot training graduate

Captain Upgrade and Direct-Entry PIC Rules

To upgrade from First Officer or apply as a direct-entry Captain under 14 CFR 121.436(a), you must hold an unrestricted ATP certificate free of 14 CFR 61.167 limitations and an appropriate aircraft type rating. You also need at least 1,000 hours in qualifying air carrier or commercial operations. Those 1,000 hours can come from Part 121 second-in-command time or fractional ownership PIC time under 14 CFR 91.1053(a)(2)(i). You may also count commuter or turbojet PIC time under 14 CFR 135.243(a)(1), eligible on-demand PIC time satisfying 14 CFR 135.4(a)(2)(ii)(A), or Part 121 PIC time logged prior to July 31, 2013.

Current and former military aviators may credit up to 500 hours of military flight time toward that 1,000-hour requirement. The time must be obtained as pilot in command of a multiengine, turbine-powered, fixed-wing airplane or powered-lift aircraft in an operation requiring more than one pilot.

ATP CTP, Medical Certificates, and Foreign License Conversion

Before taking the knowledge test for a multiengine airplane ATP certificate or concurrent type rating, 14 CFR 61.153(e) and 61.156 require graduation from an authorized ATP Certification Training Program (ATP CTP). By our calculation from 14 CFR 61.156, the ATP CTP totals at least 40 hours of instruction: 30 classroom hours (8 on high-altitude aerodynamics, 2 on meteorology, 14 on air carrier operations, and 6 on leadership, CRM, and safety culture) plus 10 flight simulation hours. At least 6 simulator hours must use a Level C or higher full flight simulator representing a multiengine turbine airplane rated at 40,000 pounds or more maximum takeoff weight.

Under FAA medical certification policy, pilots must submit Items 1 through 20 of FAA Form 8500-8 online via FAA MedXPress before visiting an Aviation Medical Examiner. Under 14 CFR 61.53 and FAA aerospace medicine policy, pilots must never fly with a disqualifying condition or medication side effect and must observe a 48-hour no-fly interval after each dose of an approved COVID-19 vaccine.

International applicants with US work authorization can satisfy the commercial and instrument prerequisite for an FAA ATP under 14 CFR 61.153(d)(3) using an unrestricted ICAO contracting-state ATP or commercial and instrument license.

Pilot Records Database (PRD) and Background Screening

Air carriers conducting Part 121 and Part 135 operations use the FAA Pilot Records Database (PRD) Reviewing Entity portal to view pilot records that an applicant has consented to share. Through the PRD Pilot User Portal, you can view your own pilot records and share them with an employer, while reporting entities load employer records and respond to records requests.

Per the FAA PRD portal, pilot registration requires a Commercial, ATP, or Remote pilot certificate and a valid FAA medical certificate. Private Pilots cannot access the PRD system. Starting mid-November 2026, PRD user accounts automatically disable after 365 days of inactivity unless you log in at least once a year, requiring contact with PRD Support for reactivation. For PRD Part 111 compliance or AC 120-68J guidance questions, contact your Flight Standards District Office or Certificate Management Office.

Part 121 Training, Simulators, and Line Consolidation

Newly hired Part 121 pilots train under an FAA-approved Subpart N and O curriculum conducted by the air carrier or a contracted Part 142 training center (14 CFR 121.402). Ground instruction covers carrier procedures, aircraft systems, emergencies, and Crew Resource Management (14 CFR 121.403, 121.404). Simulator sessions follow and must use an approved Full Flight Simulator for low-altitude windshear and extended envelope maneuvers (14 CFR 121.407(d), (e)).

Before starting operating experience, newly hired Part 121 pilots who began basic indoctrination on or after April 27, 2022 must complete operations familiarization (14 CFR 121.435). This requires observing at least 2 Part 121 operating cycles from the flight deck observer seat using an operational headset. Group II turbojet initial operating experience then requires at least 25 hours (15 hours for SIC transition) and at least 4 operating cycles, including 2 cycles as pilot flying, under check pilot supervision (14 CFR 121.434(c)). Qualifying initial or upgrade Captains must also be observed by an FAA inspector on at least 1 flight leg with a takeoff and landing.

After passing your type rating practical test or 14 CFR 121.441 proficiency check, both Captains and First Officers must acquire at least 100 hours of line operating flight time for consolidation of knowledge and skills (including OE) within 120 days. The carrier may extend that period to at most 150 days if you complete refresher training or pass a supervised check pilot flight on or before day 120.

Flight Attendant and Aircraft Dispatcher Requirements

Part 121 aircraft dispatchers must complete a written curriculum for each airplane type dispatched and approved Dispatcher Resource Management training. Both flight attendants and dispatchers must complete recurrent ground training and pass a competence check within every preceding 12 calendar months.

7-Step Readiness Checklist Before You Apply

Organizing your federal records before submitting an application prevents screening delays once a recruiter reviews your file. Use our team's 7-step readiness checklist alongside the application instructions on the airline's official careers page.

    1. Keep PRD access active: Log into the FAA PRD Pilot User Portal at least once a year so your account is not disabled after 365 days of inactivity.
    1. Review your PRD profile early: Confirm you hold a Commercial, ATP, or Remote pilot certificate and valid FAA medical so you can view your pilot records before sharing them with an employer.
    1. Reconcile your employment and training dates: Match start and completion dates across your resume and logbooks so there are no unexplained gaps.
    1. Gather training certificates: Locate your ATP Certification Training Program graduation certificate (14 CFR 61.156) and any prior carrier training records.
    1. Tally flight hours by FAR bucket: Separate total time, PIC, cross-country, night, instrument, simulator credits (capped at 100 hours under 14 CFR 61.159(a)(6)), and qualifying Part 121 upgrade hours.
    1. Complete FAA MedXPress early: Submit Form 8500-8 Items 1 through 20 online and confirm your medical certificate class matches the job posting.
    1. Practice telling your own operational stories: Refresh 14 CFR 61.155 ATP knowledge topics and rehearse honest crew stories out loud without memorized scripts.

How to Prepare for Technical and CRM Interviews

Part 121 pilot interviews test aeronautical fundamentals and how you work with another crewmember when plans change. Anchor your technical review in the 14 CFR 61.155 ATP knowledge areas: Federal Aviation Regulations, frontal meteorology and icing, NOTAM and chart interpretation, windshear and microburst avoidance, instrument departure and approach procedures, transport weight and balance, high-altitude aerodynamics, and human factors.

For behavioral and scenario questions, avoid generic scripts. Share real flights showing standard operating procedure discipline and calm coordination with dispatch, maintenance, and cabin crew. If your training history includes a practical test failure or an unsatisfactory proficiency check, state what happened plainly in two sentences, own your mistake, and explain the habit you changed afterward.

Practice example

Tell me about a time you caught a subtle operational or preflight discrepancy when the schedule was tight, and walk me through how you handled it with your crew.

Example answer written by our team. The applicant is invented. While flying Part 135 charter legs last winter, our crew had a 45-minute turn before a late-afternoon repositioning flight. During my walkaround, I noticed hydraulic fluid streaking along the right main gear door hinge that had not been present on arrival. My captain was finishing the weight and balance paperwork on the flight deck and wanted to push before a line of snow showers reached the field. Instead of rushing or assuming it was residual fluid, I took a clear photo, returned to the flight deck, and asked the captain to inspect the strut and actuator with me. Together we contacted maintenance control, grounded the airplane under our minimum equipment procedures until a mechanic could inspect the seal, and coordinated with dispatch to rebook the positioning leg for the next morning. The mechanic found a nicked actuator O-ring that would have worsened under pressure. Speaking up calmly and bringing clear evidence kept our crew aligned and protected the flight.

The answer uses a real operational conflict with schedule pressure, shows collaborative Crew Resource Management rather than confrontation, and walks through standard maintenance and dispatch coordination step by step. It stays concise and focuses on specific actions and outcomes.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

When preparing for GlobalX Airlines careers, how many flight hours do Part 121 First Officers need?

Under 14 CFR 121.436(b) and 61.159, an unrestricted Airline Transport Pilot certificate requires at least 1,500 hours of total pilot time, while 14 CFR 61.160 lets eligible military pilots (750 hours) and authorized aviation degree graduates (1,000 or 1,250 hours) fly as second in command with a restricted ATP. Check the airline's official job posting to confirm whether an open role accepts R-ATP minimums or sets higher hours.

Do you need an aircraft type rating before applying to a Part 121 carrier?

You must hold an appropriate aircraft type rating before serving as a Part 121 Captain or First Officer, and a 14 CFR 61.55 second-in-command type rating does not qualify. However, 14 CFR 61.157(c) and (f) allow Part 121 employees to earn their aircraft type rating through the airline's FAA-approved training program and proficiency check.

What hours count toward the 1,000-hour Part 121 Captain upgrade requirement?

The 1,000 hours must come from Part 121 SIC time, qualifying Part 91K fractional PIC time (14 CFR 91.1053(a)(2)(i)), commuter or turbojet Part 135 PIC time (14 CFR 135.243(a)(1)), eligible multi-crew on-demand Part 135 PIC time, or pre-July 31, 2013 Part 121 PIC time. Qualifying US military pilots may also credit up to 500 multiengine turbine multi-pilot PIC hours.

Who can register for the FAA Pilot Records Database and share records with an airline?

To register for the FAA Pilot Records Database Pilot User Portal, you must hold a Commercial, Airline Transport Pilot, or Remote pilot certificate and a valid FAA medical certificate. Once registered, you can view your pilot records and grant consent for an air carrier's authorized reviewing entity to view them, and starting mid-November 2026 you must log in at least once every 365 days to prevent account deactivation.

What FAA training is required for Part 121 flight attendants and dispatchers?

Flight attendants must complete FAA-approved initial ground training, Crew Resource Management training, and supervised inflight operating experience before serving as required crewmembers. Aircraft dispatchers must complete a type-specific written curriculum, Dispatcher Resource Management training, and an instructor proficiency certification before assuming operational duties.

Sources