PC-12 Pilot Requirements, Part 135 Minimums, and SIC Rules

Short answer: To fly for hire as a PC-12 pilot in the United States, you need at least a commercial pilot certificate with an airplane single-engine rating (requiring 250 total flight hours under 14 CFR 61.129) and an instrument rating. To act as pilot in command (PIC) under Part 135 instrument flight rules (IFR), 14 CFR 135.243(c) requires at least 1,200 total flight hours, while serving as a second in command (SIC) requires a commercial certificate and instrument rating under 14 CFR 135.245.

Role of a PC-12 Pilot in U.S. Operations

Working as a PC-12 pilot (often searched as pc 12 pilot) puts you at the controls of a single-engine, turbine-powered, pressurized airplane. Under Federal Aviation Administration (FAA) rules, pilots fly single-engine turboprops across Part 91 corporate operations and Part 135 commuter and on-demand operations.

Your certification and flight duties are governed by two parts of Title 14 of the Code of Federal Regulations (14 CFR), current as of November 9, 2026: Part 61 for foundational pilot certificates, and Part 135 for commuter and on-demand air carrier operations.

FAA Commercial Certificate Requirements (Part 61)

Every professional PC-12 pilot job starts with an FAA commercial pilot certificate with an airplane category and single-engine class rating. Under 14 CFR 61.123, you must be at least 18 years old, be able to read, speak, write, and understand English, hold at least a private pilot certificate (or meet 14 CFR 61.73 military competency rules), and pass both the aeronautical knowledge test (14 CFR 61.125) and the practical flight test (14 CFR 61.127).

Under 14 CFR 61.129(a), applying for a commercial single-engine airplane rating requires at least 250 hours of flight time as a pilot (or 190 hours if you satisfactorily complete an approved commercial pilot course at a Part 142 training center under 14 CFR 61.129(i)(3)). You can credit up to 50 hours in a qualified full flight simulator or flight training device toward the 250-hour total (or up to 100 hours inside an approved Part 142 course).

Your 250 total hours under 14 CFR 61.129(a) must include these specific minimums:

  • 100 hours in powered aircraft, of which at least 50 hours must be in airplanes.
  • 100 hours of pilot-in-command (PIC) flight time, including at least 50 hours in airplanes and 50 hours in cross-country flight (at least 10 hours of that cross-country time in airplanes).
  • 20 hours of flight training on the commercial areas of operation, including 10 hours of instrument training using a view-limiting device (at least 5 hours in a single-engine airplane).
  • 10 hours of training in a complex airplane, a turbine-powered airplane, or a technically advanced airplane (TAA), or any combination of the three.
  • One 2-hour day cross-country training flight and one 2-hour night cross-country training flight in a single-engine airplane, each covering a straight-line distance of more than 100 nautical miles from the original departure point.
  • 3 hours of flight training in a single-engine airplane with an authorized instructor in preparation for the practical test within the 2 calendar months before the month of the test.
  • 10 hours of solo flight time in a single-engine airplane, or 10 hours performing the duties of PIC with an authorized instructor on board. This time must include one cross-country flight of at least 300 nautical miles total distance with landings at a minimum of three points. One segment must be at least 250 nautical miles straight-line distance from the departure point, or 150 nautical miles in Hawaii. It must also include 5 hours in night VFR conditions with 10 takeoffs and 10 landings in the traffic pattern at an airport with an operating control tower.

Why You Need an Instrument Rating and How EASA Differs

While you can technically take a commercial practical test without an instrument rating, you cannot work as a normal charter or corporate PC-12 pilot without one. Under 14 CFR 61.133(b)(1), a commercial pilot who does not hold an instrument rating in the same category and class receives a certificate limitation prohibiting the carriage of passengers for hire in airplanes on cross-country flights beyond 50 nautical miles or at night.

In addition, 14 CFR 135.243(b)(3) and (c)(3) require an instrument rating (or an Airline Transport Pilot certificate with an airplane category rating) for both VFR and IFR Part 135 airplane captains. The only exception under 14 CFR 135.243(d) applies to single reciprocating-engine airplanes in isolated areas flown day VFR within 250 nautical miles of base, which does not apply to a turbine airplane.

If you plan to fly a PC-12 in Europe under European Union Aviation Safety Agency (EASA) rules rather than FAA rules, the licensing structure is different. According to the EASA Class and Type Rating and Endorsement Lists (Aeroplanes list updated February 12, 2026), EASA categorizes airplanes under Annex I (Part-FCL) of Commission Regulation (EU) No 1178/2011 into specific Single-Engine Turbine (SET) class and type ratings and license endorsements, and indicates whether Operational Suitability Data (OSD) Flight Crew references apply.

Part 135 PIC Minimums: VFR, IFR, and Eligible On-Demand

Under 14 CFR 135.243(a)(1), an Airline Transport Pilot (ATP) certificate is required for passenger-carrying Part 135 PICs only when flying a turbojet airplane, an airplane with a passenger-seat configuration of 10 seats or more (excluding crewmember seats), or a multiengine airplane in a commuter operation. Because a single-engine turboprop configured with 9 or fewer passenger seats falls outside paragraph (a)(1), a pilot can serve as PIC with a commercial pilot certificate and instrument rating once they meet the hour requirements in 14 CFR 135.243(b) or (c).

A pilot who earns a Part 61 commercial single-engine certificate at the 250-hour minimum needs an additional 950 total flight hours and 450 additional cross-country hours to qualify as a Part 135 IFR captain.

The table below compares the exact FAA hour requirements across Commercial Part 61, Part 135 VFR PIC, Part 135 IFR PIC, and Part 135 Eligible On-Demand operations.

FAA Pilot Qualification Minimums (14 CFR Part 61 and Part 135, as of November 2026)

Requirement Part 61 Commercial ASEL (61.129) Part 135 VFR PIC (135.243(b)) Part 135 IFR PIC (135.243(c)) Eligible On-Demand PIC / SIC (135.4)
Minimum Pilot Certificate Private Pilot (to apply) Commercial Pilot + Instrument Commercial Pilot + Instrument Commercial Pilot + Instrument (single-engine)
Total Pilot Flight Time 250 hours (190 Part 142) 500 hours 1,200 hours 1,500 hours PIC / 500 hours SIC
Cross-Country Flight Time 50 hours PIC cross-country 100 hours 500 hours Per Part 61 / 135 rules
Night Flight Time 5 hours night VFR + 2-hr XC 25 hours (of the XC time) 100 hours Per Part 61 / 135 rules
Instrument Time 10 hours training Instrument rating required 75 hours (at least 50 in actual flight) Instrument rating required

Single-Pilot Autopilot Rules vs. Logging SIC Time (SIC PDP)

In Part 135 operations, a single-engine turbine airplane configured with 9 or fewer passenger seats can be flown either single-pilot or with a two-pilot crew. How the operator dispatches the flight determines how you qualify and how you log your hours.

Under 14 CFR 135.105, an operator may fly an aircraft without a second in command if it is equipped with an operative, approved three-axis autopilot system and authorized by the operator's operations specifications. If that single-pilot operation is a commuter operation as defined in Part 119, 14 CFR 135.105(a) requires the PIC to have at least 100 hours of PIC flight time in the specific make and model of aircraft to be flown.

Many Part 135 operators use a two-pilot crew in single-engine turboprops and hire lower-time commercial pilots as First Officers (second in command, or SIC). Because the aircraft itself does not require two pilots by type certification, an SIC can only log that time toward an ATP certificate if the operator holds an approved Second-in-Command Professional Development Program (SIC PDP) in its operations specifications under 14 CFR 135.99(c).

To log SIC time legally under a 14 CFR 135.99(c) SIC PDP, four strict rules apply:

  • The aircraft must be a multiengine airplane or a single-engine turbine-powered airplane equipped with an independent set of controls for the second pilot (which may not include a throwover control wheel) plus independent instrumentation and equipment.
  • The assigned PIC must have been fully qualified to serve as a Part 135 PIC for that certificate holder for at least the previous 6 calendar months.
  • Under 14 CFR 135.245(a), the SIC must hold at least a commercial pilot certificate with appropriate category and class ratings and an instrument rating.
  • Under 14 CFR 135.245(c), to serve under IFR, the SIC must maintain instrument experience. Within the preceding 6 calendar months, the pilot must log at least six instrument approaches, holding procedures, and intercepting and tracking courses. In an airplane, the pilot performs these in actual weather or under simulated instrument conditions using a view-limiting device. In an approved FSTD, a qualified flight instructor (135.338) or check pilot (135.337) must observe the tasks and sign the training record. If this currency lapses for more than 6 calendar months, the SIC must complete an instrument recency check under 14 CFR 135.245(d).

Eligible On-Demand Crew Pairing and Operating Limits

Some charter operators fly under the "eligible on-demand operation" rules in 14 CFR 135.4 to access specific landing performance and approach provisions (such as 14 CFR 135.225(b), 135.385(f), and 135.387(b)). Under 14 CFR 135.4(a), an eligible on-demand flight requires a two-pilot crew where the PIC has at least 1,500 total hours and the SIC has at least 500 total hours. For single-engine aircraft, both pilots must hold at least a commercial pilot certificate and an instrument rating (multiengine turbine aircraft require an ATP for the PIC).

Under 14 CFR 135.4(a)(4), either the PIC or the SIC must have at least 75 hours of flight time in that aircraft make or model. Furthermore, under 14 CFR 135.4(a)(3), if the SIC has fewer than 100 hours of flight time as SIC in the aircraft make and model and the PIC is not a qualified check pilot, the PIC must personally make all takeoffs and landings in any of the following conditions:

  • At any destination airport where a Destination Airport Analysis is required by 14 CFR 135.385(f).
  • When prevailing visibility at the airport is at or below 3/4 mile, or runway visual range (RVR) for the runway to be used is at or below 4,000 feet.
  • When the runway has water, snow, slush, ice, or similar contamination that may adversely affect aircraft performance.
  • When reported braking action on the runway is less than "good."
  • When the crosswind component for the runway is in excess of 15 knots.
  • When windshear is reported in the vicinity of the airport, or in any other condition where the PIC determines it is prudent to exercise PIC authority.

Part 135 Equipment, Oxygen, and Autopilot Altitude Rules

Technical interviews and oral evaluations for a PC-12 pilot position test your working knowledge of Part 135 operating limitations for pressurized, turbine-powered airplanes. Under 14 CFR 135.154(b)(2), any turbine-powered airplane configured with 6 to 9 passenger seats (excluding any pilot seat) must be equipped with an approved Terrain Awareness and Warning System (TAWS) that meets at least Class B equipment requirements in Technical Standard Order (TSO)-C151.

High-altitude oxygen rules under 14 CFR 135.89 and 14 CFR 135.157 are a staple of Part 135 oral testing:

  • Whenever a pressurized aircraft is operated with a cabin pressure altitude above 10,000 feet MSL, pilots must comply with unpressurized oxygen use rules (14 CFR 135.89(b)(1)).
  • Whenever a pressurized aircraft flies above 25,000 feet through 35,000 feet MSL, unless each pilot has an approved quick-donning oxygen mask, at least one pilot at the controls must wear a secured and sealed oxygen mask that supplies oxygen continuously or automatically whenever cabin pressure altitude exceeds 12,000 feet MSL (14 CFR 135.89(b)(2)).
  • If one pilot leaves a pilot duty station above 25,000 feet MSL, the remaining pilot at the controls must put on and use an approved oxygen mask until the other pilot returns (14 CFR 135.89(b)(4)).
  • For passengers in a pressurized aircraft flying above 25,000 feet MSL, 14 CFR 135.157(b)(1) requires at least a 10-minute supply of supplemental oxygen for each occupant other than the pilots for use during an emergency descent.
  • Under 14 CFR 135.93, no person may use an autopilot for takeoff or initial climb below the higher of 500 feet or twice the altitude loss specified in the Airplane Flight Manual (AFM), nor on approach lower than 50 feet below the DA(H) or MDA unless specific AFM and coupling criteria in 14 CFR 135.93(d) are met.

Annual Testing, Checkrides, and How to Prepare

Once hired by a Part 135 operator, you must pass initial and recurrent testing every 12 calendar months under 14 CFR 135.293. Paragraph (a) requires an annual written or oral test given by the FAA Administrator or an authorized check pilot, and paragraph (b) requires an annual flight competency check in the class of aircraft (for a single-engine airplane other than turbojet). Under 14 CFR 135.293(d), an instrument proficiency check (IPC) under 14 CFR 135.297 may be substituted for the competency check. The standard in 14 CFR 135.293(e) requires that the pilot be the obvious master of the aircraft, with the successful outcome of the maneuver never in doubt.

Use this checklist to prepare for a Part 135 PC-12 technical interview and your 14 CFR 135.293(a) oral exam:

  • Audit your logbook against 14 CFR 135.243(c) or 135.245: Tag your exact totals for cross-country (500 hours for IFR PIC), night (100 hours for IFR PIC), and actual vs. simulated instrument time (75 hours total, with at least 50 hours in actual flight for IFR PIC).
  • Check your 6-month IFR currency under 14 CFR 135.245(c): Verify that your six approaches, holding procedures, and course intercepting/tracking tasks are logged within the preceding 6 calendar months.
  • Study aircraft systems and AFM limitations (14 CFR 135.293(a)(2)-(3)): Review the powerplant, electrical, pressurization, deicing, and weight and balance calculations for takeoff, en route, and landing.
  • Memorize high-altitude and severe weather procedures (14 CFR 135.293(a)(6)-(7)): Be ready to explain frontal systems, icing, low-altitude windshear escape, thunderstorm penetration altitudes, and clear air turbulence.
  • Practice telling your own operational stories out loud: Prepare specific examples from your flying background showing aeronautical decision-making, compliance with 14 CFR 135.69 (restricting or suspending operations for hazardous airport or runway conditions), and crew resource management.

Practice example

You are acting as PIC of a pressurized PC-12 at FL280 in an eligible on-demand Part 135 operation. Your SIC has 60 hours in make and model, and destination crosswinds are 18 knots. What oxygen rules apply at cruise, and who must make the landing?

Example answer, written by us. It is not a real applicant's story. First, for cruise at FL280, 14 CFR 135.89(b)(2) applies because we are in a pressurized airplane above 25,000 feet through 35,000 feet MSL. Unless we both have approved quick-donning oxygen masks, at least one pilot at the controls must wear a secured and sealed oxygen mask that supplies oxygen continuously or automatically whenever cabin pressure altitude exceeds 12,000 feet MSL, and the other pilot must have a connected mask ready for immediate use. Also, under 135.89(b)(4), if either pilot leaves their duty station above 25,000 feet MSL, the remaining pilot must put on and use an approved mask until the other pilot returns. Second, for the landing, under 14 CFR 135.4(a)(3), because my SIC has fewer than 100 hours as SIC in make and model and I am not a check pilot, I must make the takeoff and landing whenever the crosswind component exceeds 15 knots. With an 18-knot crosswind, I will brief the approach and fly the landing myself.

This answer cites the exact regulations (14 CFR 135.89(b)(2) and 14 CFR 135.4(a)(3)) and matches every numerical threshold in the prompt (FL280 vs. 25,000 feet, 60 hours vs. 100 hours in make and model, and 18 knots vs. the 15-knot crosswind limit).

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

What certificates and ratings do you need to be a PC-12 pilot?

Under 14 CFR 61.123, 61.129(a), and 135.243, you need at least an FAA commercial pilot certificate with an airplane single-engine rating and an airplane instrument rating. Without an instrument rating, 14 CFR 61.133(b)(1) prohibits carrying passengers for hire on cross-country flights beyond 50 nautical miles or at night.

How many flight hours do you need to be a Part 135 PC-12 captain?

Under 14 CFR 135.243(c), serving as pilot in command (PIC) under IFR requires at least 1,200 total flight hours, including 500 hours of cross-country time, 100 hours of night time, and 75 hours of actual or simulated instrument time (with at least 50 hours in actual flight). For VFR-only operations, 14 CFR 135.243(b) requires 500 total hours, 100 hours cross-country, and 25 hours of night cross-country time.

Can a First Officer log SIC time in a single-engine PC-12?

Yes, if the flight is conducted under an FAA-approved Second-in-Command Professional Development Program (SIC PDP) authorized in the operator's operations specifications under 14 CFR 135.99(c). The aircraft must be a single-engine turbine-powered or multiengine airplane with independent dual controls (not a throwover control wheel) and independent flight instruments, and the PIC must have at least 6 calendar months of experience as a qualified PIC for that certificate holder.

Can a PC-12 be flown single-pilot in Part 135 charter operations?

Yes. Under 14 CFR 135.105, an operator may fly an aircraft configured for 9 or fewer passengers without a second in command if the aircraft has an operative, approved three-axis autopilot system and the operator holds operations specifications authorizing autopilot use in place of an SIC. For commuter operations, the PIC must also have at least 100 hours of PIC time in that specific make and model.

What are the flight hour minimums for a Part 135 PC-12 First Officer?

Under 14 CFR 135.245(a), a standard Part 135 second in command must hold a commercial pilot certificate with an airplane single-engine rating (which requires 250 total hours under 14 CFR 61.129(a), or 190 hours in an approved Part 142 course) and an instrument rating. If the operator conducts two-pilot eligible on-demand operations under 14 CFR 135.4, the SIC must have at least 500 total flight hours.

Sources