How to Get an ATP Certificate

Short answer: To get an unrestricted Airline Transport Pilot (ATP) certificate for airplanes, you must be at least 23 years old, hold a Commercial Pilot Certificate with an instrument rating, and log at least 1,500 hours of total flight time under 14 CFR 61.159. If you are applying for a multiengine rating, you must first complete the 40-hour ATP Certification Training Program (ATP CTP) under 14 CFR 61.156, pass the FAA knowledge test, and pass the practical test. Pilots at least 21 years old who meet military or qualifying aviation degree criteria can apply for a Restricted Privileges ATP (R-ATP) with as few as 750 to 1,250 total flight hours under 14 CFR 61.160.

Step 1: Meet General Eligibility and Medical Requirements

Every pilot serving in 14 CFR Part 121 air carrier operations must hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the airplane flown. Before you begin testing for the certificate, you must meet the baseline eligibility rules set by the Federal Aviation Administration in 14 CFR 61.153, as updated through November 9, 2026.

For an unrestricted ATP certificate under 14 CFR 61.159, you must be at least 23 years old. If you are applying for a Restricted Privileges ATP (R-ATP) certificate under 14 CFR 61.160, the minimum age drops to 21 years old. All applicants must be of good moral character and be able to read, speak, write, and understand the English language.

Your medical certificate requirement depends on the seat you occupy in air carrier service. Under the 2013 Final Rule (78 FR 42324) and 14 CFR 61.23, you must hold a first-class medical certificate to exercise Pilot in Command (PIC) privileges in Part 121 operations, or to serve as Second in Command (SIC) in Part 121 flag or supplemental operations requiring three or more pilots. If you serve as an SIC in standard two-pilot Part 121 operations, you are required to hold at least a second-class medical certificate.

  • Hold an FAA Commercial Pilot Certificate with an instrument rating issued under 14 CFR Part 61.
  • Alternatively, meet the military experience requirements under 14 CFR 61.73 to qualify for a commercial pilot certificate and an instrument rating as a rated U.S. military pilot or former rated military pilot.
  • Alternatively, hold a foreign ATP license with instrument privileges or a foreign commercial pilot license with an instrument rating issued without geographical limitations by an International Civil Aviation Organization (ICAO) contracting State.

Step 2: Log the Required Flight Hours (Unrestricted vs. R-ATP)

To qualify for an unrestricted airplane ATP certificate under 14 CFR 61.159, you need 1,500 hours of total time as a pilot, along with specific subcategory minimums for cross-country, night, instrument, class, and PIC time. Every hour must be verified in your logbook before you take the practical test.

Under 14 CFR 61.160, four groups of pilots can apply for a multiengine R-ATP at age 21 with reduced total hours or reduced cross-country time. Regardless of which R-ATP track you use, 14 CFR 61.160(e) and (f) reduce the cross-country requirement from 500 hours to 200 hours, while keeping the standard night, instrument, PIC, and 50-hour multiengine class minimums unchanged.

To use the collegiate R-ATP pathways under 14 CFR 61.160(b) or (c), your degree must come from an accredited institution of higher education holding an FAA Letter of Authorization under 14 CFR 61.169. You must also complete your commercial and instrument ground training inside an approved Part 141 curriculum at that school, and complete your flight training in that school's Part 141 curriculum or at a Part 141 pilot school with a formal training agreement under 14 CFR 141.26.

FAA Airplane ATP and R-ATP Aeronautical Experience Minimums (14 CFR 61.159 and 61.160)

Pathway Min Age Total Time Cross-Country Night Instrument Airplane PIC In Class
Unrestricted ATP (61.159) 23 1,500 hrs 500 hrs 100 hrs 75 hrs 250 hrs 50 hrs
R-ATP: U.S. Military Pilot (61.160(a)) 21 750 hrs 200 hrs 100 hrs 75 hrs 250 hrs 50 hrs
R-ATP: Bachelor's Degree, 60+ Aviation Credits (61.160(b)) 21 1,000 hrs 200 hrs 100 hrs 75 hrs 250 hrs 50 hrs
R-ATP: Associate's or Bachelor's, 30-59 Credits (61.160(c)-(d)) 21 1,250 hrs 200 hrs 100 hrs 75 hrs 250 hrs 50 hrs
R-ATP: Age 21 with Full Total Hours (61.160(f)) 21 1,500 hrs 200 hrs 100 hrs 75 hrs 250 hrs 50 hrs

Simulator Credits and Special Logbook Rules Under 14 CFR 61.159

Miscounting simulator credits or overlooking subcategory rules inside 14 CFR 61.159 can delay your checkride. Your 250 hours of airplane PIC time (which can include time as an SIC performing PIC duties under supervision, or horizontal flight time in a powered-lift aircraft for qualifying military pilots) must specifically include at least 100 hours of cross-country time and 25 hours of night flight time.

If you are short on night hours, 14 CFR 61.159(b) provides a night landing credit. Once you have logged at least 20 night takeoffs and landings to a full stop, you can substitute each additional night takeoff and landing to a full stop for 1 hour of night flight time, up to a maximum credit of 25 hours toward the 100-hour night requirement.

Be aware that using certain credits adds an international restriction to your certificate. Under 14 CFR 61.159(e) and 61.160(h), applicants who use the night landing substitution, Part 135 SIC professional development time, flight engineer credits, or reduced R-ATP total hours receive a certificate bearing the limitation: Holder does not meet the pilot in command aeronautical experience requirements of ICAO. You can remove this limitation once you present satisfactory evidence of meeting standard 14 CFR 61.159 and ICAO requirements.

  • Total time simulator cap: Up to 100 hours of total aeronautical experience may be obtained in a Full Flight Simulator (FFS) or Flight Training Device (FTD) representing an airplane if completed in an approved Part 121, 135, 141, or 142 course (14 CFR 61.159(a)(6)).
  • Multiengine class simulator cap: Up to 25 hours of the required 50 hours in the class of airplane may be credited from training in an FFS representing that class inside an approved Part 121, 135, 141, or 142 course. An FTD or Aviation Training Device (ATD) cannot be used for this credit (14 CFR 61.159(a)(3)).
  • Instrument simulator cap: Up to 25 hours of simulated instrument time may be credited in an airplane FFS or FTD, increasing to a maximum of 50 hours if completed in a course conducted by a Part 142 certificated training center (14 CFR 61.159(a)(4)).
  • Flight engineer credit: Qualifying U.S. Armed Forces or Part 121 flight engineers participating in an approved pilot or crewmember training program may credit 1 hour for every 3 hours of flight engineer time toward total pilot time, up to 500 hours (14 CFR 61.159(d)).

Worked Example: Auditing Your Logbook for 14 CFR 61.159 Deficits

Before scheduling your practical test, audit your logbook against each sub-requirement of 14 CFR 61.159 rather than looking only at total time. Below is a worked example created by our team to show how simulator caps and night landing credits apply to a civilian pilot applying for an unrestricted multiengine ATP at age 23.

Suppose you have logged 1,460 hours in airplanes and 60 hours in an approved Part 141 FTD, giving you 1,520 total hours. Because 60 hours is under the 100-hour simulator limit in 14 CFR 61.159(a)(6), your total time qualifies. Next, check your multiengine class time. Suppose you have 30 hours in a twin-engine airplane and 20 hours in a multiengine FTD. Because 14 CFR 61.159(a)(3) only allows Full Flight Simulator (FFS) time, not FTD time, to count toward the 50-hour class requirement, those 20 FTD hours do not count toward class time. You still need 20 hours in a multiengine airplane or an approved multiengine FFS.

Finally, check your night time. Suppose you have 82 hours of night flight time and 42 full-stop night takeoffs and landings. Under 14 CFR 61.159(b), every full-stop night landing beyond your first 20 counts as 1 hour of night time, up to 25 hours. Your 22 extra landings give you 22 hours of night credit, bringing your credited night total to 104 hours and satisfying the 100-hour minimum.

Step 3: Complete the ATP Certification Training Program

If you are applying for an ATP certificate with an airplane category multiengine class rating, or an ATP certificate issued concurrently with a multiengine airplane type rating, 14 CFR 61.153(e) and 61.156 require you to complete an FAA-approved ATP Certification Training Program before you can apply for the FAA knowledge test. Single-engine airplane, rotorcraft, and powered-lift ATP ratings do not require the course.

Only certificate holders authorized under 14 CFR Part 121, 135, 141, or 142 can conduct the course. Furthermore, every course instructor must hold an ATP certificate with an airplane multiengine class rating, have at least two years of air carrier operational experience, and, if teaching in a simulator, hold an appropriate airplane type rating for the aircraft that simulator represents.

Under 14 CFR 61.156, the course requires at least 40 total instructional hours, including 30 hours of classroom academics and 10 hours of simulator training. To graduate and receive your graduation certificate under AC 61-138 paragraph 13 and 16, you must answer at least 30 academic test questions (with at least 15 given at the end of the course) and achieve a minimum passing score of 70 percent on each written exam administered.

Mandatory Certification Training Program Curriculum Breakdown (14 CFR 61.156)

Training Phase Minimum Hours Required Topics and Device Standards
Academic: Aerodynamics 8 hours High altitude operations, Mach/airspeed relationships, swept-wing flight characteristics, stall and upset prevention and recovery.
Academic: Meteorology 2 hours Adverse weather phenomena, airborne weather radar, windshear detection, icing, ground de-icing holdover tables, low-visibility operations.
Academic: Air Carrier Operations 14 hours High-altitude physiology, sterile flight deck, checklist philosophy, operational control, MEL/CDL, ground operations, turbine engines, transport performance, automation and navigation.
Academic: Leadership and CRM 6 hours PIC authority and responsibility, crew resource management, safety culture, mentoring, professional development.
Simulator: Level C or Higher FFS 6 hours Must represent a multiengine turbine airplane with a maximum takeoff weight of 40,000 pounds or greater (unless granted FAA deviation). Covers low energy states, stalls, upset recovery, icing, thunderstorms, and gusty crosswinds.
Simulator: Level 4 or Higher FTD Up to 4 hours Remaining FSTD time (to reach 10 total FSTD hours) covering navigation, flight management systems (FMS), and automation/autoflight.

Step 4: Pass the FAA ATP Knowledge Test

Once you finish the course, the training provider issues a numbered graduation certificate containing both your pilot certificate details and the provider's FAA certificate number. Under 14 CFR 61.156, you must present this graduation certificate when applying to take the multiengine ATP knowledge test.

Under 14 CFR 61.155(c), the knowledge test evaluates 14 core aeronautical knowledge areas, including Federal Aviation Regulations for ATP privileges, weather chart interpretation, windshear and microburst avoidance, IMC air navigation, air traffic control procedures, weight and balance, high-altitude aerodynamics, human factors, aeronautical decision-making, crew resource management, and all required certification training coursework. If you do not pass the knowledge test, you must follow the retesting and remedial training provisions of 14 CFR 61.49.

Note that if you already hold an ATP certificate with the appropriate aircraft category and class rating and are applying to add an additional aircraft type rating, 14 CFR 61.155(b) states that you are not required to pass another knowledge test.

Step 5: Pass the Practical Test and Remove R-ATP Limitations

The final step is passing the practical test under 14 CFR 61.157. You will submit your application and verify your credentials using the FAA Integrated Airman Certification and Rating Application (IACRA) web portal (or paper FAA Form 8710-1), which validates your data, captures electronic signatures, and issues your temporary airman certificate without requiring a physical signature from the certifying officer.

For an airplane multiengine or single-engine rating, 14 CFR 61.157(e) requires the practical test to cover eight areas of operation: preflight preparation, preflight procedures, takeoffs and landings, in-flight maneuvers, stall prevention, instrument procedures, emergency operations, and postflight procedures. You can complete the ATP practical test concurrently with an aircraft type rating as an employee of a Part 121 or Part 135 operator. Under 14 CFR 61.157(c) and (f), you satisfy the training endorsement and flight proficiency requirements by presenting a training record showing completion of the carrier's approved training program. You must then pass a Part 121.441 proficiency check, or Part 135 or 91K competency and instrument proficiency checks, with an FAA Aviation Safety Inspector, Aircrew Program Designee, or authorized Training Center Evaluator.

If you earn a Restricted Privileges ATP under 14 CFR 61.160, your certificate will display the limitation: Restricted in accordance with 14 CFR 61.167. Under 14 CFR 61.167(b), you cannot act as PIC in Part 121, Part 91.1053(a)(2)(i), or Part 135.243(a)(1) operations, nor serve as SIC in Part 121 flag or supplemental operations requiring three or more pilots. Once you reach age 23 and accumulate the full aeronautical experience required by 14 CFR 61.159, you are entitled under 14 CFR 61.160(g) to have the R-ATP restriction removed upon presenting satisfactory evidence of your age and hours.

  • Test-day document checklist: Government photo ID, Commercial Pilot Certificate with instrument rating, current FAA Medical Certificate, course graduation certificate, passing ATP knowledge test report, audited logbooks, and IACRA application.
  • Additional R-ATP documents: Official Form DD-214 or active-duty service record plus undergraduate pilot training graduation record for military applicants (14 CFR 61.160(a)), or official college transcripts and the institution's certifying statement for degree applicants (14 CFR 61.160(b)-(c)).
  • Upgrading Part 121 SIC to PIC: Under the 2013 Final Rule (14 CFR 121.436), serving as a Part 121 PIC requires not only an unrestricted ATP certificate and first-class medical, but also at least 1,000 flight hours in air carrier operations (as a Part 121 SIC, or as PIC under 14 CFR 135.243(a)(1) or 91.1053(a)(2)(i)).

Other ATP Categories and Foreign License Conversions

If you are applying for a non-airplane ATP certificate, Subpart G provides separate hour requirements. Under 14 CFR 61.161, a rotorcraft category and helicopter class ATP requires at least 1,200 hours of total pilot time, including 500 hours of cross-country time, 100 hours of night time (with at least 15 hours in helicopters), 200 hours in helicopters (with at least 75 hours as PIC or supervised SIC), and 75 hours of instrument time (at least 50 in flight and 25 in helicopters as PIC or supervised SIC). Under 14 CFR 61.163, a powered-lift category ATP requires 1,500 hours of total pilot time, 500 hours of cross-country time, 100 hours of night time, 75 hours of instrument time, and 250 hours in a powered-lift as PIC or supervised SIC (including 100 hours cross-country and 25 hours night).

Pilots transferring credentials across borders can use bilateral pathways. Under 14 CFR 61.153(d)(3), the FAA accepts a valid, geographically unrestricted foreign ATP or commercial/instrument license from an ICAO contracting State as the prerequisite certificate to enter the FAA ATP testing pipeline. Conversely, Transport Canada allows FAA certificate holders to convert a U.S. license to a Canadian Airline Transport Pilot Licence under the Implementation Procedures for Licensing Agreement. You can also apply through CARs Standard 421.34 and 421.35, which carries a 40-working-day processing service standard. This route requires a Category 1 medical certificate, logbook verification, written exams SAMRA, SARON, and INRAT for airplanes, and a multiengine IFR flight test in an airplane or Level C or D simulator.

Practice example

During your ATP oral exam or technical interview, the examiner asks: Why do operating margins narrow at high altitude and heavy weight in a transport category airplane, and how does bank angle affect your stall margin and recovery?

Example answer, written by us. It is not a real applicant's story. As a transport category airplane climbs toward its maximum operating altitude at a high weight, true airspeed increases for a given indicated airspeed while the local speed of sound decreases with colder temperatures. This causes the low-speed stall angle of attack boundary and the high-speed maximum operating Mach limit, MMO, to converge, creating a very narrow speed envelope. If we increase our bank angle at high altitude, the load factor increases, which raises the stall speed and shrinks that operating margin even further. Turbulence can also push the airplane past either limit. If we enter a low-energy state or an impending stall at high altitude, thrust available is significantly lower than at low altitude. Because of that, my first action in any approach-to-stall or full stall is a smooth, positive reduction in angle of attack to regain lift, accepting the necessary altitude loss while avoiding oscillatory control inputs that could cause a secondary stall.

This answer connects every core high-altitude aerodynamic concept required by 14 CFR 61.156(a)(1) and AC 61-138 paragraph 12(a): the convergence of MMO and stall angle of attack, the effect of bank angle and G-loading on operating margins, reduced thrust available at altitude, and reducing angle of attack as the primary stall recovery action.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

Can I take the FAA ATP knowledge test before finishing the ATP CTP?

No. Under 14 CFR 61.153(e) and 61.156, you must complete the certification training program and present your official graduation certificate when you apply to take the multiengine ATP knowledge test.

What flight hours qualify a pilot for a Restricted ATP (R-ATP) certificate?

Under 14 CFR 61.160, pilots at least 21 years old with 200 hours of cross-country time can qualify with 750 total hours as a U.S. military-trained pilot, 1,000 total hours with an authorized aviation bachelor's degree (60+ aviation credits), 1,250 total hours with an authorized aviation associate's or bachelor's degree (59-59 aviation credits), or 1,500 total hours.

How many hours of multiengine time are needed for an ATP certificate?

Under 14 CFR 61.159(a)(3), you must have at least 50 hours of flight time in the class of airplane for the rating sought. You may credit up to 25 hours of training in a Full Flight Simulator representing a multiengine airplane toward that 50-hour requirement if completed in an approved Part 121, 135, 141, or 142 training course.

Do I need a first-class medical certificate to fly with an ATP?

Under the 2013 Final Rule (78 FR 42324) and 14 CFR 61.23, you must hold a first-class medical certificate to exercise PIC privileges of an ATP certificate or to serve as SIC in Part 121 flag or supplemental operations requiring three or more pilots. To serve as SIC in standard two-pilot Part 121 operations, you must hold at least a second-class medical certificate.

Can night landings substitute for night flight hours on an ATP application?

Yes. Under 14 CFR 61.159(b), once you have logged at least 20 night takeoffs and landings to a full stop, you can count each additional night takeoff and landing to a full stop as 1 hour of night flight time, up to a maximum credit of 25 hours toward the 100-hour night requirement.

Sources