SkyWest Pilot Application: FAA Qualifications, Flight Hours, and PRD Guide
Short answer: Preparing a SkyWest pilot application or applying to any Part 121 air carrier requires meeting the Airline Transport Pilot (ATP) minimums in 14 CFR 61.159 (1,500 hours total time) or Restricted ATP (R-ATP) minimums in 14 CFR 61.160 (750 to 1,250 hours), plus granting carrier access to your FAA Pilot Records Database (PRD) file under 14 CFR Part 111. Under 14 CFR 121.436, no pilot may act as second in command in Part 121 operations without an ATP certificate and an appropriate aircraft type rating.
FAA Part 121 baseline qualifications for your application
When you prepare a SkyWest pilot application or apply to any Part 121 regional or mainline carrier, federal regulations set the baseline qualifications you must meet before you can begin flight service. Under 14 CFR 121.436, no certificate holder may use a pilot as second in command unless that pilot holds an Airline Transport Pilot (ATP) certificate and an appropriate aircraft type rating for the aircraft being flown. A second-in-command type rating obtained under 14 CFR 61.55 does not satisfy Part 121 requirements.
General eligibility for an ATP certificate is governed by 14 CFR 61.153. To qualify for an unrestricted ATP certificate under the standard aeronautical experience rules of 14 CFR 61.159, you must be at least 23 years old. If you are applying for a restricted privileges ATP (R-ATP) certificate under 14 CFR 61.160, you must be at least 21 years old.
Beyond age, 14 CFR 61.153 requires every ATP applicant to be of good moral character and to read, speak, write, and understand the English language. You must also meet at least one of three baseline credential paths before applying for the ATP practical test:
- Hold an FAA commercial pilot certificate with an instrument rating issued under 14 CFR Part 61.
- Meet the military experience requirements under 14 CFR 61.73 to qualify for a commercial pilot certificate and an instrument rating as a rated or former rated U.S. Armed Forces military pilot.
- Hold a foreign ATP license with instrument privileges or a foreign commercial pilot license with an instrument rating issued by an International Civil Aviation Organization (ICAO) contracting State with no geographical limitations.
ATP and R-ATP flight hour minimums (14 CFR 61.159 and 61.160)
Your logbook audit is the centerpiece of a Part 121 pilot application. Under 14 CFR 61.159(a), the standard aeronautical experience for an airplane category ATP certificate is at least 1,500 hours of total time as a pilot. However, 14 CFR 61.160 allows eligible military pilots and graduates of FAA-authorized aviation degree programs to obtain a restricted privileges ATP certificate with fewer total hours and reduced cross-country time.
A restricted privileges ATP certificate issued under 14 CFR 61.160 carries the limitation 'Restricted in accordance with 14 CFR 61.167.' As the FAA Pilot Training guidance notes, a restricted privileges ATP certificate allows a pilot to serve as a co-pilot (second in command) in Part 121 operations until obtaining the 1,500 hours and age 23 requirement needed to remove the restriction.
By our calculation from 14 CFR 61.159 and 14 CFR 61.160, a military pilot qualifying at 750 hours completes 50 percent of the standard 1,500-hour total time requirement, while a bachelor's degree graduate qualifying at 1,000 hours completes 66.7 percent, and every R-ATP tier reduces the required cross-country time by 300 hours (from 500 hours down to 200 hours).
FAA ATP and Restricted ATP Aeronautical Experience Tiers (14 CFR 61.153, 61.159, and 61.160, current as of November 2026)
| Qualification Path | Minimum Age | Total Pilot Time | Cross-Country Time | Key Eligibility Requirement (14 CFR 61.159 / 61.160) |
|---|---|---|---|---|
| Unrestricted ATP (61.159) | 23 years | 1,500 hours | 500 hours | Standard aeronautical experience under 14 CFR 61.159(a) |
| R-ATP: Standard Hours (61.160(f)) | 21 years | 1,500 hours | 200 hours | Meets all other 14 CFR 61.159 aeronautical experience requirements |
| R-ATP: Associate Degree or 30 Credits (61.160(c)-(d)) | 21 years | 1,250 hours | 200 hours | Associate degree with aviation major (or Bachelor's graduate with 30 to 59 credits), at least 30 semester credit hours of recognized aviation coursework, and Part 141 commercial/instrument ground and flight training at an FAA-authorized institution |
| R-ATP: Bachelor's Degree (61.160(b)) | 21 years | 1,000 hours | 200 hours | Bachelor's degree with aviation major, 60 semester credit hours of recognized aviation coursework, and Part 141 commercial/instrument ground and flight training at an FAA-authorized institution |
| R-ATP: U.S. Military Pilot (61.160(a)) | 21 years | 750 hours | 200 hours | DD-214 showing honorable discharge (or record of current service) and official record of graduation from a U.S. Armed Forces undergraduate pilot training school as a rated military pilot |
Sub-minimum flight hours and simulator credit rules
Meeting the headline total time of 750, 1,000, 1,250, or 1,500 hours is only step one of verifying your application numbers. Under 14 CFR 61.160(e), every R-ATP applicant must still satisfy the specific sub-minimum flight hour categories listed in 14 CFR 61.159(a), with the sole exception that total cross-country time is reduced from 500 hours to 200 hours.
Before you submit an application, audit your logbooks against each specific category required by 14 CFR 61.159(a) and (b):
- Cross-country time: At least 500 hours for an unrestricted ATP under 14 CFR 61.159(a)(1), or at least 200 hours for an R-ATP under 14 CFR 61.160(e) and (f).
- Night flight time: At least 100 hours under 14 CFR 61.159(a)(2). Under 14 CFR 61.159(b), if you have performed at least 20 night takeoffs and landings to a full stop, you may substitute each additional night takeoff and landing to a full stop for 1 hour of night flight time, up to a maximum credit of 25 hours.
- Class of airplane (Multiengine): At least 50 hours of flight time in the class of airplane for the rating sought under 14 CFR 61.159(a)(3). You may credit a maximum of 25 hours of training in a full flight simulator representing that class of airplane if completed as part of an approved training course under Part 121, 135, 141, or 142. A flight training device (FTD) or aviation training device (ATD) cannot be used toward this 50-hour requirement.
- Instrument flight time: At least 75 hours in actual or simulated instrument conditions under 14 CFR 61.159(a)(4). You may credit a maximum of 25 hours of simulated instrument time in a full flight simulator or FTD representating an airplane, or up to 50 hours if the training was accomplished in a course conducted by a Part 142 certificated training center.
- Pilot in Command (PIC) airplane time: At least 250 hours of flight time in an airplane as PIC, or as second in command (SIC) performing the duties of PIC under the supervision of a PIC, or any combination thereof, under 14 CFR 61.159(a)(5). This 250-hour block must include at least 100 hours of cross-country time and at least 25 hours of night flight time.
- Total simulator cap: Under 14 CFR 61.159(a)(6), no more than 100 hours of the total aeronautical experience required by 14 CFR 61.159(a) or 61.160 may be obtained in a full flight simulator or FTD representing an airplane within an approved Part 121, 135, 141, or 142 course.
Worked logbook audit example for a Part 121 application
To see how an airline application review evaluates your hours against federal regulations, consider an invented applicant: a 22-year-old flight instructor who graduated from an FAA-authorized Part 141 university with a bachelor's degree in aviation and 60 qualifying semester credits. Here is how our team audits this pilot's logbook against 14 CFR 61.160(b) and 61.159(a):
-
Total Time and Degree Check: The applicant has 1,015 hours of total pilot time, including 85 hours in a Frasca FTD from an approved Part 141 course. Because 14 CFR 61.159(a)(6) allows up to 100 hours of simulator or FTD time from an approved Part 141 course toward total aeronautical experience, all 85 hours count. At 1,015 hours with a qualifying degree, official transcripts, and an FAA certifying statement, the pilot meets the 1,000-hour R-ATP threshold.
-
Multiengine Class Check: The applicant has 30 hours in a multiengine airplane and 15 hours in a multiengine FTD from Part 141 training. Under 14 CFR 61.159(a)(3), up to 25 hours in a full flight simulator (FFS) can count toward the 50-hour class requirement, but FTDs and ATDs cannot be used. This pilot has only 30 qualifying multiengine hours and is 20 hours short of the 50-hour requirement.
-
Night Flight Check: The applicant has logged 82 hours of night flight time and 45 full-stop night takeoffs and landings. Under 14 CFR 61.159(b), having passed the 20-landing threshold, the pilot can credit the 25 additional night full-stop takeoffs and landings for 25 hours of night time. That brings the credited night total to 107 hours, satisfying the 100-hour rule (note that using 14 CFR 61.159(b) adds an ICAO limitation under 14 CFR 61.159(e) until standard ICAO experience is met).
-
PIC Sub-Minimum Check: The applicant has 420 hours of airplane PIC time, including 115 hours of PIC cross-country time, but only 19 hours of PIC night time. Under 14 CFR 61.159(a)(5)(i)(B), the 250-hour airplane PIC requirement must include at least 25 hours of night flight time. Even though the pilot satisfied the overall 100-hour night requirement using landing credits, the pilot still needs 6 hours of actual airplane PIC night flight time to qualify.
ATP Certification Training Program (ATP CTP) rules
Under 14 CFR 61.153(e), if you are applying for an ATP certificate with an airplane category multiengine class rating, or an ATP certificate obtained concurrently with a multiengine airplane type rating, you must receive a graduation certificate from an authorized training provider certifying completion of the Airline Transport Pilot Certification Training Program (ATP CTP) specified in 14 CFR 61.156 before applying for the ATP knowledge test.
As outlined on the FAA Pilot Training portal (updated June 8, 2026) and Advisory Circular 61-138, the ATP CTP is designed to prepare applicants to operate safely in operations that require an ATP certificate by rule. The FAA maintains a published list of certificate holders authorized to conduct the ATP CTP.
When you fill out an airline application, you will be asked whether you have completed the ATP CTP and passed the multiengine ATP knowledge test under 14 CFR 61.153(g). Check the official job posting or your recruiter invitation email to confirm whether the carrier sponsors the ATP CTP course after a conditional job offer or requires completion prior to interviewing.
Pilot Records Database (PRD) rules for your application
Every Part 121 air carrier is governed by 14 CFR Part 111 when evaluating pilot applicants. Under 14 CFR 111.5(b), beginning September 9, 2024, the older Pilot Records Improvement Act (PRIA) ceased to be effective and is no longer an available alternative to the electronic Pilot Records Database (PRD). Under 14 CFR 111.105(a), no reviewing entity may permit an individual to begin service as a pilot until the carrier has evaluated all relevant information in the PRD.
As an applicant seeking employment with a Part 121 operator, you have specific timeline and consent duties under Subpart D of 14 CFR Part 111 and the FAA PRD portal rules (updated October 14, 2026):
- Eligibility to register: According to the FAA PRD portal, to register for electronic pilot access you must hold a Commercial, ATP, or Remote pilot certificate and a valid FAA medical certificate. Private pilots cannot access the PRD system.
- The 7-day registration rule: Under 14 CFR 111.305(c), you must submit your application for electronic access to the PRD at least 7 days before you seek to access the PRD to review your records or grant consent to an employer.
- Required registration details: Under 14 CFR 111.305(b), your PRD access application requires your full name as it appears on your pilot certificate, your FAA-issued certificate number, a current mailing address, a telephone number, and an email address.
- Written consent and 5-year employment affirmation: Under 14 CFR 111.310(a) and (b), before an airline can view your PRD file, you must provide written consent through the PRD. That consent must include an affirmation that your pilot employment history for the 5 years preceding the date of consent is accurate and complete. If any past employers are missing, you must update your 5-year employment history in the database first.
- Account inactivity deactivation starting mid-November 2026: Per an official FAA PRD notice, starting mid-November 2026, the FAA automatically disables PRD user accounts after 365 days of inactivity. Log in at least once a year so your account is active when an airline requests consent.
What air carriers evaluate in your PRD and driving records
When you grant PRD consent during your application process, 14 CFR 111.105(b) and 111.135 specify exactly what the airline's authorized users must review before you can begin service as a pilot. Knowing what appears in your file lets you verify its accuracy before a recruiter or interview panel reads it.
First, under 14 CFR 111.135, the carrier evaluates all relevant FAA records in the PRD. These include your current pilot and medical certificate information (with associated type ratings and limitations), any failed attempt to pass a practical test (checkride) for a certificate or type rating under 14 CFR Part 61, any unoverturned FAA enforcement actions resulting in a finding of a violation, any aviation accident or incident where you acted as PIC or SIC, and DOT pre-employment or prior drug and alcohol violations (verified positive drug tests, alcohol results of 0.04 or greater, or refusals to test).
Second, under 14 CFR 111.105(b)(2) and Subpart C (14 CFR 111.220 through 111.235), the carrier reviews records reported by your previous aviation employers, including historical PRIA records dating back to August 1, 2005 for Part 121 and 135 air carriers (or August 1, 2010 for Part 125 and 91K operators) under 14 CFR 111.255. Employer records include training, qualification, and proficiency events (with check pilot comments and unsatisfactory maneuvers), final disciplinary actions pertaining to pilot performance, and final separation from employment records. Under 14 CFR 111.225(b) and 111.245, employers are prohibited from reporting flight/duty/rest time records, physical examination medical records, recent flight experience records, or protected Voluntary Safety Reporting Program (such as ASAP) reports.
Third, under 14 CFR 111.110, the air carrier must conduct a National Driver Register (NDR) search of your motor vehicle driving history. You must provide specific written consent for the NDR search under 14 CFR 111.310(c). If the NDR search indicates that state records exist, the carrier must request and evaluate the relevant motor vehicle driving records from each state identified. Under 14 CFR 111.120(c), you have the right to request a copy of any state driving records the carrier obtains, and the carrier must provide them to you within 30 days of your request.
How to dispute or correct errors in your PRD file
Never wait until the week of your airline interview to open your PRD record. Under 14 CFR 111.315(a), once you have electronic access, you may review your comprehensive PRD record at any time. If you do not have electronic access, 14 CFR 111.315(c) allows you to review your records by submitting an identity confirmation form to the FAA.
If you discover an error or inaccuracy in a record reported by a past employer, 14 CFR 111.320 and 111.250 establish a formal correction and dispute timeline. You must report the perceived error through the PRD. Once notified, the reporting employer must either correct the inaccurate record in the PRD within 10 days of identification under 14 CFR 111.250(a), or initiate a dispute investigation within 30 days if it disagrees that the record is inaccurate under 14 CFR 111.250(b)(1). Similarly, if a disciplinary action or separation record is later overturned by a documented employer-pilot agreement, arbitration panel, or court of law, the employer must remove or correct the PRD entry within 10 days of receiving notice under 14 CFR 111.230(c) and 111.235(c).
Pre-application checklist for Part 121 pilot applicants
Use this step-by-step plan written by our team to get your credentials, logbooks, and federal records ready before submitting your application:
- Step 1 (At least 30 days before applying): Register for or log into your FAA PRD account under 14 CFR 111.305. Remember the mandatory 7-day minimum lead time before you can use the system and the 365-day inactivity lock taking effect mid-November 2026.
- Step 2 (21 days before applying): Download your comprehensive PRD record under 14 CFR 111.315. Cross-check every Part 61 practical test record, certificate number, and past employer training event against your personal logbooks. If a past employer made a reporting error, trigger the 10-day correction window under 14 CFR 111.250.
- Step 3 (14 days before applying): Audit your flight hours line by line against 14 CFR 61.159(a). Verify that your 250 hours of airplane PIC time contain the full 100 hours of PIC cross-country and 25 hours of PIC night time, and confirm that no FTD or ATD hours are mixed into your 50 hours of multiengine class time.
- Step 4 (7 days before applying): Gather your supporting documents. If applying under a 1,000-hour or 1,250-hour R-ATP university pathway under 14 CFR 61.160(b)-(d), verify that your official college transcript and FAA certifying statement match your Part 141 training records. If applying under the 750-hour military rule under 14 CFR 61.160(a), locate your DD-214 (or active service record) and undergraduate pilot training graduation record.
- Step 5 (Application day): Update your 5-year employment history in the PRD, sign your electronic PRD and NDR written consents under 14 CFR 111.310 when requested by the carrier, and practice telling your own stories out loud for every training event or checkride failure shown in your file.
Practice example
When we review your FAA Pilot Records Database file, what will we see under your Part 61 practical test history, and what did you learn from any unsatisfactory event?
Example answer written by our team. The applicant is invented. When you review my PRD file, you will see one unsatisfactory practical test attempt from my Initial Commercial Pilot Airplane Single-Engine Land checkride three years ago, along with passes on my Private, Instrument, Commercial retest, Multiengine, and CFI practical tests. On that first Commercial attempt, my oral exam and slow flight maneuvers were satisfactory, but I exceeded the plus-100-foot distance tolerance on the power-off 180-degree accuracy landing. I floated past my touchdown point because I carried five knots of extra airspeed over the fence instead of trusting my sight picture and pitch attitude. That day taught me not to invent an unwritten buffer on top of published performance numbers. Before my retest five days later, I flew three practice flights focusing strictly on stabilized energy management on base and final. Now, as an instructor, I brief exact airspeed and aim-point callouts before every landing.
Under 14 CFR 111.135(b), the air carrier evaluates every failed attempt to pass a Part 61 practical test in the PRD. This answer works because the pilot states the exact checkride and maneuver up front without blaming the examiner or weather, explains the root cause, and shows how the lesson changed daily cockpit habits.
Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview
Frequently asked questions
What flight hour minimums apply to a Part 121 First Officer application?
Under 14 CFR 121.436(b), a Part 121 second in command must hold an ATP certificate and an appropriate aircraft type rating. You can qualify for an unrestricted ATP at 1,500 hours total time under 14 CFR 61.159, or a restricted privileges ATP (R-ATP) under 14 CFR 61.160 at 750 hours (military pilots), 1,000 hours (qualifying aviation bachelor's degree with 60 credits), or 1,250 hours (qualifying aviation associate degree or 30 credits).
How early must I register for the FAA Pilot Records Database (PRD) before applying?
Under 14 CFR 111.305(c), you must submit your application for electronic access to the PRD at least 7 days before you seek to access the database to review your file or grant release consent to an air carrier. In addition, starting mid-November 2026, the FAA disables PRD accounts after 365 days of inactivity.
Can I use flight training device (FTD) hours toward the 50-hour multiengine ATP requirement?
No. Under 14 CFR 61.159(a)(3), you may credit up to 25 hours of training in a full flight simulator (FFS) toward the 50-hour class requirement if completed in an approved Part 121, 135, 141, or 142 course, but a flight training device (FTD) or aviation training device (ATD) may not be used to satisfy this requirement.
What records does an airline check in the Pilot Records Database?
Under 14 CFR 111.105 and 111.135, the carrier evaluates your current FAA certificates and medical, Part 61 practical test failures, FAA enforcement actions, aviation accidents or incidents, DOT drug and alcohol violations, prior employer training and disciplinary records, your 5-year employment history, and your National Driver Register (NDR) motor vehicle driving records.
Do I need to complete the ATP CTP before taking the multiengine ATP knowledge test?
Yes. Under 14 CFR 61.153(e), applicants for an ATP certificate with an airplane category multiengine class rating or concurrent multiengine airplane type rating must present a graduation certificate from an authorized ATP Certification Training Program (ATP CTP) provider before applying for the ATP knowledge test.
Sources
- 14 CFR 121.436 Pilot Qualification: Certificates and Experience Requirements (eCFR)
- 14 CFR 61.153 Eligibility Requirements: General (eCFR)
- 14 CFR 61.159 Aeronautical Experience: Airplane Category Rating (eCFR)
- 14 CFR 61.160 Aeronautical Experience: Airplane Category Restricted Privileges (eCFR)
- 14 CFR Part 111 Pilot Records Database (eCFR)
- 14 CFR Part 111 Subpart A General (GovInfo)
- Pilot Training and ATP Certification Training Program (Federal Aviation Administration)
- Pilot Records Database Portal and Notices (Federal Aviation Administration)