SkyWest First Officer Qualifications and Part 121 Prep Guide

Short answer: To fly as a First Officer (second in command) for a Part 121 air carrier when your goal is SkyWest Airlines, federal regulations under 14 CFR 121.436 require you to hold an Airline Transport Pilot (ATP) certificate or Restricted Privileges ATP (R-ATP) certificate and an aircraft type rating for the aircraft flown. Under 14 CFR 61.159 and 14 CFR 61.160, you need 1,500 total flight hours for an unrestricted ATP at age 23, or between 750 and 1,500 hours at age 21 if you qualify for an R-ATP through military pilot training or an FAA-authorized aviation degree program. Before taking the multiengine ATP knowledge test, 14 CFR 61.156 requires completing an Airline Transport Pilot Certification Training Program (ATP CTP) with 30 academic hours and 10 simulator hours.

Federal Regulatory Requirements for Part 121 First Officers

If your goal is to fly as a SkyWest First Officer, your baseline qualifications are established by federal aviation regulations. According to the Federal Aviation Administration (FAA), the SkyWest Certificate Management Office (CMO) in Salt Lake City, Utah, oversees the SkyWest Airlines Inc. Air Carrier Certificate for domestic and international flight operations, maintenance, and aircrew training. Every prospective First Officer must satisfy the regulatory standards in Title 14 of the Code of Federal Regulations (14 CFR), current as of November 9, 2026.

Under 14 CFR 121.436(b), no air carrier may use a pilot, and no pilot may act as second in command (SIC) in Part 121 operations, without holding an Airline Transport Pilot certificate and an appropriate aircraft type rating for the aircraft flown. The rule states that a second-in-command type rating obtained under 14 CFR 61.55 does not satisfy Part 121 requirements. Candidates earn the full type rating during approved initial new-hire training under 14 CFR 61.157(c).

General eligibility under 14 CFR 61.153 requires you to read, speak, write, and understand English, be of good moral character, and hold a Commercial Pilot Certificate with an instrument rating or meet military equivalents. You must be at least 23 years old for an unrestricted ATP under 14 CFR 61.159, or at least 21 years old for a Restricted Privileges ATP under 14 CFR 61.160.

For medical certification, the FAA Final Rule on Pilot Certification and Qualification Requirements for Air Carrier Operations (78 FR 42324) amended 14 CFR 61.23 so that pilots exercising Part 121 SIC privileges in two-pilot domestic operations may hold a second-class medical certificate, renewing every 12 months. However, the rule notes that Part 121 First Officers flying international routes must obtain an FAA first-class medical certificate to satisfy International Civil Aviation Organization (ICAO) electrocardiography (EKG) standards.

  • Pilot Certificate: Unrestricted ATP or Restricted Privileges ATP (R-ATP) with airplane multiengine rating under 14 CFR 121.436(b) and 14 CFR 61.160.
  • Aircraft Type Rating: Appropriate type rating for the aircraft flown under 14 CFR 121.436(b). A 14 CFR 61.55 SIC type rating does not qualify.
  • Prerequisites: Commercial Pilot Certificate with an instrument rating or military equivalent under 14 CFR 61.73 per 14 CFR 61.153(d).
  • Minimum Age: 21 years old for R-ATP under 14 CFR 61.153(a)(2), or 23 years old for unrestricted ATP under 14 CFR 61.153(a)(1).
  • Medical Certificate: At least a second-class medical certificate for domestic two-pilot Part 121 SIC duties, or a first-class medical certificate for international flights under ICAO standards (78 FR 42324).

Unrestricted ATP Flight Hour Breakdown (14 CFR 61.159)

Applying for an unrestricted Airline Transport Pilot certificate with an airplane multiengine rating requires meeting the aeronautical experience minimums in 14 CFR 61.159(a). This standard mandates at least 1,500 hours of total pilot time along with specific cross-country, night, multiengine, instrument, and pilot-in-command (PIC) minimums.

Specific crediting rules in 14 CFR 61.159 apply to simulator time and night landings. For the 50-hour multiengine requirement, you may credit up to 25 hours from an approved full flight simulator (FFS) representing a multiengine airplane in an approved Part 121, 135, 141, or 142 course. By our calculation from 14 CFR 61.159(a)(3), using the maximum 25-hour simulator credit leaves a minimum of 25 hours that must be flown in an actual multiengine airplane. Flight training devices (FTD) and aviation training devices (ATD) cannot be used toward these 50 hours.

For night time, 14 CFR 61.159(a)(2) requires 100 hours. Under 14 CFR 61.159(b), after logging at least 20 night takeoffs and landings to a full stop, you can substitute each additional night full-stop takeoff and landing for 1 hour of night flight time, up to 25 hours credit. By our calculation from 14 CFR 61.159(a)(2) and (b), a pilot with 45 night full-stop landings needs only 75 hours of actual night flight time.

Across your 1,500 total hours, 14 CFR 61.159(a)(6) caps simulator and FTD credit at 100 hours total, which must be completed in an approved Part 121, 135, 141, or 142 training course.

Unrestricted ATP Aeronautical Experience Minimums (14 CFR 61.159)

Experience Category Minimum Hours Required Allowed Credits and Substitutions
Total Time as a Pilot 1,500 hours Max 100 hours in an airplane FFS or FTD in an approved Part 121, 135, 141, or 142 course
Cross-Country Flight Time 500 hours Point-to-point cross-country per 14 CFR 61.1, reduced to 200 hours for R-ATP under 14 CFR 61.160
Night Flight Time 100 hours After 20 night full-stop landings, each extra full-stop landing counts as 1 hour (max 25 hours credit)
Multiengine Airplane Class 50 hours Max 25 hours in an airplane FFS in an approved course (no FTD or ATD credit allowed)
Instrument Flight Time 75 hours Max 25 hours in an airplane FFS or FTD (or max 50 hours if completed in a Part 142 course)
Airplane PIC (or Supervised SIC) 250 hours Must include at least 100 hours of PIC cross-country and 25 hours of PIC night flight time

Restricted Privileges ATP (R-ATP) Pathways and Hour Tiers

Under 14 CFR 61.160, pilots who are at least 21 years old can qualify for a Restricted Privileges ATP (R-ATP) certificate with reduced total flight hours and reduced cross-country time. An R-ATP certificate bears the limitation 'Restricted in accordance with 14 CFR 61.167.' This restriction prohibits serving as pilot in command in Part 121 operations or serving as second in command in operations requiring three or more pilots, while authorizing full service as a First Officer in standard two-pilot Part 121 operations.

To use the 1,000-hour or 1,250-hour collegiate options, your college or university must hold an FAA Letter of Authorization (LOA) under 14 CFR 61.169, listed on the FAA Institutional Authority List (revised September 15, 2026). You must complete your commercial and instrument ground training under an approved Part 141 curriculum at that institution, and complete required flight training through that school or an affiliated Part 141 school under a training agreement. You must present certifying documentation from the institution confirming compliance with 14 CFR 61.160 at your practical test.

Restricted Privileges ATP (R-ATP) Eligibility Tiers (14 CFR 61.160)

R-ATP Pathway Minimum Age Total Time Required Cross-Country Required Specific Qualification Criteria
U.S. Military Pilot (14 CFR 61.160(a)) 21 years 750 hours 200 hours Form DD-214 showing honorable discharge or active duty record, plus official U.S. Armed Forces undergraduate pilot training graduation record
Aviation Bachelor's Degree, 60 Credits (14 CFR 61.160(b)) 21 years 1,000 hours 200 hours Bachelor's degree with aviation major from an LOA-authorized institution, 60 semester credits of FAA-recognized aviation coursework, and Part 141 training
Aviation Degree, 30 Credits (14 CFR 61.160(c)-(d)) 21 years 1,250 hours 200 hours Associate's or bachelor's degree with aviation major from an authorized institution, at least 30 semester credits of FAA-recognized aviation coursework, and Part 141 training
Age 21 to 22 with 1,500 Hours (14 CFR 61.160(f)) 21 years 1,500 hours 200 hours At least 21 years old with 1,500 hours total pilot time, 200 hours cross-country, and all other 14 CFR 61.159 experience minimums

Worked Example: Auditing Your Logbook for R-ATP Eligibility

Hitting 1,000 or 1,500 total hours does not guarantee that you satisfy Part 121 aeronautical experience minimums. Review this step-by-step audit using 14 CFR 61.159 and 14 CFR 61.160 to check your sub-column numbers before applying.

Suppose you are a 22-year-old instructor who graduated from an FAA-authorized institution with a Bachelor of Science in Professional Flight, 60 approved aviation credits, and Part 141 commercial and instrument certificates. Under 14 CFR 61.160(b), your target total time is 1,000 hours and your cross-country requirement is 200 hours. Your logbook shows 960 hours total time, 240 hours cross-country time, 82 hours night time (with 42 logged night full-stop landings), 80 hours instrument time (including 20 hours in an approved airplane FTD), 32 hours multiengine airplane time, and 780 hours airplane PIC time (with 190 hours PIC cross-country and 19 hours PIC night).

Your audit proceeds through the following calculations:

Total time sits at 960 hours against the 1,000-hour requirement, leaving 40 hours to fly. Your 240 cross-country hours exceed the 200-hour R-ATP threshold, and your 80 instrument hours (with 20 FTD hours, below the 25-hour cap) exceed the 75-hour minimum. For night time, you have 82 actual hours plus 42 full-stop night landings. Under 14 CFR 61.159(b), each full-stop night landing beyond 20 substitutes for 1 night hour up to 25 hours. Your 22 extra landings provide 22 hours of credit, raising your night total to 104 hours and clearing the 100-hour requirement.

Two areas require careful planning: multiengine class time and PIC night time. Under 14 CFR 61.159(a)(3), you need 50 multiengine hours. You have 32 in aircraft. Because up to 25 hours can be credited from an FFS in an approved Part 121, 135, 141, or 142 course, your ATP CTP simulator time (6 hours Level C or higher FFS) and Part 121 initial type-rating simulator sessions will satisfy the remaining 18 hours. However, under 14 CFR 61.159(a)(5)(i)(B), your 250 airplane PIC hours must include at least 25 hours of PIC night flight time. The landing substitution in paragraph (b) applies only to general night flight time, not to PIC night hours. With 19 hours of PIC night time logged, you must fly at least 6 of your remaining 40 hours as PIC at night in an airplane.

The ATP Certification Training Program (ATP CTP) Under 14 CFR 61.156

Before taking the multiengine Airline Transport Pilot knowledge test, 14 CFR 61.153(e) and 14 CFR 61.156 require you to present a graduation certificate from an authorized training provider under Part 121, 135, 141, or 142 certifying completion of an FAA-approved Airline Transport Pilot Certification Training Program (ATP CTP).

As outlined in 78 FR 42324, the FAA established the ATP CTP to bridge the gap between commercial pilot training and the demands of operating high-performance turbine aircraft in air carrier environments. The course requires 40 total instruction hours: at least 30 hours of academic classroom instruction and at least 10 hours in a flight simulation training device (FSTD) qualified under Part 60 representing a multiengine turbine airplane.

The curriculum in 14 CFR 61.156 covers the core technical subjects evaluated in airline interviews: high-altitude aerodynamics, low-energy states, stall and upset recovery, transport-category performance, minimum equipment lists (MEL), and crew resource management (CRM).

  • Aerodynamics and High-Altitude Operations (at least 8 hours): High-altitude handling, Mach effects, compressibility, and performance envelopes (14 CFR 61.156(a)(1)).
  • Meteorology and Weather Detection (at least 2 hours): Adverse weather, icing, windshear, microbursts, and radar systems (14 CFR 61.156(a)(2)).
  • Air Carrier Operations (at least 14 hours): High-altitude physiology, communications, checklist discipline, operational control, MEL and CDL procedures, ground operations, turbine engines, transport aircraft performance, and automation systems (14 CFR 61.156(a)(3)).
  • Leadership and Crew Resource Management (at least 6 hours): Professional development, crew coordination, first officer assertiveness, and safety culture (14 CFR 61.156(a)(4)).
  • Full Flight Simulator Training (at least 6 FSTD hours): Conducted in a Level C or higher FFS representing a multiengine turbine airplane with a maximum takeoff weight of 40,000 pounds or greater, covering low-energy states, stall events, upset recovery, and adverse weather (14 CFR 61.156(b)(1)).
  • Flight Training Device Training (up to 4 remaining FSTD hours): Completed in a Level 4 or higher FSTD covering flight management systems (FMS) navigation and autoflight automation (14 CFR 61.156(b)(2)).

Checklist: Pre-Interview Verification and Preparation Plan

Preparing for a First Officer interview requires verifying your paperwork under 14 CFR Part 61 and practicing how you present technical concepts and operational decisions. Use this checklist written by our team to organize your preparation.

  • Verify your collegiate institution and degree major on the official FAA Institutional Authority List (revised September 15, 2026) if applying under the 1,000-hour or 1,250-hour R-ATP tiers in 14 CFR 61.160.
  • Confirm that your official college transcript includes the FAA certifying statement under Advisory Circular 61-139, or secure the official certifying document from your university aviation department.
  • Assemble official Form DD-214 showing honorable discharge (or active duty documentation) and undergraduate pilot training graduation records if qualifying under 14 CFR 61.160(a).
  • Audit your airplane PIC sub-columns under 14 CFR 61.159(a)(5) to ensure at least 250 hours of airplane PIC time, including 100 hours of cross-country PIC and 25 hours of night PIC.
  • Separate your simulator and FTD time from actual aircraft time to prove compliance with the 25-hour instrument simulator cap in 14 CFR 61.159(a)(4) and the 100-hour total simulator limit in 14 CFR 61.159(a)(6).
  • Check your medical certificate validity under 14 CFR 61.23 and confirm whether your target carrier expects an unexpired first-class medical certificate for international routes.
  • Practice explaining core aeronautical knowledge areas out loud from 14 CFR 61.155(c) and 14 CFR 61.156(a), focusing on high-altitude aerodynamics, MEL procedures, weather radar, and transport performance.
  • Structure concise, first-person flight examples illustrating aeronautical decision-making, stabilized approaches, and monitoring assertiveness.

Crediting Non-Airplane Time, Part 135 PDP, and Flight Engineer Hours

Pilots transitioning from helicopters, gliders, Part 135 operations, or military flight engineer duties must observe the distinction in 14 CFR 61.159 between total time as a pilot and flight time in an airplane.

Under 14 CFR 61.159(a), your total pilot time can include time logged in other aircraft categories such as rotorcraft. However, 14 CFR 61.159(a)(3) specifically mandates 50 hours of flight time in the multiengine airplane class, and 14 CFR 61.159(a)(5) requires 250 hours of flight time in an airplane as pilot in command (or supervised SIC performing PIC duties), including 100 hours of cross-country and 25 hours of night. Qualifying military pilots who meet 14 CFR 61.73 may credit powered-lift time operated in horizontal flight toward the 250-hour airplane PIC requirement under 14 CFR 61.159(a)(5)(ii).

Commercial pilots flying under an approved Part 135 Second-in-Command Professional Development Program (SIC PDP) under 14 CFR 135.99 and 14 CFR 61.159(c) can log SIC time toward total time. The PIC must certify the time in your logbook. This time cannot be logged as PIC time or counted toward the 250-hour airplane PIC requirement.

Under 14 CFR 61.159(d), commercial pilots who served as flight engineers in Part 121 operations or military operations may credit 1 hour of pilot time for every 3 hours of flight engineer time, up to 500 hours maximum. Under 14 CFR 61.159(e), using night landing substitutions, SIC PDP hours, or flight engineer time places an ICAO PIC limitation on your ATP certificate until you satisfy ICAO requirements without those credits.

Upgrading from First Officer to Captain Under 14 CFR 121.436

Federal regulations establish specific requirements to progress from First Officer to Captain. To remove the restricted limitation from an R-ATP certificate, 14 CFR 61.160(g) requires reaching age 23 and presenting evidence of meeting the full 1,500-hour total time and 500-hour cross-country requirements of 14 CFR 61.159.

To upgrade to Captain under 14 CFR 121.436(a), you must hold an unrestricted ATP certificate, an aircraft type rating, and at least 1,000 hours of qualifying air carrier or multi-crew operational experience.

Under 14 CFR 121.436(a)(3) and (c), these 1,000 hours can be accrued as Second in Command in Part 121 operations, as Pilot in Command under 14 CFR 91.1053(a)(2)(i), 14 CFR 135.243(a)(1), or eligible on-demand operations under 14 CFR 135.4(a)(2)(ii)(A). Military pilots may credit up to 500 hours of military PIC time flown in multiengine, turbine-powered fixed-wing airplanes or powered-lift aircraft in operations requiring more than one pilot.

Practice example

Tell me about a time you were flying with another pilot or instructor and noticed an unstabilized approach or a deviation from standard procedures. How did you handle it?

Example answer written by our team. The applicant is invented. Last winter, I was flying in the right seat of a multiengine trainer on a practice instrument approach in gusty crosswinds with a senior check instructor in the left seat. Passing 800 feet above the runway, our airspeed crept 12 knots above our target approach speed and our sink rate exceeded 1,000 feet per minute as we chased the glideslope. Under our flight school standard operating procedures, we were required to be fully stabilized by 500 feet above touchdown. At 600 feet, I made a clear callout of airspeed and sink rate. When the descent rate stayed high passing 500 feet, I called for a go-around. We executed the missed approach, climbed to pattern altitude, and briefed the wind gradient before setting up for a second approach, which we landed safely on speed. That flight reinforced that effective crew resource management and monitoring duties mean speaking up with clear numbers first, and calling an immediate go-around whenever stabilization gates are exceeded.

This answer uses a specific cockpit situation with clear numbers and altitude gates rather than speaking in generalities. It directly demonstrates pilot monitoring skills, stabilized approach discipline, and first officer assertiveness, which are core competencies highlighted in the FAA Part 121 qualification rules.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

What pilot certificate is legally required to fly as a Part 121 First Officer?

Under 14 CFR 121.436(b), a pilot serving as second in command in Part 121 air carrier operations must hold an Airline Transport Pilot certificate or Restricted Privileges ATP certificate and an appropriate type rating for the aircraft flown. A second-in-command type rating issued under 14 CFR 61.55 does not satisfy this requirement.

How many flight hours do you need for a Restricted ATP (R-ATP)?

Under 14 CFR 61.160, pilots at least 21 years old need 750 total hours as a qualified U.S. military pilot, 1,000 hours with an approved 60-credit aviation bachelor's degree, 1,250 hours with an approved 30-credit aviation degree, or 1,500 hours at age 21 to 22. All R-ATP options reduce required cross-country time from 500 hours to 200 hours.

What does the ATP CTP course include before the ATP written exam?

Under 14 CFR 61.156, the ATP CTP requires at least 30 hours of academic classroom instruction and 10 hours in flight simulation training devices representing a multiengine turbine airplane. The simulator portion includes at least 6 hours in a Level C or higher full flight simulator and up to 4 hours in a Level 4 or higher device.

Can you count helicopter or simulator hours toward the 1,500-hour ATP requirement?

Yes. Under 14 CFR 61.159(a), rotorcraft hours count toward the 1,500 hours of total pilot time, provided you meet specific airplane minimums including 250 hours of airplane PIC time and 50 hours in multiengine airplanes. Up to 100 hours of total time and up to 25 hours of multiengine class time can be credited from an approved full flight simulator.

How many hours does a Part 121 First Officer need to upgrade to Captain?

Under 14 CFR 121.436(a)(3), you must hold an unrestricted ATP certificate and log at least 1,000 hours as a Part 121 SIC, qualifying Part 135 PIC, or fractional PIC. Military pilots can credit up to 500 hours of multi-pilot, multiengine turbine military PIC time toward this requirement.

Sources