Wheels Up Pilot Hiring & Interview Guide

Short answer: Pilots flying passenger operations for direct air carriers under 14 CFR Part 135 must meet strict Federal Aviation Administration qualification baselines. Under 14 CFR 135.243, serving as Pilot in Command under Instrument Flight Rules requires at least 1,200 hours of total flight time, while commanding a passenger-carrying turbojet requires an Airline Transport Pilot certificate and an appropriate aircraft type rating. For eligible on-demand two-pilot operations under 14 CFR 135.4, federal rules require at least 1,500 hours for a Pilot in Command and 500 hours for a Second in Command.

How Part 135 Direct Air Carrier Operations Work

When you apply to fly for a private aviation operator such as Wheels Up, you are applying to operate under 14 CFR Part 135 rules. According to the Wheels Up website (as of November 2026), passenger flights are arranged by Wheels Up Partners LLC, Wheels Up Private Jets LLC, or Air Partner LLC, and all flights are operated by a direct air carrier holding an Air Carrier Certificate under 14 CFR Part 119 authorizing air transportation under 14 CFR Part 121, 129, or 135. When Wheels Up Partners LLC or Wheels Up Private Jets LLC provide air transportation services directly, they act as the direct air carrier.

Wheels Up operates a fleet featuring Phenom 300 series and Challenger 300/350 aircraft, alongside a global charter network and a strategic partnership with Delta Air Lines. Upon completing company indoctrination and full-motion simulator training, pilots earn a Pilot in Command type rating for the EMB-505 or CL-30.

Because private aviation operators fly unscheduled itineraries into diverse airports, your interview preparation must cover two distinct areas. You need a sharp command of Part 135 regulations and technical procedures, and you must demonstrate a strong customer-service mindset for interacting directly with passengers.

Federal Part 135 Flight Time Minimums and Certificates

Before any private jet operator evaluates your resume, you must meet the statutory flight time and certification minimums established by the Federal Aviation Administration in Title 14 of the Code of Federal Regulations. While individual air carriers set their own internal hiring thresholds on their job postings, no operator can place a pilot into service below the federal baselines.

Under 14 CFR 135.243(a)(1), no person may serve as Pilot in Command (PIC) in passenger-carrying operations of a turbojet airplane, or an airplane having a passenger-seat configuration of 10 seats or more (excluding crewmember seats), unless that pilot holds an Airline Transport Pilot (ATP) certificate with appropriate category and class ratings and an appropriate type rating for that airplane.

For general Instrument Flight Rules (IFR) operations under 14 CFR 135.243(c), a Pilot in Command must hold at least a commercial pilot certificate with appropriate category, class, and type ratings, an instrument rating or ATP certificate, and at least 1,200 hours of total flight time. For Visual Flight Rules (VFR) operations under 14 CFR 135.243(b), the PIC minimum is 500 hours of total flight time.

Many private jet charter flights operate under the eligible on-demand rules of 14 CFR 135.4. An eligible on-demand operation requires a two-pilot crew employed or contracted by the certificate holder and sets specific total flight time and rating requirements for both seats.

Federal Part 135 Flight Crew Minimums (14 CFR 135.4 and 135.243, as of November 2026)

Regulatory Category Certificate and Rating Required Minimum Total Time Specific Hour Sub-Requirements
PIC: Passenger Turbojet (14 CFR 135.243(a)) ATP certificate with category, class, and aircraft type rating Per ATP and operation rules Must meet all applicable IFR and category minimums
PIC: IFR Operations (14 CFR 135.243(c)) Commercial pilot, instrument rating (or ATP), and type rating if required 1,200 hours 500 hours cross-country, 100 hours night, 75 hours actual or simulated instrument (at least 50 hours in actual flight)
PIC: VFR Operations (14 CFR 135.243(b)) Commercial pilot, instrument rating (for airplanes), and type rating if required 500 hours 100 hours cross-country, at least 25 hours at night
PIC: Eligible On-Demand Multi-Engine Turbine (14 CFR 135.4) ATP certificate and applicable type ratings 1,500 hours Two-pilot crew required. at least one pilot needs 75 hours in make and model
SIC: Eligible On-Demand Multi-Engine Turbine (14 CFR 135.4) Commercial pilot and instrument ratings 500 hours Restricted from certain takeoffs and landings if under 100 hours in make and model

Crew Pairing and Operating Limitations for First Officers

In a technical interview for a Second in Command (SIC) position, evaluators frequently test your knowledge of when the Captain must fly the leg. Under 14 CFR 135.4(a)(4), crew pairing rules for eligible on-demand operations mandate that either the PIC or the SIC must have at least 75 hours of flight time in that aircraft make or model, and if a type rating is required, for that type aircraft.

Furthermore, under 14 CFR 135.4(a)(3), if the Second in Command of a fixed-wing aircraft has fewer than 100 hours of flight time as SIC in the aircraft make, model, and type being flown, and the PIC is not an appropriately qualified check pilot, the PIC must make all takeoffs and landings in specific high-workload or adverse conditions.

You should be ready to recite these exact conditions during an oral evaluation:

  • Landings at the destination airport when a Destination Airport Analysis is required by 14 CFR 135.385(f).
  • When the prevailing visibility for the airport is at or below 3/4 mile.
  • When the runway visual range (RVR) for the runway to be used is at or below 4,000 feet.
  • When the runway to be used has water, snow, slush, ice, or similar contamination that may adversely affect aircraft performance.
  • When the braking action on the runway to be used is reported to be less than good.
  • When the crosswind component for the runway to be used is in excess of 15 knots.
  • When windshear is reported in the vicinity of the airport.
  • In any other condition in which the PIC determines it to be prudent to exercise the PIC's authority.

What the Part 135 Technical Evaluation Covers

Whether you are preparing for a virtual technical interview or your initial company training checkride, Part 135 technical questions follow the federal testing framework in 14 CFR 135.293. Under this regulation, no certificate holder may use a pilot unless, since the beginning of the 12th calendar month before that service, the pilot has passed a written or oral knowledge test and a practical competency check given by the FAA Administrator or an authorized check pilot.

By our count from 14 CFR 135.293(a), the federal oral or written knowledge test covers 8 mandatory subject areas for fixed-wing pilots (plus a 9th area specifically for rotorcraft and powered-lift pilots covering flat-light, whiteout, and brownout conditions). Reviewing these 8 areas gives you a complete study outline for a Part 135 technical screen:

  • Regulations and Manuals: The appropriate provisions of 14 CFR Parts 61, 91, and 135, along with the certificate holder's operations specifications and General Operations Manual (14 CFR 135.293(a)(1)).
  • Aircraft Systems and Limitations: The aircraft powerplant, major components and systems, major appliances, performance and operating limitations, standard and emergency operating procedures, and the approved Aircraft Flight Manual (14 CFR 135.293(a)(2)).
  • Weight and Balance: The method of determining compliance with weight and balance limitations for takeoff, landing, and en route operations for your aircraft type (14 CFR 135.293(a)(3)).
  • Navigation and Approaches: Navigation and use of air navigation aids appropriate to the operation, including instrument approach facilities and procedures (14 CFR 135.293(a)(4)).
  • Air Traffic Control: ATC procedures, including IFR procedures when applicable (14 CFR 135.293(a)(5)).
  • Meteorology: Principles of frontal systems, icing, fog, thunderstorms, windshear, and high-altitude weather (14 CFR 135.293(a)(6)).
  • Severe Weather Procedures: Recognizing and avoiding severe weather, escaping from inadvertent encounters including low-altitude windshear, and operating in or near thunderstorms, clear air turbulence, icing, and hail (14 CFR 135.293(a)(7)).
  • New Equipment: New equipment, procedures, or techniques as appropriate to the operation (14 CFR 135.293(a)(8)).

High-Altitude Oxygen and Autopilot Rules Often Asked in Interviews

Technical interviewers for business jet operators regularly test how well you know Part 135 operational rules for pressurized jets flying at high flight levels, as well as minimum altitudes for autopilot use.

Under 14 CFR 135.89(b), whenever a pressurized aircraft is operated with a cabin pressure altitude of more than 10,000 feet MSL, pilots must comply with supplemental oxygen rules. When operating at altitudes above 25,000 feet through 35,000 feet MSL, unless each pilot has an approved quick-donning oxygen mask, at least one pilot at the controls must wear a secured and sealed oxygen mask that either supplies oxygen at all times or automatically supplies oxygen whenever the cabin pressure altitude exceeds 12,000 feet MSL. Above 35,000 feet MSL, at least one pilot at the controls must wear that mask even with quick-donning equipment installed. Additionally, if one pilot leaves a pilot duty station above 25,000 feet MSL, the remaining pilot at the controls must put on and use an approved oxygen mask until the other pilot returns.

You should also know the autopilot minimum use altitudes under 14 CFR 135.93:

  • Takeoff and Initial Climb: You may not use an autopilot for takeoff or initial climb below the higher of 500 feet or an altitude no lower than twice the altitude loss specified in the Airplane Flight Manual (AFM), unless specific AFM authorization criteria are met (14 CFR 135.93(b)).
  • Approach: You may not use an autopilot at an altitude lower than 50 feet below the Decision Altitude/Height (DA/H) or Minimum Descent Altitude (MDA) for the instrument procedure being flown, subject to AFM altitude loss limitations and coupled path reference rules (14 CFR 135.93(d)).
  • Go-Around and Missed Approach: You may not engage an autopilot during a go-around or missed approach below the minimum engagement altitude specified for takeoff and initial climb. However, minimum use altitudes do not apply to a go-around initiated with an already engaged autopilot (14 CFR 135.93(e)).

Practical Competency Checks and Background Screening

In addition to oral knowledge testing, 14 CFR 135.293(b) requires every pilot in a multiengine or turbojet airplane to pass an initial and annual competency check in that type of aircraft (or an FAA-approved simulator under 14 CFR 135.293(g)). For Pilots in Command, the instrument proficiency check required by 14 CFR 135.297 may be substituted for the competency check for the type of aircraft used.

The FAA defines the passing standard in 14 CFR 135.293(e): competent performance of a procedure or maneuver requires that the pilot be the obvious master of the aircraft, with the successful outcome of the maneuver never in doubt. If the certificate holder is authorized to conduct Enhanced Flight Vision System (EFVS) operations, the competency check must also include tasks appropriate to those EFVS operations under 14 CFR 135.293(i).

On the administrative side, FAA certification guidelines for Part 135 operators require compliance with the Pilot Records Improvement Act (PRIA) of 1996 and 14 CFR Part 120 drug and alcohol testing. Under PRIA, an air carrier cannot place a pilot into service until after it obtains and reviews the last 5 years of the pilot's records. You will also complete a company training curriculum that FAA guidelines state must include Basic Indoctrination, Emergency Training, Crew Resource Management (CRM), Initial Ground and Flight Training, and Hazardous Materials (HazMat) training.

Customer-Service Behavioral Questions in On-Demand Aviation

Flying a Phenom 300 or Challenger 300/350 in on-demand charter operations places you face-to-face with passengers in a way Part 121 airline pilots rarely experience. On the flight line, you greet passengers at the Fixed Base Operator (FBO), handle catering and baggage loading, conduct oral preflight passenger briefings, and manage schedule changes directly with the client.

Under 14 CFR 135.117, before each takeoff the Pilot in Command of an aircraft carrying passengers must ensure that all passengers have been orally briefed on smoking rules, seatbelt and shoulder harness use, seat backs, location of survival equipment, normal and emergency exits, and the use of oxygen. Balancing this legal authority with warm, personalized hospitality is the centerpiece of a private aviation behavioral interview.

When practicing your stories out loud, focus on experiences where you protected safety margins without making a passenger or colleague feel dismissed. Use this checklist created by our team to structure your behavioral and customer-service preparation:

  • Safety vs. Client Pressure: Prepare a story about a time a passenger, manager, or dispatcher pushed to depart in deteriorating weather or with a mechanical issue, and how you communicated the delay clearly while offering alternatives.
  • Schedule Flexibility: Prepare an example of a day when an itinerary changed multiple times mid-trip, showing how you coordinated fuel, weight and balance, and crew rest without losing your composure.
  • Crew Resource Management (CRM): Prepare a story about resolving a disagreement in the flight deck or catching an error during a busy preflight while keeping communication respectful.
  • Direct Passenger Care: Prepare an example of going out of your way to solve a non-flying issue for a customer, such as tracking down misplaced luggage or arranging ground transport after a diversion.
  • Regulatory Briefing Compliance: Practice delivering a clear, welcoming passenger safety briefing under 14 CFR 135.117 that covers every mandatory item in plain language.

How to Prepare for Your Technical and Behavioral Scenarios

To perform well in both the technical and behavioral portions of your evaluation, practice answering questions out loud rather than reading notes silently. When an evaluator asks a scenario question combining a Part 135 regulation with a frustrated passenger, they are listening for both your regulatory precision and your tone of voice.

Start your answer by stating the safety or legal boundary clearly, such as runway contamination limits under 14 CFR 135.4 or deicing rules under 14 CFR 135.227, where no pilot may take off any time frost, ice, or snow may reasonably be expected to adhere to the airplane unless specific training and anti-icing requirements are met. Then, explain exactly how you would walk back to the cabin or FBO lobby, explain the situation in plain, reassuring terms, and present the passenger with a concrete plan.

Practice example

Tell me about a time you had to delay a flight for weather or a safety limitation when passengers were eager to depart, and how you would handle that as a Part 135 crewmember.

Example answer written by our team. The applicant is invented. Last winter, I was flying a charter trip where the passengers arrived thirty minutes early to beat an approaching snow squall. During my walkaround, I found wet snow beginning to adhere to the upper wing surface, and the tower reported braking action had dropped to medium with a twenty-knot crosswind. Under 14 CFR 135.227, we cannot take off when snow or frost may reasonably be expected to adhere to the aircraft without proper deicing treatment, and under 14 CFR 135.4, a contaminated runway with braking action less than good and a crosswind over 15 knots also triggers strict Captain-only landing and takeoff operating limits if the First Officer has under 100 hours in type. Instead of staying in the cockpit, I walked into the FBO lounge, greeted the lead passenger by name, and explained that we needed twenty minutes for a Type I and Type IV deicing treatment so the wing would be completely clean for departure. I invited them to stay warm inside with coffee while my First Officer and I coordinated the deice truck, and I gave them a firm boarding time ten minutes later.

This answer shows immediate mastery of specific Part 135 regulations (14 CFR 135.227 and 135.4) without sounding defensive or rigid. It pairs a non-negotiable safety boundary with proactive, warm face-to-face communication that keeps the passenger comfortable and informed.

Practice this on Fourstripe. Pick your airline and a captain runs the interview out loud: TMAAT, about-you, technical and scenario questions, with real follow-ups. You get a scored report on every answer. 7-day trial, then from $149 a week. Start a practice interview

Frequently asked questions

What aircraft are in the Wheels Up fleet?

According to the Wheels Up website, the company operates a fleet of Phenom 300 series and Challenger 300/350 aircraft, in addition to providing access to a vetted global charter network. Following company indoctrination and simulator training, pilots earn a Pilot in Command type rating for the EMB-505 or CL-30.

What are the federal minimum flight hours for a Part 135 IFR Captain?

Under 14 CFR 135.243(c), a Pilot in Command operating under Instrument Flight Rules must have at least 1,200 hours of total flight time, including 500 hours of cross-country time, 100 hours at night, and 75 hours of actual or simulated instrument time (with at least 50 hours in actual flight). If the flight is an eligible on-demand operation under 14 CFR 135.4, the Pilot in Command minimum increases to 1,500 hours.

Do I need an ATP certificate to be a Captain on a Part 135 turbojet?

Yes. Under 14 CFR 135.243(a)(1), no person may serve as Pilot in Command in passenger-carrying operations of a turbojet airplane unless that person holds an Airline Transport Pilot certificate with appropriate category and class ratings and an appropriate type rating for that airplane.

What are the federal minimum hours for a Second in Command in eligible on-demand operations?

Under 14 CFR 135.4(a)(2), a Second in Command in an eligible on-demand operation must hold at least a commercial pilot certificate with an instrument rating and have a minimum of 500 hours of total flight time. If the SIC has fewer than 100 hours in the aircraft make and model, the PIC must make all takeoffs and landings during specific adverse weather or runway conditions.

How often are Part 135 pilots tested on technical knowledge and flight competency?

Under 14 CFR 135.293(a) and (b), every Part 135 pilot must pass a written or oral knowledge test and a practical competency check within the 12 calendar months preceding service. Under 14 CFR 135.293(e), passing the competency check requires that the pilot be the obvious master of the aircraft, with the successful outcome of the maneuver never in doubt.

Sources