GoJet Airlines Careers: Pilot Pathways, Flight Attendant Rules, A&P Maintenance, and United Aviate Guide
Short answer: GoJet Airlines hires pilots, flight attendants, FAA-licensed Airframe and Powerplant (A&P) mechanics, maintenance apprentices, and corporate staff to operate more than 250 daily Bombardier CRJ-550 flights across over 50 destinations, according to GoJet's Pilot Careers page. Backed by a 10-year United Airlines contract, GoJet connects pilots to the United Aviate pathway, runs six-week cabin crew training at its St. Louis, Missouri headquarters, and operates an FAA Part-145 Large Aircraft Repair Station in St. Louis.
How GoJet Airlines Fits Into United Express Operations
GoJet Airlines flies exclusively for United Airlines under a 10-year commercial contract, operating more than 250 daily flights to over 50 destinations. Every passenger flight runs on the Bombardier CRJ-550, a regional jet that serves as the cornerstone of GoJet's fleet. Because the airline operates a single aircraft type under one mainline partner, pilots, flight attendants, and maintenance technicians train on standardized procedures rather than splitting qualifications across multiple fleets.
Hiring at GoJet spans five primary operational entry points plus corporate support roles. Flight deck candidates enter through the Wingman student pathway, as First Officers, or as Direct Entry Captains. Cabin crew join through GoJet's Flight Attendant training program at corporate headquarters in St. Louis, Missouri, while technical candidates join either as FAA-certificated A&P mechanics or through the St. Louis Aircraft Maintenance Apprentice Program.
Corporate headquarters, the Flight Attendant Training Center, new-hire Part 121 pilot ground school visits, and the airline's FAA Part-145 Maintenance, Repair, and Overhaul (MRO) hangar sit in St. Louis, Missouri at St. Louis Lambert International Airport. Some third-party job blogs misstate GoJet's headquarters state, so plan any training stay or maintenance relocation around St. Louis, Missouri and confirm open crew domiciles directly on GoJet's active job postings when you apply.
Pilot Careers: First Officer and Direct Entry Captain Minimums
GoJet splits active Part 121 flight deck hiring between right-seat First Officers building airline time and Direct Entry Captains stepping straight into the left seat. According to GoJet's 2026 First Officer and Direct Entry Captain pages, First Officer applicants need an Airline Transport Pilot (ATP) certificate, Restricted ATP (R-ATP), or Commercial Multi-Engine Land certificate with an Instrument Rating, plus a completed ATP Certification Training Program (ATP-CTP) certificate and a passed FAA ATP written knowledge exam. You must also hold a current FAA First Class Medical, an FCC Radio Operator's Permit, United States work eligibility, and a valid passport that lets you travel in and out of the United States without restriction.
Beyond meeting FAA total-time thresholds for an ATP or R-ATP, GoJet's First Officer qualifications specify four category minimums: 100 night hours, 75 instrument hours, 200 cross-country hours, and 25 multi-engine hours. Direct Entry Captains face higher thresholds designed for experienced First Officers at other carriers who meet left-seat minimums and want to bypass slow upgrade queues. Captain applicants must be at least 23 years old, hold a full ATP certificate, and log at least 1,750 total hours, 100 percent of which must be in fixed-wing aircraft, alongside 1,000 multi-engine hours, 1,000 air carrier hours, and 1,000 turbine hours.
That 100 percent fixed-wing requirement matters if you are transitioning from military or civilian rotorcraft flying. Helicopter hours do not count toward the 1,750-hour Direct Entry Captain floor, whereas First Officer candidates can qualify under applicable R-ATP or ATP total-time rules once they log the 25-hour multi-engine minimum and complete ATP-CTP. Pilots in both tracks receive United Healthcare, Delta Dental, VSP Vision, life insurance, long-term disability and AD&D coverage, sick time, vacation accrued by length of service, a 401(k) with a 50 percent match vested after 1 year, and United Airlines flight benefits with ZED travel options.
GoJet pilot career tracks and minimum qualifications (2026 program pages)
| Qualification or Feature | Wingman Cadet Pathway | First Officer | Direct Entry Captain |
|---|---|---|---|
| Pilot Certificate Needed | Private Pilot Certificate with Instrument Rating | ATP, R-ATP, or Commercial Multi-Engine Land with Instrument Rating | ATP Certificate with Instrument Rating |
| Minimum Age and Medical | Enrolled flight student in good standing, FAA First Class Medical | ATP or R-ATP age rules, current FAA First Class Medical | At least 23 years old, current FAA First Class Medical |
| Total Flight Time Floor | Building hours at any flight school, university, or training program | Meet FAA ATP or R-ATP total time minimums | 1,750 hours total time (100% fixed-wing) |
| Specific Category Hours | Tracked toward R-ATP or ATP completion | 100 night, 75 instrument, 200 cross-country, 25 multi-engine | 1,000 multi-engine, 1,000 air carrier, 1,000 turbine |
| Testing and Permits | US work eligibility and valid passport | ATP-CTP certificate, passed FAA ATP written exam, FCC permit, valid passport | FCC Radio Operator's Permit, US work eligibility, valid passport |
| United Airlines Pathway | Priority FO recruitment and class date selection, United standby after HQ visit | Eligible to apply to United Aviate while flying for GoJet | Eligible for United Aviate with a path to United in as little as 24 months |
United Aviate and the GoJet Wingman Cadet Pathway
GoJet's commercial partnership with United Airlines gives both First Officers and Direct Entry Captains eligibility to apply to United Aviate, United's pilot career development program. Once accepted into Aviate, pilots receive coaching, mentorship, and direct exposure to United's operational culture without needing an additional mainline hiring interview after completing program and hiring requirements. According to GoJet's Direct Entry Captain page, Aviate acceptance gives GoJet Captains a defined path to the right seat of a United Airlines flight deck in as little as 24 months.
Pilots still in flight school can connect with GoJet early through the Wingman Program by submitting a First Officer application on GoJet's Pilot Careers portal. Under GoJet's 2026 Wingman page, eligibility requires active enrollment and good standing at any flight school, university, or professional flight training program, a Private Pilot's License, an Instrument Rating, an FAA First Class Medical Certificate, United States work authorization, and a valid passport. Accepted cadets receive company badging, ongoing mentorship from GoJet's pilot recruiting team, and early access to GoJet Part 121 study materials months before reporting to new-hire class.
Entry into the Wingman Program also includes an all-expenses-paid visit to GoJet's corporate headquarters in St. Louis, Missouri. During that visit, cadets sit in on an active new-hire Part 121 pilot ground school class, meet GoJet management, and tour headquarters and the maintenance hangar. Completing the St. Louis visit activates United Airlines standby travel privileges for the rest of your time in the program, and reaching R-ATP or ATP minimums unlocks priority in First Officer recruiting and training class selection.
Cadets who want campus leadership experience can apply to the Wingman Ambassadors Program. Ambassadors represent GoJet at universities and flight schools nationwide, coordinating and participating in 3 to 4 school visits per quarter. GoJet covers event travel and hotel accommodations, extends eligibility for United Airlines travel benefits, and grants elevated priority for First Officer recruitment during periods when new-hire classes reach capacity.
Flight Attendant Requirements, CRJ-550 Cabin Work, and Training
GoJet flight attendants manage cabin safety and customer service aboard the Bombardier CRJ-550 across United Express routes. Because regional jets operate short and medium legs across shifting weather systems and hub banks, GoJet screens cabin crew applicants for adaptability to variable shift patterns, calm problem-solving during irregular operations, and fluent English reading, writing, and speaking skills.
Before applying, check GoJet's residency, physical, and personal appearance rules on its Flight Attendants page. GoJet also enforces strict appearance standards: candidates must be free from visible tattoos, wear no facial piercings or multiple upper-ear piercings, and avoid extreme hair colors or styles.
Physical qualification centers on safe movement inside the CRJ-550 cabin. Applicants must measure between 4 feet 11 inches and 6 feet 0 inches tall, walk comfortably forward down the aircraft aisle, move quickly through the CRJ-550 over-wing emergency exit, and occupy the flight attendant jump seat without seatbelt extension modifications. Selected candidates attend approximately 6 weeks of new-hire training at GoJet's Flight Attendant Training Center at headquarters in St. Louis, Missouri, culminating in a hands-on evaluation aboard the aircraft, and receive 401(k), medical, dental, and life insurance, hotel and parking provisions, flight benefits, and reduced employee rates on cruises, rental cars, and hotels.
Pay particular attention to GoJet's identification rule before booking an interview. If your middle name is printed on your Driver's License, that exact middle name must also appear on both your Social Security Card and your Passport.
A&P Maintenance Technicians, Apprenticeships, and Part-145 MRO Growth
GoJet's maintenance division grew substantially after earning FAA Part-145 Certification as a Large Aircraft Repair Station in St. Louis, Missouri. Announced alongside GoJet President and CEO Rick Leach and St. Louis Lambert International Airport Director and CEO Rhonda Hamm-Niebruegge, the Part-145 expansion established a commercial Maintenance, Repair, and Overhaul (MRO) facility adding four Heavy Maintenance lines and two Modification lines by October 2024. The maintenance organization also earned two Bluesky Awards: Aircraft Maintenance Organization of the Year (MRO 145) and Aircraft Maintenance Training Organization of the Year (MTO 147).
Qualified A&P applicants must hold both FAA Airframe and Powerplant certificates, possess at least a high school diploma, supply their own personal hand tools, pass pre-employment drug and alcohol screening, lift 50 pounds, stand for extended periods, and hold unrestricted eligibility to operate company vehicles and ramp equipment. Mechanics receive health, dental, and vision coverage, 401(k) matching, United Airlines travel benefits, reduced hotel and rental car rates, 25 percent off all Sonic Tools, and advancement paths into heavy checks, interiors, composites, and aircraft modifications.
Candidates who do not yet hold FAA certificates can enter through the STL Aircraft Maintenance Apprentice Program in St. Louis. Apprentices work hands-on beside licensed A&P technicians to log practical experience toward an FAA testing sign-off and full A&P licensure. GoJet covers the cost of FAA General, Airframe, and Powerplant exam prep courses while providing health, dental, vision, and life insurance, a 401(k), and United Airlines standby travel for employees and eligible family members.
Cross-Border Credentials and North American Regional Context
Regional jet flying across North America routinely touches cross-border airspace and international diversion alternates, which is why every GoJet pilot track requires both legal authorization to work in the United States and a valid passport permitting unrestricted travel into and out of the USA. As Transport Canada's aviation careers overview outlines, Canadian commercial pilots, flight attendants, and aircraft maintenance engineers train and qualify under separate Canadian regulatory tracks, whereas US pilot and mechanic certificates are issued through Federal Aviation Administration airmen licensing and certification, so dual citizens or cross-border applicants must hold US work authorization and complete FAA ATP, R-ATP, Commercial Multi-Engine, or FAA Airframe and Powerplant certification before applying to GoJet.
Recruiting Events, Pre-Application Checklist, and Interview Prep
GoJet recruits year-round online and meets pilot and maintenance candidates in person at university aviation days and technical academies. On GoJet's November 2026 events calendar, for example, pilot recruiters are scheduled to join United Airlines for Embry-Riddle Aeronautical University Prescott's United Day on November 19 from 9:00 am to 7:00 pm CST to review GoJet and United Aviate pathways, while Maintenance Recruiting is scheduled to visit US Aviation Academy in Atlanta on November 19 from 3:30 pm to 5:30 pm CST to meet aspiring A&P technicians. Checking GoJet's Events calendar before submitting an online application lets you pair your digital file with an in-person recruiter conversation.
Use our team's pre-application and interview readiness checklist below to eliminate preventable paperwork delays before your recruiter screen.
When preparing for a pilot, cabin crew, or maintenance interview, avoid memorized internet scripts. Airline interviewers listen for clear aeronautical decision-making, personal accountability when a flight or shift goes off plan, and genuine familiarity with the role you are applying to fill. Practice telling your own operational stories out loud, review your logbook totals or technical fundamentals line by line, and be ready to explain how your habits fit a single-fleet CRJ-550 United Express operation.
- Match all three IDs character for character: lay your Driver's License, Social Security Card, and Passport side by side today and order updated replacements early if a middle name, middle initial, or hyphen differs on any card.
- Separate fixed-wing from rotorcraft hours: if applying for Direct Entry Captain, verify at least 1,750 fixed-wing hours plus 1,000 multi-engine, 1,000 turbine, and 1,000 air carrier hours in clean logbook columns.
- Gather pilot testing and medical certificates: confirm your FAA First Class Medical is current, your FCC Radio Operator's Permit is downloaded, and your ATP-CTP graduation certificate and FAA ATP written score report are ready for First Officer upload.
- Inventory A&P licenses and personal tools: confirm both FAA Airframe and Powerplant ratings appear on your certificate and prepare a current personal tool list before meeting maintenance recruiters.
- Rehearse three real operational stories out loud: prepare one example each of handling weather or time pressure, resolving a crew or customer disagreement calmly, and catching a safety detail before departure.
Practice example
Tell me about a time in flight training or line operations when an unexpected change forced you to revise your plan under time pressure.
Example answer written by our team. The applicant is invented. During a night cross-country lesson with an instrument student, destination weather dropped faster than forecast as fog rolled across our planned airport thirty minutes before arrival. My student wanted to hurry the descent and shoot the approach immediately before visibility fell below minimums. Instead of rushing, I had him level off outside the terminal area, hold at a published fix, and pull the latest weather and fuel numbers together. Our alternate twenty-five miles inland still reported clear skies and calm winds, while our primary field showed zero spread between temperature and dewpoint. Walking through those numbers out loud helped my student see that diverting early left us well above reserve fuel without flying an unstable, rushed approach into thickening fog. We diverted cleanly, briefed what subtle coastal moisture trends we could have caught earlier on preflight, and logged a calm night landing. That flight reinforced that slowing the cockpit pace early protects safety margins when weather shifts.
This answer sets up a concrete operational scenario, owns the cockpit pace when time pressure builds, and backs the diversion call with objective weather and fuel margins. Closing with a specific preflight lesson demonstrates mature aeronautical decision-making without sounding rehearsed.
Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview
Frequently asked questions
How quickly can a GoJet pilot move to United Airlines through Aviate?
Both First Officers and Direct Entry Captains flying at GoJet are eligible to apply to the United Aviate pilot development program. According to GoJet's Direct Entry Captain page, acceptance into Aviate gives GoJet Captains a direct pathway to the right seat of a United Airlines flight deck in as little as 24 months.
What flight hours do you need to become a GoJet Direct Entry Captain?
Under GoJet's 2026 Direct Entry Captain requirements, applicants must be at least 23 years old and hold an ATP certificate with an Instrument Rating, a current FAA First Class Medical, an FCC Radio Operator's Permit, US work eligibility, and a valid passport. Minimum flight experience is 1,750 total hours (100 percent fixed-wing), including 1,000 multi-engine hours, 1,000 air carrier hours, and 1,000 turbine hours.
How does the GoJet Wingman Program work for student pilots?
Flight students in good standing who hold a Private Pilot's License, Instrument Rating, FAA First Class Medical, US work eligibility, and a valid passport receive recruiting mentorship, company badging, early study materials, and an all-expenses-paid visit to GoJet headquarters in St. Louis, Missouri. Completing that St. Louis visit unlocks United Airlines standby travel and priority for First Officer interviews and class dates once you hit R-ATP or ATP minimums.
What are GoJet Airlines' height, tattoo, and ID rules for flight attendants?
Applicants must be at least 19 years old, measure between 4 feet 11 inches and 6 feet 0 inches tall, occupy the CRJ-550 jump seat without seatbelt extension modifications, and have no visible tattoos, facial piercings, multiple upper-ear piercings, or extreme hair styles. Your Driver's License, Social Security Card, and Passport must also display identical name formatting.
Can you join GoJet maintenance without an FAA A&P license?
Frontline technician openings require both FAA Airframe and Powerplant licenses and personal tools, while unlicensed candidates can apply to the STL Aircraft Maintenance Apprentice Program in St. Louis. Apprentices gain hands-on experience under licensed A&P technicians toward their FAA sign-off and receive fully covered prep courses for the General, Airframe, and Powerplant exams.
Sources
- GoJet Airlines Pilot Careers
- GoJet Airlines First Officer Qualifications
- GoJet Airlines Direct Entry Captain Program
- GoJet Airlines Wingman Cadet Pathway
- GoJet Airlines Flight Attendant Careers
- GoJet Airlines Maintenance and MRO Careers
- Why GoJet Airlines
- GoJet Airlines Recruiting Events
- Transport Canada Careers in Aviation
- Federal Aviation Administration Licenses and Certificates