Mesa Airlines Pilot Development Program, Requirements & Interview Prep
Short answer: Mesa Airlines helps pilots reach the 1,500-hour Airline Transport Pilot (ATP) minimum through its time-building partnership with Bridge Air, offering over 200 flight hours per month in a Pipistrel Alpha Trainer fleet at a $75 per hour wet rate on the official Mesa Airlines careers page. Once you hold an ATP or Restricted Privileges ATP (R-ATP) certificate for Part 121 operations, Mesa First Officer pay starts at $100 per hour with a direct career pathway to United Airlines through the United Aviate program.
Last checked November 6, 2026.
Bridge Air Time-Building and ATP Hour Sponsorship
Reaching the 1,500 flight hours required for an unrestricted Airline Transport Pilot (ATP) certificate is often the longest step between commercial flight school and a regional airline flight deck. Pilots searching for the Mesa Pilot Development (MPD) program will find that, according to the official Mesa Airlines website (2024), Mesa was the first regional airline in the industry to sponsor flight hours to provide quick, lower-cost access to ATP training.
On its careers portal, Mesa highlights its time-building partnership with Bridge Air (accessible via info@bridge-air.net). Instead of instructing for two years or paying steep twin-engine rental rates, commercial pilots use the Bridge Air program to log high-volume flight time.
By our calculation from Mesa Airlines' published Bridge Air program figures, logging 200 flight hours per month at the $75 per hour wet rate costs $15,000 per month in flight time and builds 1,000 hours in 5 months. Confirm current financing terms and your exact hour agreement directly with Bridge Air when you apply.
- Aircraft fleet: State-of-the-art Pipistrel Alpha Trainer fleet.
- Monthly flight pace: Over 200 flight hours per month available.
- Hourly cost: $75 per hour wet rate on a pay-as-you-go basis.
- Payment options: Financing is available.
| Hours Needed for ATP/R-ATP | Estimated Months at 200 Hours/Month | Total Flight Time Cost at $75/Hour Wet |
|---|---|---|
| 500 hours | 2.5 months | $37,500 |
| 750 hours | 3.75 months | $56,250 |
| 1,000 hours | 5.0 months | $75,000 |
FAA Part 121 First Officer Requirements and the ATP CTP
To fly as a First Officer for Mesa Airlines, you must meet the Federal Aviation Administration (FAA) regulatory rules for Part 121 air carriers. Under FAA Advisory Circular 61-138, every Pilot in Command (PIC) and Second in Command (SIC) in Part 121 operations must hold an ATP certificate.
If you graduated from an FAA-authorized institution of higher education with a qualifying aviation degree, you do not need to wait until 1,500 hours. As noted on the FAA Pilot Training ATP portal, authorized university graduates can apply for a Restricted Privileges ATP (R-ATP) certificate with reduced aeronautical experience under 14 CFR 61.160. An R-ATP allows you to serve as a Part 121 co-pilot until you log the full 1,500 hours.
Before taking the Airline Transport Pilot Multiengine Airplane (ATM) knowledge test, all applicants for a multiengine ATP certificate or an ATP certificate issued concurrently with an airplane type rating must complete the ATP Certification Training Program (ATP CTP) under 14 CFR 61.156. According to the FAA Airline Transport Pilot and Type Rating Airman Certification Standards (FAA-S-ACS-11A, November 2023), once you hold your ATP CTP graduation certificate, you are eligible to sit for the ATM written exam.
- ATP CTP Academic Instruction: At least 30 hours of classroom instruction. This includes at least 8 hours on aerodynamics, 2 hours on meteorology, 14 hours on air carrier operations, and 6 hours on leadership, professional development, crew resource management (CRM), and safety culture.
- ATP CTP Simulator Training: At least 10 hours of training in a Flight Simulation Training Device (FSTD) qualified under 14 CFR Part 60. At least 6 hours must take place in a Level C or higher Full Flight Simulator (FFS) representing an aircraft with a maximum takeoff weight (MTOW) of at least 40,000 pounds, and up to 4 hours may be in a Level 4 or higher Flight Training Device (FTD).
- Written Exam Standards: The ATM knowledge test consists of 125 questions with a 4.0-hour time limit, a minimum age of 18, and a minimum passing score of 70.
Mesa Airlines Pilot Pay, Bonuses, and United Aviate Path
Mesa Airlines offers entry tracks for newly qualified First Officers as well as experienced Part 121 pilots looking for accelerated upgrades or direct captain entry. All pilot tracks include Part 121 longevity matching so you can bring prior carrier experience with you, alongside opt-in access to the United Aviate program for a direct path to a United Airlines flight deck.
For pilots who already hold Part 121 time, Mesa divides its captain incentives into two tracks: the Near-Entry Captain Program and the Direct-Entry Captain Program.
| Program / Role | Key Eligibility & Milestones | Published Compensation & Bonus |
|---|---|---|
| First Officer | Part 121 ATP or R-ATP qualified | Starting at $100 per hour |
| Near-Entry Captain Program | New hire with 750+ hours toward Part 121 upgrade eligibility. Upgrade upon reaching 1,000 hours | $40,000 bonus paid out after new hire Initial Operating Experience (IOE) |
| Direct-Entry Captain Program | Part 121 Captain qualified. Unlimited Part 121 longevity match | Up to $215 per hour. $110,000 sign-on bonus paid at completion of training |
How to Prepare for Your Mesa Airlines Technical Interview
When you interview for a First Officer or cadet position, your technical evaluation tests the exact bridge between commercial single-engine or light-twin flying and Part 121 jet operations. The FAA designed the ATP ACS (FAA-S-ACS-11A) and Advisory Circular 61-138 specifically to define what a Part 121 pilot must know. Use the checklist below, built by our team from those two FAA standards, to organize your technical study in the two weeks before your interview.
Focus first on Instrument Procedures and Air Carrier Operations. Evaluators check that you understand transport category performance, how to brief an approach, and when an approach becomes unstable.
- Stabilized Approach Criteria: Know the exact numbers. You must depart the final approach fix configured for landing, at the proper approach speed, power setting, and flightpath before descending below the minimum stabilized approach height (1,000 feet above the airport elevation) and at a rate of descent no greater than 1,000 feet per minute unless specifically briefed.
- Precision and Non-Precision Approach Tolerances: On the final approach segment from the Final Approach Fix (FAF) to Decision Altitude (DA) or Decision Height (DH), allow no more than ¼-scale deflection of either the vertical or lateral guidance, and hold target airspeed within plus or minus 5 knots. On a non-precision approach, hold altitude above Minimum Descent Altitude (MDA) within +50/-0 feet to the visual descent point or missed approach point.
- High-Altitude Aerodynamics: Be ready to explain the flight characteristics of swept-wing airplanes, Mach buffet, Dutch roll, yaw damper usage, and the convergence of Maximum Operating Speed in knots (VMO), Maximum Operating Speed in Mach (MMO), and stall angle of attack (AOA) at high altitude and high weight.
- Stall and Upset Recovery: Understand that reducing angle of attack (AOA) is the primary step in every stall recovery. For a nose-high upset, disconnect the autopilot and autothrottle, apply nose-down elevator to achieve a nose-down pitch rate, adjust thrust, and roll up to 60 degrees if needed. For a nose-low upset, disconnect automation, recover from any stall first, roll in the shortest direction to wings level before pulling up, and adjust thrust and drag.
- Transport V-Speeds and Runway Performance: Define VMCG (minimum control speed on the ground with the critical engine inoperative), VMCA (minimum control speed in the air out of ground effect), V1 (decision speed), V2 (takeoff safety speed), balanced field length, accelerate-go distance, and accelerate-stop distance.
- Dispatch, MEL, and CDL Rules: Explain joint operational control between the captain and the dispatcher, the difference between a Minimum Equipment List (MEL) for inoperative systems and a Configuration Deviation List (CDL) for missing external secondary airframe parts, and MEL repair interval categories A, B, C, and D.
- Ground Deicing and Clean Wing Concept: Review fluid types, how to read holdover time tables, and why a pre-takeoff contamination check is required when operating in icing conditions.
Preparing for Behavioral and CRM Interview Questions
Alongside technical questions, airline interview panels evaluate how you function in a two-pilot cockpit. Under FAA AC 61-138, leadership, professional development, and Crew Resource Management (CRM) make up a dedicated 6-hour module of Part 121 training. When answering Tell Me About a Time (TMAAT) and scenario questions, frame your stories around the FAA's core CRM and safety principles.
In a multi-crew aircraft, CRM is defined in the FAA standard as focusing on the proper response to threats to safety and the proper management of crew error. Ground your interview examples in how you act as an effective Pilot Monitoring (PM), how you challenge errors respectfully, and how you maintain a sterile flight deck.
- Pilot Monitoring (PM) Intervention: Show that you monitor airspeed, attitude, and flight mode annunciations actively and speak up immediately when the aircraft diverges from the intended flightpath.
- Positive Exchange of Flight Controls: Always reference the FAA three-step exchange. The pilot relinquishing control says, 'You have the flight controls.' The pilot taking control says, 'I have the flight controls.' The first pilot repeats, 'You have the flight controls,' and visually confirms the exchange.
- Voluntary Safety Programs: Be familiar with how Part 121 carriers use the Aviation Safety Action Program (ASAP), the Aviation Safety Reporting System (ASRS), Flight Operational Quality Assurance (FOQA), and Line Operations Safety Audits (LOSA) to solve safety problems without punishment.
Mesa Airlines Fleet, Crew Bases, and Republic Airways Merger
When you discuss why you want to fly for Mesa Airlines in your interview, know the current structure of the operation and how its pages describe the fleet. On the main Mesa Airlines homepage, the company announces that Mesa Airlines has merged with Republic Airways, and notes that based in Phoenix, Arizona, it operates a fleet of 60 Embraer 175 aircraft serving as a partner for United Airlines under the United Express brand. United Airlines flies to 238 domestic destinations and 118 international destinations in 48 countries or regions, and Mesa also highlights joint sustainable aviation investments alongside United in electric aircraft companies Heart Aerospace and Archer Aviation.
Across its main homepage and its careers page, Mesa lists operations and crew bases spanning its network. The careers page cites 6 hubs, 168 aircraft, 360 daily departures, and 2,600 employees, operating the Embraer E175 and CRJ-900 for United Express alongside a 737-400F cargo operation.
- Houston (IAH): Mesa's largest base for Embraer E175 aircraft operating as United Express, flying to destinations from Havana to Montana to Cabo.
- Washington Dulles (IAD): Mesa's second Embraer E175 base for United Express, serving routes from Montreal down to The Bahamas.
- Louisville (SDF): Listed on both the homepage and careers page as a third CRJ-900 base.
- Phoenix (PHX), Dallas, and Cincinnati (CVG): Corporate headquarters is in Phoenix (410 N 44th St Suite 700), which the careers page also lists with Dallas as CRJ-900 bases, while Cincinnati/Northern Kentucky International Airport is home to the 737-400F cargo base.
Practice question
Practice technical and CRM scenario question: You are the Pilot Monitoring on an ILS approach in instrument conditions. Descending through 900 feet above airport elevation, you notice your Captain's descent rate is 1,300 feet per minute and the airspeed is 12 knots above VREF. What are the FAA stabilized approach standards, and how do you handle this situation?
Example answer, written by us. It is not a real applicant's story. Under the FAA ATP Airman Certification Standards, a stabilized approach requires that we depart the final approach fix configured for landing, at our proper approach speed, power setting, and flightpath before descending below the minimum stabilized approach height of 1,000 feet above the airport elevation. Our descent rate must be no greater than 1,000 feet per minute unless we specifically briefed otherwise, and our airspeed tolerance on final is plus or minus 5 knots with no more than a ¼ scale deflection on the localizer or glideslope. At 900 feet above airport elevation, descending at 1,300 feet per minute and 12 knots fast means we are unstabilized below the 1,000-foot gate. As Pilot Monitoring, my job under Crew Resource Management is to monitor the aircraft state and challenge flightpath deviations immediately. I would first call out the specific deviation clearly, stating airspeed and sink rate. Since we are already inside 1,000 feet above the airport and outside stabilized parameters, I would call for an immediate go-around, verify that the Captain initiates the missed approach, and assist with flaps, gear retraction, and ATC calls.
This answer states the exact numbers from FAA-S-ACS-11A Appendix 3 (1,000 feet above airport elevation, 1,000 feet per minute maximum descent rate, plus or minus 5 knots, and ¼ scale deflection) and pairs them with the Pilot Monitoring intervention duties from FAA Advisory Circular 61-138.
Practice this on Fourstripe. A panel captain asks TMAAT, about-you, technical and scenario questions out loud, follows up on what you said, and scores every answer. 7-day trial, then from $149 a week. Start a practice interview
Fourstripe is not affiliated with or endorsed by Mesa Airlines.
Frequently asked questions
How does Mesa Airlines help pilots build flight hours toward their ATP certificate?
Mesa Airlines sponsors flight hours to help commercial pilots meet the 1,500-hour ATP rule and partners with Bridge Air to offer over 200 flight hours per month in a Pipistrel Alpha Trainer fleet. Flight time through Bridge Air is billed on a pay-as-you-go basis at a $75 per hour wet rate, and financing is available.
What are the pay rates and sign-on bonuses for pilots at Mesa Airlines?
According to Mesa Airlines' careers page, First Officer pay starts at $100 per hour and Captain pay reaches up to $215 per hour. Pilots entering the Near-Entry Captain Program with 750 or more qualifying Part 121 hours receive a $40,000 bonus after IOE, while Direct-Entry Captains receive a $110,000 sign-on bonus at the completion of training.
Did Mesa Airlines merge with Republic Airways?
Yes, Mesa Airlines states on its official homepage that it has merged with Republic Airways. Mesa operates flights on behalf of its major airline partner United Airlines under the United Express brand and participates in the United Aviate program.
Can I fly as a Part 121 First Officer with fewer than 1,500 flight hours?
Yes. While Part 121 rules require every Second in Command (SIC) to hold an ATP certificate, the FAA authorizes specific institutions of higher education to certify aviation degree graduates for a Restricted Privileges ATP (R-ATP) under 14 CFR 61.160. An R-ATP allows a pilot with fewer than 1,500 hours to serve as a co-pilot until reaching 1,500 hours.
What are the FAA requirements for the ATP Certification Training Program (ATP CTP)?
Under 14 CFR 61.156 and FAA AC 61-138, the ATP CTP requires at least 30 hours of classroom instruction and at least 10 hours of training in a qualified Flight Simulation Training Device. At least 6 of those simulator hours must be completed in a Level C or higher Full Flight Simulator representing an aircraft with a maximum takeoff weight of at least 40,000 pounds.