Pilot Training Simulator: FAA and EASA Classifications, Logging Rules, and Home Software Guide
Short answer: A pilot training simulator only counts toward FAA or EASA certificates and currency when the complete hardware and software station holds an active regulatory approval, such as a 5-year FAA Letter of Authorization under Advisory Circular 61-136B or a 14 CFR Part 60 Statement of Qualification. Uncertified home software like Microsoft Flight Simulator helps you rehearse cockpit flows, whereas certified flight simulators for pilot training span Basic and Advanced Aviation Training Devices (BATDs and AATDs), Part 60 Flight Training Devices (Levels 4 to 7), and Full Flight Simulators (Levels A to D). Even in an approved course, 14 CFR Part 141 Appendix C caps combined simulator and training device credit at 50 percent of required instrument training.
How pilot training simulators are classified: From home software to Level D
Searching for a pilot training simulator returns three distinct products: casual aviation video games such as Pilot Training Flight Simulator, consumer desktop programs such as Microsoft Flight Simulator, and aviation-authority-approved training devices that carry legal logbook credit. Before paying for pilot simulator training, match the device tier to whether you want unpaid home procedure practice or accredited aeronautical experience.
Neither the FAA nor EASA names a single best flight simulator for pilot training, and no single setup wins every best flight simulator pilot training comparison on its own. Instead, regulators qualify the complete integrated station, pairing specific physical flight controls, instrument panels, visual displays, and software aerodynamic models with approved training tasks.
In the United States, certified devices split across two regulatory tracks. Flight Training Devices (FTD Levels 4 to 7) and Full Flight Simulators (FFS Levels A to D) are qualified on site by the FAA National Simulator Program (NSP) Branch under 14 CFR Part 60, and 14 CFR 141.41 requires Part 141 pilot schools to show that every simulator and training device in an approved curriculum holds FAA qualification and task approval.
FAA and EASA Pilot Training Simulator Tiers (Sources: faa.gov, ecfr.gov, and easa.europa.eu, 2026)
| Simulator Tier | Governing Rule | Qualification Standard | Primary Training Role |
|---|---|---|---|
| Consumer Desktop Software and Games | None (unregulated home use ) | Personal computer and consumer peripherals without regulatory qualification | Checklist rehearsal and avionics buttonology with zero loggable hours |
| Basic Aviation Training Device (BATD ) | FAA 14 CFR 61.4(c ) | Physical aircraft controls, 8 panel switch groups, startup self-test, and 5-year LOA | Procedural and instrument tasks for Private Pilot, Instrument Rating, and recency |
| Advanced Aviation Training Device (AATD ) | FAA 14 CFR 61.4(c ) | BATD standards plus ergonomic cockpit, adjustable seat, instructor station, and 2-axis autopilot | Adds Commercial Pilot, ATP, Flight Instructor, and Instrument Proficiency Check (IPC ) credit |
| Flight Training Device (FTD Levels 4 to 7 ) | FAA 14 CFR Part 60 and 141.41 | Aircraft-specific flight deck systems, Statement of Qualification, and sponsor quality system | Systems management, abnormal flows, and commercial or multi-crew transition |
| Full Flight Simulator (FFS Levels A to D ) | FAA 14 CFR Part 60 and EASA CS-FSTD | Full-scale cockpit with motion, airport visual models, UPRT/icing compliance, and recurrent checks | Airline type ratings, recurrent proficiency checks, and high-risk emergency training |
| EASA FSTD Capability Signature (FCS ) | Regulation (EU ) 2026/781 and CS-FSTD Issue 1 | Capability-based fidelity signature covering touchscreens and Extended Reality (XR ) | Task-to-tool matching for airplane and helicopter type ratings and recurrent checks |
Is Microsoft Flight Simulator good for pilot training, and why home setups cannot be logged
Students starting ground school often ask whether a home flight simulator is good for pilot training or whether Microsoft Flight Simulator pilot training helps before solo. Using a desktop flight simulator for pilot training works well when you treat it strictly as an interactive cockpit poster for memorizing checklist sequences, practicing instrument scans, setting up Global Positioning System (GPS) approaches, and visualizing holding entries.
Installing aviation software on a home computer never creates an FAA-approved or EASA-qualified pilot flight training simulator. An approved ATD combines tested software and physical hardware documented word for word in an FAA-approved Qualification and Approval Guide (QAG), verified during an aviation safety inspector evaluation, and backed by an active Letter of Authorization (LOA). Even when an ATD manufacturer licenses commercial simulation software, it must attest to full hardware compatibility in the QAG, and unauthorized panel changes can terminate the approval.
FAA ATD design criteria also prohibit using a keyboard, mouse, or gaming joystick to control the aircraft in simulated flight. Aside from initial setup, you cannot click a mouse or press a key to move landing gear, wing flaps, cowl flaps, carburetor heat, mixture, propeller, or throttle controls. Because ATDs have no requirement to replicate exact aircraft control-loading forces, unsupervised home flight simulator pilot training often builds three negative habits.
- Chasing instruments during visual flight: Staring at airspeed and vertical speed tapes on a monitor instead of holding pitch attitudes against the real horizon outside.
- Trimming and flaring by sight instead of feel: Without aerodynamic control pressures on the yoke and rudder pedals, students form poor muscle memory for slow flight, crosswind rudder coordination, and the landing flare.
- Pausing when task-saturated: Hitting pause or resetting an approach removes the workload management and go-around decision-making required in real airspace.
BATD vs AATD: FAA Aviation Training Device rules, syllabus, and credit limits
In general aviation, BATDs and AATDs are the primary flight simulators for pilot training. Both allow an authorized instructor to pause a flight, record horizontal and vertical ground tracks for debriefing, and trigger live failures of engines, alternators, vacuum pumps, pitot-static instruments, electronic flight displays, landing gear, or flaps without freezing the session.
Airplane BATDs require a self-centering displacement yoke or stick, self-centering rudder pedals, continuous throttle/propeller/mixture controls, physical pitch trim, flaps, gear handle (if applicable), comms/nav radios, transponder, clock or timer, and altimeter, while helicopter BATDs require a cyclic, collective, rotor rpm throttle, antitorque pedals, and mixture/condition control. Every ATD must include physical switches for at least 8 panel functions (master/battery, magnetos, alternators or generators, auxiliary power unit if applicable, fuel boost pumps, avionics master, pitot heat, and exterior lighting), respond with zero perceptible lag, maintain day VFR and IFR equipment under 14 CFR 91.205, and carry a 25-nautical-mile local navigational database based on 14 CFR Part 97 procedures. AATDs add realistic switch sizing and reach distances, an adjustable fixed pilot seat, day and night airport visuals, a two-axis autopilot and flight director when original standard equipment, a separate real-time instructor station, and automated ATC communications or scenario-based training.
Strict statutory ceilings apply to both tiers. ATDs cannot be used for practical tests, aircraft-type-specific training, type ratings, solo flight, night flight, cross-country flight, or takeoffs and landings, and the 3 hours of instrument maneuvering for a Private Pilot certificate under 14 CFR 61.109(a)(3) must be flown in a single-engine airplane. Combined BATD, AATD, FTD, and FFS hours toward an Instrument Rating cannot exceed 14 CFR 61.65 limits or the 50 percent maximum in 14 CFR Part 141 Appendix C paragraph 4(b)(4).
To get full value from those hours, the FAA outlines a three-step integrated curriculum: classroom ground theory, psychomotor practice in an approved trainer, and immediate transition to the aircraft. By our count from FAA AC 61-136B Appendix D, the FAA specifies 18 integrated syllabus task categories: 13 flight-control, weather, and failure-management tasks (partial panel, timed and compass turns, instrument or PFD/GPS/autopilot failures, unexpected weather, turbulence, loss-of-control procedures, unusual attitudes, and engine, electrical, or hydraulic failures) plus 5 navigation and holding tasks (VOR/LOC/ILS/RNAV/GPS tracking, published holds, DME, and 2 optional items for ADF/NDB and autopilot/flight director use).
BATD vs AATD Authorized FAA Credits and Features (Source: faa.gov)
| Credit or Feature | Basic Aviation Training Device (BATD ) | Advanced Aviation Training Device (AATD ) |
|---|---|---|
| Certificate and Rating Credit | Private Pilot Certificate and Instrument Rating | Private Pilot, Instrument Rating, Commercial Pilot, ATP, and Flight Instructor |
| Currency and Proficiency | Instrument recency of experience and pilot time | Instrument recency, Instrument Proficiency Check (IPC ), and pilot time |
| Cockpit Ergonomics and Autopilot | Open or enclosed panel with recognizable controls, autopilot optional | Realistic switch reach, adjustable fixed seat, and 2-axis autopilot/FD if standard |
| Instructor Station | Setup interface with pause, track playback, and live failure injection | Separate real-time station showing airways, NAVAIDs, speed, altitude, plus automated ATC or SBT |
| Prohibited Uses | Checkrides, type ratings, solo, night, cross-country, landings, and Commercial/ATP/IPC | Checkrides, type ratings, type-specific training, solo, night, cross-country, and landings |
How to log pilot simulator training time and pass a checkride audit
Improperly logged simulator hours can cause FAA Form 8710-1 rejections before a practical test begins. Designated Pilot Examiners (DPEs) are instructed to request a copy of the FAA Letter of Authorization from applicants crediting ATD hours toward certificate or rating minimums.
Follow this 7-step verification checklist, written by our team from FAA ATD logging guidance, before counting BATD or AATD sessions toward any FAA requirement.
- Step 1, Inspect the 3 station documents: Confirm a current FAA LOA, the approved QAG (with gross-weight performance charts at sea level and 6,000 feet MSL), and aircraft configuration data accompany the trainer in print or electronically.
- Step 2, Check the 5-year LOA expiration: Verify the LOA was issued by the FAA General Aviation and Commercial Division and is unexpired, since legacy PCATD, FTD Levels 1 to 3, and undated ATD letters terminated on December 31, 2015 under Federal Register Docket No. FAA-2013-0809.
- Step 3, Confirm Part 141 TCO approval: If enrolled under Part 141, verify the school's Flight Standards District Office Principal Operations Inspector approved the ATD in the Training Course Outline.
- Step 4, Observe the startup self-test: Have your authorized instructor observe the automatic startup control-response self-test, confirm no non-evaluated software is running, and stop accredited instruction if any malfunction occurs.
- Step 5, Leave Flight Time columns blank: Log ATD sessions only under Instruction Received (Dual), BATD or AATD time, and Total Time, matching FAA Form 8710-1.
- Step 6, Log Simulated Instrument only in IMC: Record Simulated Instrument Time strictly during segments when visuals are set to IMC and you fly solely by reference to instruments.
- Step 7, Record the LOA device ID: Enter the exact ATD type and identification per 14 CFR 61.51(b)(1)(iv), obtain your instructor's endorsement, and keep a copy of the LOA in your checkride folder.
Worked Example: Compliant vs Disqualifying 1.5-Hour AATD Logbook Entry (Written by our team)
| Logbook Field | Compliant Entry (1.2 Hours IMC + 0.3 Hours VFR Setup ) | Checkride-Failing Error |
|---|---|---|
| Device Make, Model, and ID | Exact AATD make, model, and ID printed on the FAA LOA | Writing C172S or Sim without the LOA identification |
| Airplane SEL / Flight Time | Blank (0.0 ) | Entering 1.5 hours in Airplane SEL or Flight Time |
| BATD / AATD Column | 1.5 hours AATD | Leaving the training device column blank |
| Simulated Instrument | 1.2 hours (only the IMC period flown by instruments ) | Logging all 1.5 hours including VFR setup and vectoring |
| Dual Received and Total Time | 1.5 hours Dual and 1.5 hours Total, signed by CFI with LOA saved | Crediting unsupervised solo practice toward dual minimums |
Part 60 FTDs and Full Flight Simulators for airline training
Multi-crew jet and airline pilot flight simulator training moves under 14 CFR Part 60, covering Flight Training Devices at Levels 4, 5, 6, and 7 and Full Flight Simulators at Levels A, B, C, and D. Unlike a factory ATD approval, each Part 60 device is evaluated on site by the FAA National Simulator Program Branch for a Statement of Qualification and maintained by a certificate-holding sponsor under a Simulation Quality Management System (SQMS).
The NSP enforces legally binding FSTD Directives to protect training fidelity. FSTD Directive 1 (effective May 30, 2010) governs Class II and Class III visual airport models, while FSTD Directive 2 (effective May 31, 2016) mandates aerodynamic modeling for full stall, Upset Prevention and Recovery Training (UPRT), engine and airframe icing, gusting crosswinds, and bounced landing recovery. By our count from the FAA National Simulator Program portal (updated June 8, 2026), the FAA maintains 27 active FSTD Information Bulletins guiding Part 60 evaluations, including 5 supporting FSTD Directive 2 and Bulletin 26-01 (revised June 5, 2026) on Extended Reality (XR) systems. Additional bulletins cover Surface Movement Guidance and Control System (SMGCS) low-visibility taxi, Runway Status Lights, Land and Hold Short Operations, RNP AR, windshear, Head-Up Displays, Enhanced Flight Vision Systems, and Night Vision Goggles.
To prevent duplicate international inspections, the FAA NSP maintains active Bilateral Aviation Safety Agreement Simulator Implementation Procedures (BASA-SIP) with Canada, the United Kingdom, and the European Union. Under two EU-US BASA Annexes signed November 19, 2020, EASA and the FAA reciprocally accept recurrent evaluation findings and documentation for EU- and US-based full flight simulators.
EASA FSTD Capability Signature, Virtual Reality, and XR rules
For European training and international license conversions, EASA is shifting from fixed simulator tiers to a capability-based framework. On July 15, 2026, EASA published CS-FSTD Issue 1 (ED Decision 2026/008/R) alongside Commission Implementing Regulation (EU) 2026/781, amending Regulations (EU) No 1178/2011 and (EU) No 965/2012. Until the new rules take effect on April 30, 2028, CS-FSTD(A) Issue 2 for airplanes (May 3, 2018) and CS-FSTD(H) for helicopters (July 4, 2012) remain applicable.
At the core of the European reform is the FSTD Capability Signature (FCS), implementing elements of ICAO Doc 9625 by grading each simulator across standardized features and fidelity levels. Paired with an optional task-to-tool methodology, Approved Training Organisations (ATOs) and Air Operator Certificate (AOC) holders can match specific airplane or helicopter type-rating and recurrent training tasks to the required simulator fidelity.
Both regulators now provide qualification pathways for Virtual Reality (VR), Extended Reality (XR), and touchscreen cockpits. EASA's modernized framework establishes standards for touchscreens and XR, building on EASA Special Conditions applied to qualify helicopter FNPT Level II and FTD Level 3 trainers combining VR Head Mounted Displays with reduced-stroke motion (which do not automatically transfer to non-motion or other aircraft setups), while FAA NSP Bulletin 26-01 governs Part 60 XR qualification. Always verify an explicit qualification certificate or LOA covers your exact VR or XR hardware before logging credit.
Practice example
You logged AATD simulator hours toward your Instrument Rating. Walk me through how you verified the device was legal for credit and how you recorded those hours in your logbook and on FAA Form 8710-1.
Example answer, written by us. It is not a real applicant's story. Before my first simulator lesson, my instructor and I checked the station binder for the three required documents under AC 61-136B: an unexpired 5-year Letter of Authorization from the FAA General Aviation and Commercial Division, the approved Qualification and Approval Guide matching our physical panel, and the represented aircraft performance charts. Before each session, my instructor observed the automatic startup self-test to verify zero control lag and confirm only the FAA-evaluated software was running. In my logbook, I entered the exact device make, model, and identification from the Letter of Authorization under 14 CFR 61.51, logging the session under Dual Instruction Received, AATD time, and Total Time while leaving every Flight Time column blank. I logged Simulated Instrument Time only when the visuals were set to IMC, and I brought a copy of the Letter of Authorization to my checkride.
Interviewers audit logbooks carefully to confirm simulator hours were never mixed into airplane flight time columns. Naming the 5-year Letter of Authorization, startup self-test, IMC visual rule, and blank flight-time columns shows disciplined compliance with 14 CFR 61.51 and FAA ATD rules.
Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview
Frequently asked questions
Can I log Microsoft Flight Simulator hours in my pilot logbook?
No. Simulator hours only count when flown on a complete hardware and software station holding an active FAA Letter of Authorization or Part 60 qualification, equipped with aircraft-style physical controls, and supervised by an authorized instructor.
Can an Aviation Training Device (ATD) be used for an FAA checkride or type rating?
No. BATDs and AATDs cannot be used for practical tests, aircraft-type-specific training, or an aircraft type rating, which require either an aircraft or an appropriately qualified 14 CFR Part 60 simulator.
How do I log BATD or AATD simulator time without failing a logbook check?
Record the exact ATD type and identification from the Letter of Authorization per 14 CFR 61.51(b)(1)(iv), enter the duration under Dual Instruction Received, BATD or AATD time, and Total Time, and leave all Flight Time columns blank. Log Simulated Instrument Time only when the visuals are set to IMC and you fly solely by reference to instruments.
Can solo, night, cross-country, or landing requirements be completed in an ATD?
No. Solo, night, cross-country, and takeoff and landing certification requirements cannot be accomplished in an ATD, and the 3 hours of instrument maneuvering for a Private Pilot certificate under 14 CFR 61.109(a)(3) must be flown in a single-engine airplane.
When do EASA's new FSTD Capability Signature and XR simulator rules take effect?
Commission Implementing Regulation (EU) 2026/781 and CS-FSTD Issue 1, introducing the capability-based FSTD Capability Signature (FCS), task-to-tool training selection, and Extended Reality (XR) qualification standards, become applicable on April 30, 2028.
Sources
- FAA Advisory Circular 61-136B: FAA Approval of Aviation Training Devices and Their Use for Training and Experience
- FAA National Simulator Program (NSP )
- eCFR Title 14 Section 141.41: Full Flight Simulators, Flight Training Devices, Aviation Training Devices, and Training Aids
- EASA Flight Simulation Training Devices (FSTD )
- EASA Press Release: EASA Modernises Flight Simulation Training Devices Rules