Kalitta Airline: Cargo Operations, Special Permits, and Part 121 Pilot Qualifications
Short answer: Searches for Kalitta airline or Kalitta airlines refer to Kalitta Air, LLC, a cargo carrier based in Ypsilanti, Michigan, that operates Boeing 777-F freighters and holds federal special permits for cargo-only hazardous materials transport. Pilots flying for a 14 CFR Part 121 air carrier must hold an Airline Transport Pilot certificate with an appropriate aircraft type rating to serve as second in command, and must log 1,000 qualifying flight hours under 14 CFR 121.436 to serve as pilot in command.
Kalitta Air, LLC Overview and Ypsilanti Base
When pilots and shippers search for Kalitta airline or Kalitta airlines, they are looking for the carrier officially registered in federal aviation records as Kalitta Air, LLC. According to a July 23, 2024 Federal Aviation Administration enforcement release, Kalitta Air, LLC is based in Ypsilanti, Michigan.
In federal regulatory filings, Kalitta Air, LLC is documented as an operator of cargo-only aircraft. Pipeline and Hazardous Materials Safety Administration notices in the Federal Register identify the company under Mode 4, which designates cargo aircraft only transportation. If you are researching the carrier as a prospective pilot or logistics specialist, understanding its federal regulatory footprint gives you a clear picture of how heavy air cargo carriers operate under United States Department of Transportation oversight.
- Legal Entity Name: Kalitta Air, LLC
- Base Location: Ypsilanti, Michigan
- Documented Aircraft in FAA Records: Boeing 777-F
- Primary DOT Transport Mode in Special Permits: Mode 4 (Cargo aircraft only)
Boeing 777-F Operations and Airworthiness Directive Compliance
Federal Aviation Administration records confirm that Kalitta Air, LLC operates the Boeing 777-F freighter. On July 23, 2024, the FAA announced a proposed $400,000 civil penalty against Kalitta Air, LLC (faa.gov, as of July 2024) for allegedly operating a Boeing 777-F that was not in compliance with an FAA-issued Airworthiness Directive. According to the agency, the carrier flew the Boeing 777-F on 44 flights between December 29, 2022, and January 26, 2023, without updating the Aircraft Flight Manual to comply with the directive. Kalitta Air, LLC requested an informal conference in response to the notice.
For an air carrier pilot, this enforcement action highlights why aircraft flight manual and airworthiness directive compliance is a core subject during technical interviews.
When you prepare for a technical interview at a heavy cargo operator, expect scenario questions about discovering an outdated manual revision or an open maintenance item prior to pushback. Focus your practice on explaining how you use official company channels to resolve documentation discrepancies before accepting an aircraft.
Hazardous Materials and PHMSA Special Permits
Cargo-only airlines frequently transport freight that is forbidden on passenger-carrying aircraft or requires specific exemptions from standard Hazardous Materials Regulations. The Pipeline and Hazardous Materials Safety Administration issues special permits under 49 U.S.C. 5117(b) and 49 CFR 1.53(b) to authorize these movements. Federal Register notices document two distinct special permits granted to Kalitta Air, LLC for specialized cargo transport.
First, on April 8, 2020 (85 FR 19795), PHMSA published notice that it granted Special Permit 20951-N to Kalitta Air, LLC. This permit affected 49 CFR 172.101(j), 172.203(a), 172.301(c), 173.27(b)(2), and 175.30(a)(1), authorizing the transportation in commerce of explosives that are otherwise forbidden for air transportation by cargo-only aircraft.
Second, on February 2, 2026 (91 FR 4787), PHMSA published notice of Application 22184-N from Kalitta Air, LLC to transport UN3538 articles containing non-flammable, non-toxic gas, not otherwise specified, under Mode 4 (cargo aircraft only). On July 14, 2026 (91 FR 43147), PHMSA granted Special Permit 22184-N to Kalitta Air, LLC, affecting 49 CFR 172.203(a), 172.301(c), 173.27(b)(2), and 175.30(a)(1). The granted permit specifically authorizes the air transport of Magnetic Resonance Imaging (MRI) equipment classified as UN3538 via cargo-only aircraft.
PHMSA Special Permits Granted to Kalitta Air, LLC (federalregister.gov, as of July 2026)
| Permit Number | Federal Register Date | Regulations Affected (49 CFR) | Authorized Cargo and Mode |
|---|---|---|---|
| 20951-N | April 8, 2020 (85 FR 19795) | 172.101(j), 172.203(a), 172.301(c), 173.27(b)(2), 175.30(a)(1) | Transportation in commerce of explosives forbidden for air transportation by cargo-only aircraft |
| 22184-N | July 14, 2026 (91 FR 43147) | 172.203(a), 172.301(c), 173.27(b)(2), 175.30(a)(1) | Transportation by cargo-only aircraft of Magnetic Resonance Imaging (MRI) equipment as UN3538 articles containing non-flammable, non-toxic gas, n.o.s. |
14 CFR Part 121 Pilot Certificate and Experience Requirements
If your goal is to fly for a Part 121 air carrier, your baseline qualifications are governed by 14 CFR Part 121 Subpart O (up to date as of November 9, 2026). Specifically, 14 CFR 121.436 establishes the mandatory certificate and flight time requirements for both second in command (First Officer) and pilot in command (Captain) positions.
Under 14 CFR 121.436(b), no certificate holder may use a pilot as second in command unless that pilot holds an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the aircraft being flown. A second-in-command type rating obtained under 14 CFR 61.55 does not satisfy Part 121 requirements. Furthermore, under 14 CFR 121.432(a), a pilot serving as second in command in an operation that requires three or more pilots (such as long-range flag or supplemental flights) must be fully qualified to act as pilot in command of that operation, except during operating experience under 121.434 and specific mentoring ground training.
To act as pilot in command in Part 121 operations (or as second in command in a flag or supplemental operation requiring three or more pilots), 14 CFR 121.436(a) requires an ATP certificate not subject to the restricted privileges limitations of 14 CFR 61.167, an appropriate aircraft type rating, and at least 1,000 hours of qualifying flight time. Under 14 CFR 121.436(c), you may credit up to 500 hours of military flight time toward the 1,000-hour requirement if you logged it as pilot in command in a multiengine, turbine-powered, fixed-wing airplane or powered-lift aircraft in an operation requiring more than one pilot. Pilots may also credit Part 121 pilot-in-command time logged prior to July 31, 2013, and pilots who were already employed as Part 121 pilots in command on July 31, 2013, are exempt from the 1,000-hour rule under 121.436(e).
Under 14 CFR 121.436(a)(3), the 1,000 hours of qualifying flight time must be accrued in:
- Second in command in Part 121 operations (14 CFR 121.436(a)(3)(i))
- Pilot in command in fractional ownership operations under 14 CFR 91.1053(a)(2)(i)
- Pilot in command in commuter or on-demand operations under 14 CFR 135.243(a)(1)
- Pilot in command in eligible on-demand operations satisfying 14 CFR 135.4(a)(2)(ii)(A)
- Any combination of these qualifying categories
ATP Certification Training Program (ATP CTP) and R-ATP Pathways
Before you can earn an unrestricted multiengine ATP certificate or an ATP certificate issued concurrently with an airplane type rating, you must complete the Airline Transport Pilot Certification Training Program (ATP CTP). According to the FAA Pilot Training portal (updated June 8, 2026), the ATP CTP prepares applicants to operate safely in operations that require an ATP certificate by rule. The program is governed by Advisory Circular 61-138, and applicants apply for certification and ratings using FAA Form 8710-1.
For pilots building time toward Part 121 minimums, the FAA also authorizes institutions of higher education to certify graduates of specific aviation degree programs for a restricted privileges ATP (R-ATP) certificate with reduced aeronautical experience under Advisory Circular 61-139 and FAA Form 8700-1. The FAA notes that this authority is distinct from the ATP CTP and allows eligible pilots with fewer than 1,500 hours of flight time to obtain an R-ATP certificate. An R-ATP certificate permits a pilot to serve as a co-pilot (second in command) until obtaining the 1,500 hours needed to remove the restriction, provided the operation does not require three or more pilots under 14 CFR 121.436(a).
Operations Familiarization, Operating Experience, and Consolidation
Once hired by a Part 121 carrier, a pilot must complete a structured sequence of training and line flying under 14 CFR Part 121 Subpart O before serving as a fully consolidated crewmember. For pilots who began basic indoctrination ground training on or after April 27, 2022, 14 CFR 121.435 requires operations familiarization before beginning operating experience. During operations familiarization, the newly hired pilot must occupy the flight deck observer seat using an operational headset for at least two operating cycles (each consisting of a takeoff, climb, enroute portion, descent, and landing).
Next, under 14 CFR 121.434, pilots must complete Initial Operating Experience (OE) inflight after finishing ground and flight training. If a pilot completed the preflight visual inspection by pictorial means during a proficiency check, the pilot must demonstrate at least one complete preflight visual inspection of the interior and exterior of a static airplane to a check pilot before finishing OE. For Group II airplanes (which include turbojet-powered transport aircraft), initial training requires 25 hours of operating experience. Transition training in Group II airplanes requires 25 hours for a pilot in command and 15 hours for a second in command. Both require at least 4 operating cycles, with at least 2 cycles flown as the pilot flying. While 121.434(f) allows some crewmembers to reduce required OE hours by up to 50 percent by substituting one additional takeoff and landing per hour, this reduction is explicitly prohibited for Group II initial training and Group II second-in-command transition training.
Following operating experience, flight crewmembers operating under Part 121 must log at least 100 hours of line operating flight time to consolidate knowledge and skills within 120 days under 14 CFR 121.434(g). This consolidation window begins after completing the practical test or proficiency check. If a pilot cannot complete the 100 hours within 120 days, 14 CFR 121.434(h)(4) allows the carrier to extend the period to no more than 150 days, provided the pilot completes refresher training or a supervised line observation flight with a check pilot on or before day 120.
14 CFR 121.434 Operating Experience (OE) Hours and Cycles by Airplane Group (ecfr.gov, as of November 2026)
| Training Category and Position | Group I Reciprocating | Group I Turbopropeller | Group II Airplanes | Minimum Operating Cycles |
|---|---|---|---|---|
| Initial Training (All Pilots) | 15 hours | 20 hours | 25 hours | 4 cycles (at least 2 as pilot flying) |
| Transition Training (Pilot in Command) | 10 hours | 12 hours | 25 hours | 4 cycles (at least 2 as pilot flying) |
| Transition Training (Second in Command) | 10 hours | 12 hours | 15 hours | 4 cycles (at least 2 as pilot flying) |
| Flight Engineer | 8 hours | 10 hours | 12 hours | Not specified in 121.434(d) |
Pilot Pairing Limitations, Recency, and Checking Intervals
Even after completing initial operating experience, 14 CFR 121.438 places strict operating and pairing limits on newly qualified crewmembers. Under 121.438(b), no flight may operate unless either the pilot in command or the second in command has at least 75 hours of line operating flight time in that airplane type. Furthermore, under 121.438(a), if the second in command has fewer than 100 hours as second in command in that airplane type under Part 121, and the pilot in command is not a qualified check pilot, the pilot in command must perform all takeoffs and landings at special airports or under specific adverse weather and runway conditions.
To stay current on the line, every required pilot must complete at least 3 takeoffs and landings in the airplane type (or an approved Level B or higher Full Flight Simulator) within the preceding 90 days under 14 CFR 121.439. If 90-day recency lapses, the pilot must re-establish it under a check pilot's supervision by performing 3 takeoffs and landings that include one simulated failure of the most critical powerplant, one landing from an ILS approach to the carrier's lowest authorized ILS minimum, and one full-stop landing.
Long-term qualification is maintained through recurrent training, proficiency checks, and line checks. Under 14 CFR 121.433 and 121.441, a pilot in command must complete a proficiency check every 12 calendar months and either a proficiency check or an approved simulator training course within the preceding 6 calendar months. Second-in-command pilots must complete a proficiency check or line-oriented flight training every 24 calendar months, and a proficiency check or simulator course every 12 calendar months. Additionally, 14 CFR 121.440 requires every pilot in command to pass a line check every 12 calendar months. For supplemental operations, the line check must be given by a check pilot qualified on the airplane over a part of a Federal airway, foreign airway, or advisory route. Finally, under 14 CFR 121.445, flying as pilot in command into a designated special airport requires either an entry (with takeoff and landing) by the pilot in command or second in command or pictorial qualification by the pilot in command within the preceding 12 calendar months, unless the airport ceiling is at least 1,000 feet above the lowest MEA, MOCA, or initial approach altitude and visibility is at least 3 miles.
Under 14 CFR 121.438(a), the specific adverse weather and runway conditions that require the pilot in command to perform all takeoffs and landings when the second in command has fewer than 100 hours in type are:
- Prevailing visibility at or below 3/4 mile
- Runway Visual Range (RVR) at or below 4,000 feet
- Runway contaminated with water, snow, slush, or similar conditions affecting performance
- Reported braking action less than good
- Crosswind component in excess of 15 knots
- Windshear reported in the vicinity of the airport
- Any other condition where the pilot in command determines it is prudent to exercise command prerogative
Checklist: Preparing for a Heavy Cargo Part 121 Pilot Interview
Use this step-by-step verification checklist written by our team to audit your logbooks and regulatory knowledge before interviewing with a Part 121 cargo carrier.
Going through each regulatory requirement ahead of time ensures your flight time totals are cleanly documented and your technical answers align with 14 CFR Part 121 Subpart O.
- Verify your ATP certificate and type ratings: Confirm your multiengine ATP certificate is issued and, if you are applying for a captain slot or a 3-pilot flag/supplemental relief crew role, ensure any 14 CFR 61.167 R-ATP limitations have been removed.
- Audit your 1,000-hour Part 121 PIC ledger: If targeting a captain upgrade or direct-entry role, separate your logbook columns to show exact hours in 121 SIC, 91.1053(a)(2)(i) PIC, 135.243(a)(1) PIC, and eligible 135.4(a)(2)(ii)(A) PIC, plus up to 500 hours of multiengine turbine multi-pilot military PIC time.
- Review Airworthiness Directive and manual compliance procedures: Prepare a concrete story demonstrating how you verify Aircraft Flight Manual revisions, MEL deferrals, and AD compliance before flight release.
- Study hazardous materials and special permit rules: Review how PHMSA special permits affect 49 CFR 175.30(a)(1) for cargo-only authorizations, including the air transport of UN3538 articles and forbidden explosives.
- Memorize 14 CFR 121.438 pairing limitations: Be ready to recite the exact weather thresholds (3/4 mile visibility, 4,000 RVR, 15-knot crosswind, braking action less than good) that require the PIC to make the takeoff and landing when the SIC has under 100 hours in type.
- Check your 90-day takeoff and landing currency: Ensure you have logged 3 takeoffs and landings in the last 90 days or can explain the exact 3-maneuver simulator profile required under 14 CFR 121.439(b) to regain recency.
How to Practice Technical and Scenario Questions
When preparing for a heavy cargo interview, practice applying federal regulations under time pressure when operating far from a main maintenance base. Instead of memorizing scripted responses, practice speaking through real operational scenarios out loud using your own cockpit experience. Focus on how you verify documentation, how you apply Part 121 weather and pairing limitations, and how you communicate with dispatch and maintenance control when a discrepancy arises.
Practice example
You are the Captain on a Part 121 freighter flight, and your First Officer is newly typed with 60 hours of line operating time in the aircraft. At your destination, the latest weather report shows an 18-knot crosswind and braking action reported as medium. Who must perform the landing, and what regulation governs your decision?
Example answer, written by us. It is not a real applicant's story. Because my First Officer has fewer than 100 hours of Part 121 line operating flight time in the airplane type and I am a line Captain rather than a check pilot, I must perform the landing myself. Under 14 CFR 121.438(a), the pilot in command is required to make all takeoffs and landings whenever the second in command has under 100 hours in type and any listed adverse condition exists. Here, two separate regulatory triggers are met: the crosswind component exceeds 15 knots, and the reported braking action is less than good. I would brief my First Officer clearly before descent so we both understand the role swap, assign the First Officer the pilot monitoring duties for the approach and landing, and review our go-around criteria and rollout deceleration plan together.
This answer cites the exact regulation (14 CFR 121.438(a)) and identifies both triggers in the scenario: the 15-knot crosswind limit and braking action reported as less than good. It also demonstrates good crew resource management by explaining how the Captain briefs the role change ahead of time.
Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview
Frequently asked questions
What is the official legal name and base location of Kalitta airline?
In Federal Aviation Administration enforcement records, the carrier is identified as Kalitta Air, LLC. According to the FAA, Kalitta Air, LLC is based in Ypsilanti, Michigan.
What aircraft type is documented in FAA records for Kalitta Air, LLC?
A July 23, 2024 FAA press release documents Kalitta Air, LLC operating a Boeing 777-F freighter aircraft on 44 flights between December 29, 2022, and January 26, 2023.
What hazardous materials special permits has Kalitta Air, LLC received from PHMSA?
Federal Register notices show PHMSA granted Kalitta Air, LLC Special Permit 20951-N in April 2020 for cargo-only air transport of certain forbidden explosives, and Special Permit 22184-N in July 2026 for cargo-only air transport of Magnetic Resonance Imaging (MRI) equipment classified as UN3538.
What certificates are required to fly as a First Officer for a Part 121 airline?
Under 14 CFR 121.436(b), a pilot acting as second in command in Part 121 operations must hold an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the aircraft being flown. Additionally, under 14 CFR 121.432(a) and 121.436(a), a second in command in a flag or supplemental operation requiring three or more pilots must meet full pilot-in-command qualifications.
How many hours are required to upgrade to Captain under 14 CFR 121.436?
Under 14 CFR 121.436(a)(3), a pilot in command in Part 121 operations must have at least 1,000 hours accrued as a Part 121 second in command, or as a pilot in command in qualifying Part 91K or Part 135 operations. Up to 500 hours of qualifying multi-pilot military turbine multiengine pilot-in-command time may be credited toward the 1,000 hours.
What is the 100-hour consolidation rule for Part 121 pilots?
Under 14 CFR 121.434(g), newly qualified pilots in command and seconds in command must acquire at least 100 hours of line operating flight time within 120 days of completing their type rating practical test or proficiency check. The carrier may extend this window to at most 150 days if the pilot completes refresher training or a supervised check pilot observation flight on or before day 120.
Sources
- FAA Proposes Civil Penalty Against Kalitta Air, LLC
- 14 CFR 121.436 Pilot Qualification: Certificates and Experience Requirements
- 14 CFR Part 121 Subpart O: Crewmember Qualifications
- FAA Pilot Training and ATP Certification Training Program (ATP CTP)
- PHMSA Notice of Actions on Special Permits (2026-14156)
- PHMSA Notice of Applications for New Special Permits (2026-02087)
- PHMSA Notice of Actions on Special Permits (2020-07370)