How to Get an ATP License: Complete FAA Requirements and Step-by-Step Guide
Short answer: To get an unrestricted FAA Airline Transport Pilot (ATP) license in the airplane category, you must be at least 23 years old, hold a commercial pilot certificate with an instrument rating, and log at least 1,500 hours of total flight time under 14 CFR 61.159. If you seek a multiengine class rating, you must also log 50 hours in multiengine airplanes, graduate from the 40-hour Airline Transport Pilot Certification Training Program (ATP CTP) under 14 CFR 61.156, and pass both the FAA knowledge test and practical test. Military pilots and qualifying aviation degree graduates can apply for a Restricted Privileges ATP (R-ATP) at age 21 with 750, 1,000, or 1,250 total hours under 14 CFR 61.160.
What an ATP certificate is, who needs one, and general eligibility
Every pilot operating under 14 CFR Part 121 air carrier rules must hold an Airline Transport Pilot (ATP) certificate in the airplane category with a multiengine class rating and an appropriate aircraft type rating, as set out in FAA Notice 8900.225 and 14 CFR 121.436. An ATP certificate is also required to serve as pilot in command (PIC) in certain commuter and fractional ownership operations under 14 CFR 135.243(a)(1) and 14 CFR 91.1053(a)(2)(i).
The FAA issues two versions of the multiengine airplane certificate: a standard (unrestricted) ATP under 14 CFR 61.159 and a Restricted Privileges ATP (R-ATP) under 14 CFR 61.160. An R-ATP allows you to fly as second in command (SIC, or first officer) in Part 121 domestic, flag, and supplemental operations that require two pilots. You cannot act as PIC in any operation requiring an ATP certificate, and you cannot serve as SIC in flag or supplemental operations requiring three or more pilots, until the restriction is removed.
Under 14 CFR 61.23, you must hold a first-class medical certificate to exercise PIC privileges of an ATP certificate or to serve as SIC in flag or supplemental operations requiring three or more pilots. To serve as SIC in standard two-pilot Part 121 operations, you only need to hold at least a second-class medical certificate.
Under 14 CFR 61.153, you must be at least 23 years old for an unrestricted ATP certificate, or at least 21 years old for a Restricted Privileges ATP certificate under 14 CFR 61.160. Under 14 CFR 61.35, you only need to be 18 years old to sit for the ATP multiengine knowledge test once you hold your ATP CTP graduation certificate. You must also be able to read, speak, write, and understand the English language, be of good moral character, and hold prerequisite pilot credentials from one of three qualifying tracks.
- Civilian FAA track: Hold a commercial pilot certificate with an instrument rating issued under 14 CFR Part 61.
- U.S. military track: Meet the military experience requirements under 14 CFR 61.73 to qualify for a commercial pilot certificate and an instrument rating as a rated military pilot or former rated military pilot of the U.S. Armed Forces.
- Foreign license track: Hold either a foreign airline transport pilot license with instrument privileges or a foreign commercial pilot license with an instrument rating issued by a contracting State to the Convention on International Civil Aviation (ICAO) with no geographical limitations.
Unrestricted ATP flight hour requirements (14 CFR 61.159)
To qualify for an unrestricted ATP certificate in the airplane category under 14 CFR 61.159, you must log at least 1,500 hours of total time as a pilot, including specific sub-minimums across five categories. A single flight can count toward multiple sub-minimums at once, such as a night cross-country flight logged as pilot in command.
By our calculation from 14 CFR 61.159, the 250-hour airplane PIC requirement equals 16.7 percent of the 1,500 total hours required, meaning up to 1,250 hours of your total pilot time can come from dual instruction received, student solo flight, or qualifying second-in-command time. Use the table below to audit your logbook against the exact regulatory minimums and simulator credit caps.
14 CFR 61.159 Airplane Category Aeronautical Experience Minimums
| Experience Category | Minimum Hours Required | Simulator Credit Limits and Special Rules (14 CFR 61.159) |
|---|---|---|
| Total time as a pilot | 1,500 hours | Up to 100 hours may be obtained in an FFS or FTD representing an airplane in an approved Part 121, 135, 141, or 142 course. |
| Cross-country time | 500 hours | Reduced to 200 hours for R-ATP applicants under 14 CFR 61.160. |
| Night flight time | 100 hours | If you have logged at least 20 night takeoffs and landings to a full stop, each additional night full-stop takeoff and landing substitutes for 1 hour of night flight time, up to 25 hours. |
| Flight time in class of airplane sought | 50 hours | Up to 25 hours in a full flight simulator (FFS) representing the class may be credited if done in an approved Part 121, 135, 141, or 142 course. FTDs and ATDs cannot be used. |
| Instrument flight time (actual or simulated) | 75 hours | Up to 25 hours in an FFS or FTD representing an airplane (or up to 50 hours if completed in a Part 142 certificated training center course). |
| Airplane PIC (or supervised SIC performing PIC duties) | 250 hours | Must include at least 100 hours of cross-country PIC time and 25 hours of night PIC time. |
Restricted Privileges ATP (R-ATP) pathways (14 CFR 61.160)
If you are at least 21 years old, 14 CFR 61.160 allows you to apply for a multiengine airplane ATP certificate (or an ATP certificate concurrently with a multiengine airplane type rating) with restricted privileges across four eligibility pathways.
Every R-ATP applicant must still meet the night, instrument, PIC, and 50-hour class minimums of 14 CFR 61.159, with one major reduction: under 14 CFR 61.160(e) and (f), all R-ATP pathways require at least 200 hours of total cross-country flight time instead of 500 hours. You must still log the 100 hours of PIC cross-country time required under 14 CFR 61.159(a)(5)(i)(A).
To use either collegiate aviation degree pathway, your college or university must hold an FAA Letter of Authorization (LOA) issued under 14 CFR 61.169, and your official transcript or certifying document must confirm that you completed the ground and flight training for your commercial pilot certificate and instrument rating as part of an approved Part 141 curriculum at the institution or an associated Part 141 pilot school.
Restricted Privileges ATP (R-ATP) Pathways Under 14 CFR 61.160
| R-ATP Pathway | Minimum Age | Minimum Total Time | Minimum Cross-Country Time | Key Qualification and Documentation (14 CFR 61.160) |
|---|---|---|---|---|
| U.S. Military Pilot (61.160(a)) | 21 | 750 hours | 200 hours | Graduated from a U.S. Armed Forces undergraduate pilot training school as a rated military pilot. Present Form DD-214 (honorable discharge) or active duty record. |
| Bachelor's Degree in Aviation, 60+ Credits (61.160(b)) | 21 | 1,000 hours | 200 hours | Bachelor's degree with an aviation major, 60 semester credit hours of FAA-recognized aviation coursework, Part 141 commercial/instrument training, and institutional certifying statement. |
| Associate's or Bachelor's Degree in Aviation, 30+ Credits (61.160(c)-(d)) | 21 | 1,250 hours | 200 hours | Associate's or Bachelor's degree with an aviation major, 30 to 59 semester credit hours of FAA-recognized aviation coursework, Part 141 commercial/instrument training, and institutional certifying statement. |
| Age 21 with 1,500 Hours (61.160(f)) | 21 | 1,500 hours | 200 hours | Meet all 14 CFR 61.159 requirements except age 23 and the 500-hour cross-country requirement. |
Step-by-step: How to get your ATP license
For an airplane category single-engine class rating, the ATP CTP course is not required. For an airplane category multiengine class rating or an ATP certificate issued concurrently with a multiengine airplane type rating, follow these five mandatory steps.
- Step 1: Earn your Commercial Pilot Certificate and Instrument Rating (or establish military eligibility under 14 CFR 61.73 or qualifying foreign ICAO license eligibility under 14 CFR 61.153(d)(3)).
- Step 2: Complete an FAA-approved Airline Transport Pilot Certification Training Program (ATP CTP) under 14 CFR 61.156 at an authorized Part 121, 135, 141, or 142 provider and receive your graduation certificate.
- Step 3: Present your ATP CTP graduation certificate and pass the FAA ATP Multiengine Airplane (ATM) knowledge test (eligible at age 18, valid for 60 calendar-months).
- Step 4: Build and audit your flight hours to meet every requirement in 14 CFR 61.159 (unrestricted) or 14 CFR 61.160 (R-ATP), including at least 50 hours in multiengine airplanes.
- Step 5: Submit your application on FAA Form 8710-1 (with your military records or university certifying transcript if applying for an R-ATP) and pass the ATP practical test under 14 CFR 61.157(e).
ATP CTP course, knowledge test, and practical test (14 CFR 61.156 and 61.157)
Under 14 CFR 61.156, you must present a graduation certificate from an approved ATP CTP course conducted by an authorized Part 121, 135, 141, or 142 provider before taking the ATP multiengine knowledge test. The course requires at least 30 hours of classroom instruction. This includes 8 hours on aerodynamics and high altitude operations, and 2 hours on meteorology and weather detection systems. It also requires 14 hours on air carrier operations, covering physiology, communications, checklist philosophy, operational control, minimum equipment list and configuration deviation list, ground operations, turbine engines, transport category aircraft performance, and automation, navigation, and flight path warning systems. The remaining 6 hours cover leadership, professional development, crew resource management, and safety culture.
You must also complete at least 10 hours of training in a flight simulation training device (FSTD) qualified under 14 CFR Part 60 representing a multiengine turbine airplane. At least 6 hours must take place in a Level C or higher full flight simulator (FFS) representing a multiengine turbine airplane with a maximum takeoff weight of 40,000 pounds or greater. Those 6 hours cover low energy states and stalls, upset recovery techniques, and adverse weather conditions including icing, thunderstorms, and crosswinds with gusts. Up to 4 hours may be completed in a Level 4 or higher FSTD covering navigation, flight management systems, and automation including autoflight.
According to the FAA 2023 Airman Knowledge Test Statistics, candidates took 11,000 Airline Transport Pilot Multiengine Airplane exams in 2023, achieving a 99.71 percent pass rate and an average score of 93.47 percent. In the same 2023 FAA report, 123 candidates took the Airline Transport Pilot Single Engine Airplane (135) exam (96.75 percent pass rate, 88.87 percent average score) and 142 took the Multiengine Airplane Canadian Conversion exam (100.00 percent pass rate, 93.72 percent average score).
Under FAA Notice 8900.225 and 14 CFR 61.39, ATP multiengine knowledge test results taken after completing the ATP CTP are valid for 60 calendar-months (5 years). New-hire pilots in Part 121 operations may use an expired ATP knowledge test if they have completed the ATP CTP and the air carrier's initial training program. If you fail the knowledge test after completing the ATP CTP, you must receive remedial training and an endorsement from an approved ATP CTP provider before retesting.
The ATP practical test evaluates normal and abnormal procedures across eight areas of operation under 14 CFR 61.157(e)(2) for multiengine airplanes: preflight preparation, preflight procedures, takeoffs and landings, in-flight maneuvers, stall prevention, instrument procedures, emergency operations, and postflight procedures. Under 14 CFR 61.157(f), successfully completing a Part 121 proficiency check under 14 CFR 121.441 (or the required competency and instrument proficiency checks under Part 135 or Part 91 Subpart K) before an FAA Aviation Safety Inspector, an authorized Aircrew Program Designee, or an authorized Training Center Evaluator satisfies the flight proficiency requirements for issuing your ATP certificate and concurrent aircraft type rating. Per FAA Order 8900.1 updates in FAA Notice 8900.225, IACRA could not be used initially for an R-ATP application, requiring a paper FAA Form 8710-1.
Special credits, restriction removal, and Part 121 Captain upgrades
Under 14 CFR 61.159(c), a commercial pilot employed by a Part 135 operator may log second-in-command time in operations where a second pilot is not otherwise required, if conducted under an FAA-approved Part 135 Second-in-Command Professional Development Program (SIC PDP) under 14 CFR 135.99. SIC PDP time counts toward total time, cross-country, night, and instrument minimums, but cannot be logged as PIC time. Under 14 CFR 61.159(d), a commercial pilot who has served as a flight engineer in Part 121 operations (while in an approved Part 121 pilot training program) or as a U.S. Armed Forces flight engineer crewmember may credit 1 hour for every 3 hours of flight engineer time toward the 1,500-hour total time requirement, up to 500 hours.
When you rely on night landing substitutions (61.159(b)), Part 135 SIC PDP time (61.159(c)), flight engineer credit (61.159(d)), or R-ATP reduced hours (61.160(a)-(d)), 14 CFR 61.159(e) and 61.160(h) require the FAA to place an ICAO limitation on your certificate reading: Holder does not meet the pilot in command aeronautical experience requirements of ICAO. The FAA removes this limitation once you present satisfactory evidence of meeting the full ICAO and 14 CFR 61.159 requirements.
An FAA R-ATP certificate carries the limitation: Restricted in accordance with 14 CFR 61.167. To upgrade to Captain (PIC) in Part 121 operations under 14 CFR 121.436 and FAA Notice 8900.225, you must hold an unrestricted ATP certificate with an appropriate aircraft type rating, a first-class medical certificate, and at least 1,000 flight hours in qualifying air carrier operations (accumulated as a Part 121 SIC, or as a PIC under 14 CFR 135.243(a)(1) or 14 CFR 91.1053(a)(2)(i), with up to 500 hours credited from multiengine turbine military PIC time in a multi-pilot operation).
Practice example
Walk me through how you qualify for your Restricted Privileges ATP today, including how you met the cross-country, night, and multiengine class minimums, and explain what happens when you upgrade to an unrestricted ATP.
Example answer, written by us. It is not a real applicant's story. I qualify for a Restricted Privileges ATP under 14 CFR 61.160(b) at 1,000 hours of total pilot time because I graduated from an FAA-authorized university with a bachelor's degree in an aviation major, completed 62 semester credit hours of approved aviation coursework, and earned my commercial pilot certificate and instrument rating through our associated Part 141 flight school. I have my official transcript with the university's certifying statement ready for my Form 8710-1 application. For the sub-minimums under 14 CFR 61.159 and 61.160, I have 240 hours of total cross-country time, which exceeds the 200-hour R-ATP requirement, and 115 hours of PIC cross-country time, which exceeds the 100-hour PIC cross-country rule. For the 100-hour night requirement, I logged 82 hours of night flight time plus 38 full-stop night takeoffs and landings, allowing me to credit 18 hours under 14 CFR 61.159(b). I also have 50 hours in multiengine airplanes and completed the 40-hour ATP CTP course and ATM written exam. Once I reach age 23, 1,500 total hours, and 500 cross-country hours, I can present my logbooks to remove the 14 CFR 61.167 restriction without another checkride.
This response cites the exact 14 CFR 61.160 and 61.159 paragraphs, shows the interviewer that the candidate understands the difference between total cross-country (200 hours for R-ATP) and PIC cross-country (100 hours), and accurately explains how the 14 CFR 61.159(b) night landing substitution and restriction removal work.
Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview
Frequently asked questions
How many flight hours do you need to get an ATP license?
Under 14 CFR 61.159, you need at least 1,500 hours of total time as a pilot for a standard unrestricted ATP certificate in the airplane category, or 1,200 hours for a helicopter ATP under 14 CFR 61.161. Under 14 CFR 61.160, eligible applicants can earn a Restricted Privileges ATP (R-ATP) at 750 hours for U.S. military pilots, 1,000 hours for graduates of an authorized 4-year aviation bachelor's degree program (60+ aviation credits), or 1,250 hours for graduates of an authorized 2-year or 4-year aviation degree program (30+ aviation credits).
How old do you have to be to get an ATP license?
Under 14 CFR 61.153, you must be at least 23 years old for an unrestricted ATP certificate and at least 21 years old for a Restricted Privileges ATP (R-ATP) certificate. Under 14 CFR 61.35, you only need to be 18 years old to take the ATP multiengine knowledge test after completing the ATP CTP course.
Do you need 1,500 hours of PIC time for an ATP license?
No. Under 14 CFR 61.159(a)(5), you only need 250 hours of flight time in an airplane as pilot in command (or as second in command performing PIC duties under supervision), which must include 100 hours of cross-country PIC time and 25 hours of night PIC time. The remaining hours toward your 1,500-hour total time requirement can include dual instruction received, solo time, and second-in-command time.
What is the ATP CTP course and when is it required?
The Airline Transport Pilot Certification Training Program (ATP CTP) under 14 CFR 61.156 is a mandatory prerequisite before taking the FAA knowledge test for an ATP certificate with a multiengine class rating or concurrent multiengine airplane type rating. It consists of at least 30 hours of classroom instruction and at least 10 hours of training in a multiengine turbine flight simulation training device (including at least 6 hours in a Level C or higher full flight simulator rated at 40,000 pounds or greater maximum takeoff weight).
What medical certificate is required for an ATP license in Part 121 operations?
Under 14 CFR 61.23 and 14 CFR 121.436, exercising PIC privileges of an ATP certificate (or serving as SIC in flag or supplemental operations requiring three or more pilots) requires a first-class medical certificate. Serving as SIC (first officer) in standard two-pilot Part 121 operations requires at least a second-class medical certificate.
How long is the FAA ATP written knowledge test valid?
Under FAA Notice 8900.225 and 14 CFR 61.39, ATP multiengine knowledge test results taken after completing the ATP CTP are valid for 60 calendar-months (5 years). New-hire pilots in Part 121 air carrier operations may also use an expired ATP knowledge test if they have completed the ATP CTP and the operator's approved initial training program.
Sources
- eCFR: 14 CFR Part 61 Subpart G, Airline Transport Pilots
- FAA Notice N 8900.225: Pilot Certification and Qualification Requirements for Air Carrier Operations
- Federal Register: Pilot Certification and Qualification Requirements for Air Carrier Operations Final Rule (78 FR 42324)
- FAA 2023 Airman Knowledge Test Annual Statistics
- ecfr.gov
- ecfr.gov
- ecfr.gov
- ecfr.gov